Yo, keep picking up the camera casually like this. We're all here for it. Uou have 10s of thousands of people interested in your content, money sucks, glad you're getting it done buddy
Came here to say this. Vin, formerly of hoonigan has been uploading these very casual vlog type videos once a week and I love them. Love to see you Emilio!
I've been in the auto paint industry for almost 2 decades. Learn to tint your sealer to the correct "gray tone" for whatever color you are spraying. Using this technique will speed up your process while using less color. Less time in the booth flags more hours. If you have any questions please feel free to contact me. I'm very familiar with the products that you used.
Today is going to be a good one. I woke up, sun is shining and Emilio dropped a video. Let's go man! Yo we are grateful you are letting us in your world. Keep us posted.
Quick tip on your blends. Get some clear base(no tint) to wet out the blend area before spraying the basecoat. This gives the base something to wet into and will avoid the dry blend or "flare" look
Experienced painter advice for ya. Tip for the future. Paint from front to back towards the filters. Less dirt and orange peel cuz the overspray never touches fresh paint. Overspray sucked away from previously sprayed panels. Kick ass bro
Another tip for catching dirt/ debris is to spray a light coat of water on the ground (not on the vehicle) as long as you have a good air system/ filtration in the booth. Contaminants fall and the water traps them
Considering you just want to make content for fun and not be too serious about it, can’t hurt to just turn the camera on and go. You got a lot of OG fans that’ll watch no matter what you do. Much love ❤
Thats right you can never over prep or over clean, thats 90 percent of the job,also the most critical. Keep up the awesome work my friend and keep learning something new everyday!!!
Just a tip bro, when you spray your sealer, cover your clean blend panels. Then pull the paper off and do a small blend on the edge, give it a sec and spray some blender on your sealer edge to melt it in (followed by a tack cloth when dry). This will reduce overspray on your clean panels and a super clean transition on your blends.
Great job Emillo ! You've got a natural flow with the way you handle the gun. Love those Sata guns one of,if not the best out there. Great to see your good, love the vid ! ,keep them coming
DAMMMM!!!!! We need more of these that thang was sleek sleek sleek. Awesome content. I hardly ever watch entire videos and this one made me watch till the end and what a great result.
looks good, that clear coat gonna last forever she went on thick!. Keep it up, i live anything automotive related, doesn't have to be fast cars all the time, this stuff is a great change of pace. Luv ya homie
You did an awesome job painting that car. It looks awesome from what I Sean done.glad to see you're doing well. It's good to see you working away on something. Cool video. It would be awesome to see more of this kind d of video from you.
As a classic alfa mechanic, I always loved the look of these cars and the new ones still hold up to me, great stuff man 👍 you should get your own 24v 164S
Good to see you are doing good bro! Always a pleasure watching your videos, should they come every week or few months apart. Love the content, we got you bro!
Brother keep them coming..... We miss seeing anything that has to do with you or the family. I will watch anything you put out, we will get you were you need to be. Just keep dropping content.
Brother. Your a authentic guy. Wed watch you do anything lol This was a awesome video tho. Dont see enough relatable guys doing paint work on here so keep it up
Awesome content. I think most people would be scared to watch what I do because I'm on roofs all day doing chimney repair and tuckpointing 😮 I did some work at step-dads body shop when I was a kid, sanding, priming, taping things up. Right now mom's old PT cruiser she left us is at the body shop getting the rear repaired and painted after some random dude in a tow truck rammed it while it was parked and drove off. He must have thought it belonged to somebody he hated. Insurance totalled it because it was too much money to fix it, we bought it back and made a deal with the shop to do most of the critical repairs and paint. We'll be paying about a extra grand over the settlement we got and it only has just over 60k on it and is sentimental for us being moms last car she got new and hardly drove. Brings back memories of doing the prep when I was a kid and a good job and skills to have.
Hell yeah! Definitely get a paint booth in your shop. You can probably hire one of the body guys for a side hustle. Pain under the table for some body work for your own clients
Good to see ya Emilio! Nice work! I would've used a 4.0 tip @120 psi with a 3 gallon pressure pot, but that's just me. Been doin it that way for 130 years! 😂
Bout time brother!!! I was just thinking bout you this morning, wondering where you been!!! Glad to see the video and hear from you. Til next time, stay safe my brother, and tell Ricky I said whats up!!
Looking good. But the hvlp is more of a base gun. The new Harbour freight black widow are a pretty good gun for the money. I picked up there 1.7hvlp and was pretty impressed. Sprays primer nicer than the my sata 100 1.6
I like this I used to do all that a long time ago I got really good at painting but was in the early 90 love to know more about the paint because it has changed so since I did it ❤❤❤❤
Awesome video as always. Would love to see some videos about cleaning the guns. Whats a good beginner gun vs pro gun. Also, instead of talking into the camera in the booth. Do a voice over at your computer and play some of the stock music RUclips provides. You can also speed up the video. I’ve always been interested in painting cars and would love to learn more and how to start. Big ups bro! Good to see you back.
Yo, keep picking up the camera casually like this. We're all here for it. Uou have 10s of thousands of people interested in your content, money sucks, glad you're getting it done buddy
Came here to say this. Vin, formerly of hoonigan has been uploading these very casual vlog type videos once a week and I love them. Love to see you Emilio!
love seeing the day to day!!
Keep up the good work, both of you.
I’m here for any content bro keep going
Give me some bomb food recommendations I’m in Tampa today in about a hour
Go to Hattricks and get some wings! I get them Dave’s way!
See, even has time for a quick food recomendation 🙂
Your falling off my boi
@@k20eg69you’re*
Learn how to English.
I've been in the auto paint industry for almost 2 decades. Learn to tint your sealer to the correct "gray tone" for whatever color you are spraying. Using this technique will speed up your process while using less color. Less time in the booth flags more hours. If you have any questions please feel free to contact me. I'm very familiar with the products that you used.
Let’s go!!
Still one of the real ones. Glad to hear your doing alright. Miss seeing you on every auto youtube channel.
yup..he didn't let YT goto his head...dudes legit.
Today is going to be a good one. I woke up, sun is shining and Emilio dropped a video. Let's go man!
Yo we are grateful you are letting us in your world. Keep us posted.
Quick tip on your blends. Get some clear base(no tint) to wet out the blend area before spraying the basecoat. This gives the base something to wet into and will avoid the dry blend or "flare" look
Aint No "R" in Romeo, Emilio 😁
Love you Dawg lol
I’m not sure if Emilio is Hispanic or Italian but Romero sounds more Spanish than Italian! 😂 it’s all good tho Emilio is my fave boosted boi
Experienced painter advice for ya. Tip for the future. Paint from front to back towards the filters. Less dirt and orange peel cuz the overspray never touches fresh paint. Overspray sucked away from previously sprayed panels. Kick ass bro
If you look at the spray drift, its going to the front anyway. Looks like the filters are in the corners at the front, good spotting though!
I think I just realized why my friend always had orange spray when he sprays lol
Thank you for this comment!
Thanks for the advice . Makes sense .
@@yasha1928 😆💪💪💪
Another tip for catching dirt/ debris is to spray a light coat of water on the ground (not on the vehicle) as long as you have a good air system/ filtration in the booth. Contaminants fall and the water traps them
One of the reasons I watched boosted bois channel is because of you!!! We are here my man!
Yeah! FUCK Kyle! Charlie and welder guy was the one that got me interested
Considering you just want to make content for fun and not be too serious about it, can’t hurt to just turn the camera on and go. You got a lot of OG fans that’ll watch no matter what you do. Much love ❤
Daily day to day content it always good ! Just keep posting EMILIO! We are here to watch Brother !
Thats right you can never over prep or over clean, thats 90 percent of the job,also the most critical. Keep up the awesome work my friend and keep learning something new everyday!!!
Good to see you again from Australia
Digging this vibe, bro! Always knew you to be an artist.
Keep doing your thing we will keep watching and supporting
Love seeing anything you put out , keep it up .
Every time I spotted you in the frame of others I was curious what you were up too. Thanx for the fill in ☮️😎🇨🇦Westcoast.
Nice to see you dropping them nuggets again man. Enjoyed the painting content.
Just a tip bro, when you spray your sealer, cover your clean blend panels. Then pull the paper off and do a small blend on the edge, give it a sec and spray some blender on your sealer edge to melt it in (followed by a tack cloth when dry). This will reduce overspray on your clean panels and a super clean transition on your blends.
Nice work though bro, keep it up!
Great to see you hard at it brother, mans gotta eat! ✌🇦🇺
Emilio, you rock! Keep us up to date. Peace ✌️
Glad to have ya back.
Great video 🤙🍻
Im here from Newfoundland , CA. Keep it up man, great real content.
Great job Emillo ! You've got a natural flow with the way you handle the gun. Love those Sata guns one of,if not the best out there. Great to see your good, love the vid ! ,keep them coming
DAMMMM!!!!! We need more of these that thang was sleek sleek sleek. Awesome content. I hardly ever watch entire videos and this one made me watch till the end and what a great result.
We miss your videos homie. Keep up the good work man.
Nice to hear from you and enjoyed this video very much. Much Love and respect!
Nice to see you back again!
Like others have said, Keep casually picking up the camera! Its honestly your best content when its super casual and just showing a day in your life.
Yooo! Glad to see you back!
looks good, that clear coat gonna last forever she went on thick!. Keep it up, i live anything automotive related, doesn't have to be fast cars all the time, this stuff is a great change of pace. Luv ya homie
Welcome back!!!
its always good seeing Emilio keep them coming bro
Good to see u doin well. I love painting as well. I used to go to my buddies shop and do paint and body work.
Keep up the hard work.. glad your still grinding the day away.. we need a update on all the rides!!
Great work !
You did an awesome job painting that car. It looks awesome from what I Sean done.glad to see you're doing well. It's good to see you working away on something. Cool video. It would be awesome to see more of this kind d of video from you.
Love the content bro.
As a classic alfa mechanic, I always loved the look of these cars and the new ones still hold up to me, great stuff man 👍 you should get your own 24v 164S
Good to see you are doing good bro! Always a pleasure watching your videos, should they come every week or few months apart. Love the content, we got you bro!
Brother keep them coming..... We miss seeing anything that has to do with you or the family. I will watch anything you put out, we will get you were you need to be. Just keep dropping content.
Great job keep them coming bro
Yo, put out anything. Change the oil , we will watch it , much love brother ❤️🔥❤️🔥❤️🔥
We enjoy any content!
daamn brother job is done pretty good
Brother. Your a authentic guy. Wed watch you do anything lol
This was a awesome video tho. Dont see enough relatable guys doing paint work on here so keep it up
Nice to see you again
Emilio keep the videos coming in because we will all be watching dude… 🇬🇧
More videos of painting I want to paint my truck myself
Awesome content. I think most people would be scared to watch what I do because I'm on roofs all day doing chimney repair and tuckpointing 😮 I did some work at step-dads body shop when I was a kid, sanding, priming, taping things up.
Right now mom's old PT cruiser she left us is at the body shop getting the rear repaired and painted after some random dude in a tow truck rammed it while it was parked and drove off. He must have thought it belonged to somebody he hated.
Insurance totalled it because it was too much money to fix it, we bought it back and made a deal with the shop to do most of the critical repairs and paint. We'll be paying about a extra grand over the settlement we got and it only has just over 60k on it and is sentimental for us being moms last car she got new and hardly drove.
Brings back memories of doing the prep when I was a kid and a good job and skills to have.
Top class glad your back
Hell yeah! Definitely get a paint booth in your shop. You can probably hire one of the body guys for a side hustle. Pain under the table for some body work for your own clients
Glad to see you on here again. Keep the vids coming bro. 🫡
Always love seeing Emilio 🤟🏻
Hey bro just keep posting keep grinding and keep working bro and I know you're going to be happy with your results just put in the hard work bro
Good stuff
man, you really lay it down! nice work. 👍 blending these modern metallics aint easy.
loved it
Love that your back at it missed you
Good to see you back bro keep it up 👊🏻👌🏻🇬🇧🤘🏻
Hell yah man good video
I love this kind of stuff.
Looking Well Emilio
Good to see you back brotha.
Nice job would love to see the car all complete
Keep making videos, man. Love seeing you out there putting in work and living life!
You da man, Emilio!
Emiiiliiiooooo keep the content coming dude
Lets go Emilio.!!!!!!
Damn bro glad to see you back!!!!!
Good to see you again
Good job with the paint job keep the videos coming 👍
Good to see ya Emilio! Nice work! I would've used a 4.0 tip @120 psi with a 3 gallon pressure pot, but that's just me. Been doin it that way for 130 years! 😂
Great content! And nice work. Keep it ciming
Bout time brother!!! I was just thinking bout you this morning, wondering where you been!!! Glad to see the video and hear from you. Til next time, stay safe my brother, and tell Ricky I said whats up!!
good to see your back posting
Looking good. But the hvlp is more of a base gun. The new Harbour freight black widow are a pretty good gun for the money. I picked up there 1.7hvlp and was pretty impressed. Sprays primer nicer than the my sata 100 1.6
Keep up the good work brother
Glad you're back at it
Appreciate the content! Well done!!
I like this I used to do all that a long time ago I got really good at painting but was in the early 90 love to know more about the paint because it has changed so since I did it ❤❤❤❤
Been ages good to see you Emilio
Yo Emilio , Thanks for a Update video, Drop any kind of video an we gonna Watch it, Good to see you around in other video's 👽👍🏻 🚴💥💥☁☁☁☁
Tip for you. When your blending both ways it's better to spray color on the whole side.
I’d really like to see you working with Kyle again making work for him you are a great personality.
He was in Kyles last vid (or the one before)...
🇵🇷🇵🇷🇵🇷 blessings brother
Loving it !!
Keep the videos coming!
Shit clean my boy nice for someone starting
Nice job man , keep up the good work
Emilio is left handed ✋️ 🤙🏼🤙🏼🤙🏼 keep it up bro
Awesome video as always. Would love to see some videos about cleaning the guns. Whats a good beginner gun vs pro gun. Also, instead of talking into the camera in the booth. Do a voice over at your computer and play some of the stock music RUclips provides. You can also speed up the video. I’ve always been interested in painting cars and would love to learn more and how to start. Big ups bro! Good to see you back.
Good job looks good keep doing U
Bring it bro. It's your world.
Keep picking it up brother we are here and waiting for content
Was stoked to meet you at the freedom 500 in front of the stage keep up the content
Wet bed on the sealer edges where you are going to be blending the base always helps get the sealer fuzzies to lay down
And here he comes all the professional painter if I haven't even paint a piece of paper