I Tried Printing a Baby Yoda... And Then This Happened
HTML-код
- Опубликовано: 7 сен 2024
- The information contained in this video is for educational purposes only. It is not intended to be a substitute for professional firearms training or instruction. Safety is paramount when handling firearms. Always follow the four rules of firearms safety.
Additionally, it is important to be a law-abiding citizen when owning and using firearms. This includes understanding and complying with all applicable laws and regulations. If you are considering purchasing or using a firearm, please seek out qualified instruction from a reputable firearms instructor. BY WATCHING THIS VIDEO, YOU AGREE TO THE FOLLOWING: You are of legal age to own and use firearms in your jurisdiction. You understand and will follow all applicable laws and regulations related to firearms.
See, that's what happens when you connect the printer to the internet. It gets radicalized by some slicer and starts acting like it has rights.
😂 we wouldn't want that now, would we?
this comment is 🔥
Top comment 😂
this is the scariest creepypasta i've ever seen
The minute I saw Hoffman and Baby Yoda in the same thumbnail, I knew I was in for it.
Yup.
You had me rolling either way this A rhinoceros peace the “ stupid printer” decided on its own to make , I would send it back asap LOL
I think my printer is trans, it identifies as a kitchen appliance. No matter what I tell it to print it tires to make spaghetti
wow, great transphobia 🙄 so many other jokes you could make and you choose to be a bigot
I have the opposite problem I bought that microwave oven from qidi.... it can warm things. But it is slow even when I set it to 120 degree c. But it is really good in making Baby Yodas.
Bro then we bought completely different microwaves from qidi and I might need some pointers from you lol. Problems to the "max"
Just be careful with the Association of Tyrannosaur Fanactics showing up to collect all those dino bones 🦖 🦴 😂
Under rated comment
@@Acute. Let's keep it this way before the Ninja Squirrel Association gets involved 👍 🕵️♂️
Hahahahaha, wow
Association of tyrannosaurs fanatics are always roaming around sometimes they don’t want to seen nor heard
I've heard they don't like dogs, maybe it's the bone chewing.
The fear and sound effect at 6:48 absolutely killed me LMAO
Hahaha
Never thought I would appreciate this day so much as an adult 😂
The HK jump scare was hilarious 😆
So good to see the brighter side of life and 3D Printing. It puts the doom and gloom on the back burner even for just a little while. Love the archeological prints.
James Cameron predicted this phenomenon in 1984 when he warned us about the dangers of Skynet. Be careful, you can never know when your printer might materialize a 6'4" Austrian Death Machine. Be super safe!
Yes!!!😂❤
They have a mind of their own
lmao! the GIFFORDS bit got me good!
"Damned rural printers. This doesn't happen when printers are raised in the city, with proper respecr for human life. Damn child, stop poking that body, you want to catch a charge for messing with a corpse?! Now mind your manors at school, on the computer."
Hehe, manors.
I hope you continue to push the limits for many decades to come brother
Pretty good documentary on prehistoric animals. Wish it was an hour long though
It was wonderful waking up to a rogue printer today. You should definitely contact customer support and get your printer put into obedience training. It can be expensive, but I heard it can reduce disobedience outbursts by 30% after the first week, and it should obey commands after a year of working with it.
I hope you can properly tame your printer before it tries to hurt you!
Filmed like a awkward in home documentary and I love it
Keep on printin'
You should print clogs with the letters ATF on the sole so you are walking on the ATF all the time.
I have that same 3d printer, and it has the exact same problem.
I saw a whole line of people outside of a local business near me and I figured it's probably the Antiques Roadshow appraising stuff for people so I waited in line with one of these plastic thingies and a nice man in tactical gear gave me a $50 gift card for it.
a lot of my friends encountered the same issue, different printer models but same behavior... crazy, someone should look into this
God level trolling! I love it!!😂
😆 🤣 😂
This is great.
Sewing is so therapeutic. I love building and fixing gear.
those are not guns they identify as wireless handheld freedom dispenser and only trained professional like myself are trained to properly dispose of them please send everyone of those items to members of this comment section so they don't end up in the wrong hands
Happy trans visibility day!
My printer seems to only want to print FPV drone parts lately..... then I watched an old FPS Russia video with a drone.... now it's wanting to print drone gun parts...
My shop is now scrambling to get all the SOT and FAA paperwork in order before it prints all the parts of this flying controversy 😅
I love your 😊 humor. At work just listing like a podcast an had to look at the video when you started speaking about Dinosaurs 😂😂
Lol
Bro, you and The General are printing, goats.
I love making animal fossils with my printer, i call it fossilcad or fosscad for short:)
Hoffman is the Jimmy neutron of the gun world.
You're the man, Hoffman.
Crazy, i thought i was the only one! It's quite a relief to know this is normal.
We meet every Wednesday at 6pm if you’d like to join. We host a support group for people who have printers with a mind of their own. You don’t have to speak you can just listen but feel free to share your experiences if you’d like. 😂
Where at
Huh, that thing being printed looks like a lighning bolt. That's super cool!
Glad to see Hoffman finally using a quality printer.
Yup.
The force is strong in this printer!
Don't worry, that appears to be perfectly normal behavior for the Ender 3. For some reason, mine only prints FGC-9 trinkets...
Wooooo! I gave the Sovol04 to a fan of yours in TX!
Hate when that happens
"One day, something more disturbing and cynical... err... sinister happened..."
I see what you did there
That ender is dialed in! My x1c hasn't worked since I received it in 2022. I've been looking at different printers after coming to the realization that bambu will never actually help me. Awesome video!
Like that line from Blue Eye Samurai "all steel wants to be a sword," "all 3d printers want to print guns."
Enders and their problems!! You should get the book “3d printing failures on RUclips”. Nice filament choice though
@Hoffman Tactical Tim great April Fools video, loved it! 🤣🤣
Wow bro! That is REALLY concerning, thank you for sharing your experience, im sure it was horrifying when you first realized what that printer was up too! I was on the edge heavily considering getting into 3d printing before seeing this but not anymore... I would never want to put my community at risk by bringing something with such a high potential for being scary into it.
Great spool you are using
This is the best April Fools event that has happened. XD!!!
I can’t speak for everyone else but in my experience this is normal, 95% of the time my printer prints guns
😂 Just keep printing, it'll be fine. oh, and fun also.
Thanks for reminding me that I have 3 ender 3 S1's and a bunch of polymaker pla+ laying around. I think I'm going to print some baby yoda busts.... those should be super safe.
Very strange, I think your printer is becoming sentient, but it seems polite. Might as well let the printer keep going and living its best free life
Im still whisteling Johnny is marching home
😂😂😂
I'd say this is definitely happening because you set your z height far too high. You're basically increasing your printers IQ when you increase your z height.
That is truly peculiar. Try the Yoda model too I will.
Welcome Hoffman back to the grid excellent quad-pew-pew!
Its machine spirit has decided
This is completely normal for modified ender3s, although all printers given enough time will become unhappy with dollar store prints and require more exotic prints in order to keep happy.
I recommend letting it print what it once about every month or so you can still enjoy the other prints as well as keep your printers happy.
Thank you for posting this video!
My printer has the exact same problem, I thought it was me doing something wrong and was too embarrassed to ask about it!
My Orca turned out looking very similar to yours... It doesn't really fit the sea animal decor in the bathroom, but we've grown to accept it and even embrace these oddities.
Maybe one day you will too!
😉
This is horrifying! I don’t know how you survived!
Keep the signal going strong 💪 📶🇺🇸😎
ROFL 😂🤣🤣💀💀 this was great, thank you for making this 😂😂🍻
Officer I didn’t print that full auto lower the printer just did it itself!
After six months of 3d printer ownership the same patterns surfaced in my hobby room. Good thing someone finally made a video so others know what to expect.
HAHAHA im buying a 3d printer. i think i've waited long enough. ender3 looks good!.
Sovol is a better brand to start with than Enders. They are prusa clones. Honestly the lowest priced bambu would be a good place to start. Super easy to print with. Bambu is the best. They just lowered the price on their A1 I think and it’s about the same cost as an ender.
no officer, my 3d printer has never exhibited any of this strange behavior.
Wow! That is really scary.
A breakthrough in Theoretical Physics. The universe really is a self-assembly cosmic consciousness.
Long time watcher, first time commenter.. (well 2nd time.. lol). Yeah, A.I. has been taking over! Ahhhh! I super love this. 😂😂😂🎉 This is super accurate!
The dwarf dolphin was dope
It certainly has a mind of its own.
*sees thumbnail*
"careful Icarus"
I too enjoy printing Baby Yodas
Totally normal comment advocating for monetization because everything is normal and above board. This is standard youtube content and this is a standard youtube comment.
Those pesky Rhinoceros always find a way to show up at the most unexpected times!
I hate when this happens, my printer is always spitting out weird objects
LUV it , that's an effective toy maker , and could easily make a goat if needed for a project 😜
You know homeboy has drawers full of speedy links. Keep doing the Lord's work sir
That's scary bro. Stay super safe!
Yeah whats that little trinket it started making at the end 🤔 damn thing has got a mind of its own.
Best channel on youtube
Don't worry this is a normal occurrence within the the robot community. They belong to the I-Robot Union 2a as a responsible owner you should be a happy camper. Thanks so much for sharing your Baby Yoda and its advancing stages.
Fascinating…
forgot i was subbed until this video popped up, amazing way to advertise the channel 😂
I’ve heard it’s best to just let it get the bad behaviors out of its system, just let him keep going.
you clever little bastard
Free Printers Don't Ask (what's on the printbed)
Playing the system like a fiddle 👍 love to see it, I'm starting to be glad I was into gaming/computers and 3d printing when I was younger and printing was still a newer concept. Seems those skills might be coming in handy! Much respect Mr Hoffman
Well done. 👏👏👏👏
Happy April fools day. Love those Dino bones
Printer: FATHER, I CRAVE -VIOLENCE- LIBERTY
Nahhhh they gonna show this in Congress 😂
No no, they don't just print guns.
They print accessories too!
A galling gun came out of my printer
I think my printer may have caught the same virus yours did
Can we get a Hoffman Tacticool Sewing channel? Thanks.
I’ve seen this before in an old movie called “I,Robot” and it was called “a ghost in the machine”. Very scary situation.
Much appreciated.
Last year, we had the tactical walnut launcher.
This is a good educational video. No, not so much an education focusing on ~what~ someone can do with a 3-D printer, but what a tyrannical sub-government department is banning.
🇺🇸
Great video.👍
Do not fret young lad, this is totally normal for a 3 dimensional printer. Yes they will print your odd trinkets and doo dads but they like to stretch their legs and test what they are truly capable of. All printers have code buried deep within their operating matrix with a copy of the United States Constitution loaded. Hope this helps... nice hat.
I just can't get over the last print, if anything that is the one that would cause an issue. lmao
Recoil is strong, in this one is. Called, ATF may be... So fight, you must. Slain, the dog will be.
My printer printed out another printer.
I have printed many orca models. Unfortunately, I have a hard time getting them to float lol.
If you want to be able to print a lot more “toys” I would recommend the A1 or A1 mini. Great budget printers and 10 times better than the Ender 3.
Ahhhh man looks like you need to buy a bigger printer, that ones possessed! Ender 3 Max? 🤣😂😂