That video was so awesome and inspiring. I want to make decals now! I have a heat press and a cricut explore air. Can I achieve rhinestone projects with what I have?
Hello. This video is very informative. Thanks so much. Quick Question please.... Do you have to use "flock" or what other Heat Transfer material can be used? Thanks in advance
We recommend using Magic Flock to hold the stones together properly. We also use rhinestone transfer tape to transfer our project over. www.therhinestoneworld.com/Acrylic-Rhinestone-Hot-Fix-Transfer-Tape-12_p_1147.html -TRW Bri
What's the difference in the green tape and the acrylic hot fix tape? I am about to purchase the pink heat press, and a few other things. Just making sure that I am getting what I need.
Hey Carla, The green tape that you saw in the video was the sheet that protected the mat when you use in the Silhouette Cameo 3. The Acrylic Hot Fix tape is when you want to transfer your rhinestones from the magic flock to a shirt or decal. If you have any more questions feel free to give us a call (941) 755-1696 or email us a info@therhinestoneworld.com TRW Aaron
Lisa, recently I watched one of your demonstrations and loved it because I am so new to Silhouette and you took the time to show step by step how to ... You sent me an email because I was about to send my Cameo 4 back as could not get any help. It's a long story. Anyway, I followed what I found online, got my nerve up, and tried my first cut. You sent your number to me so I could call, but I can't find it. Sorry. The problem? I chose the mat, etc, but when I sent it to my Cameo, it cut the mat and what little it went on the vinyl, did not cut at all. I went back to my settings to check everything and it was the same thing when I tried again. I don't know what to do and the little company I purchased from won't respond. Can you help me, please? JoAnne
@@TheRhinestoneWorld Hi, thank you so much for your response. I appreciate it so much. I decided to send the Silhouette back as the company never would respond to me. Thank you again.
I have seen you show how to separate 6's and 10's in 3 different videos! Do you only work wit those sizes, therefore have only nixed those 2? While I find all 3 of those videos helpful, I need to know how to separate more than just those two sizes. Or find out if there is something I can purchase that separates them for me...you know, kinda like how you can buy coin separators?? Or even a creative hack. Any help, suggestions, hacks, products would help (as long as it is not ss6 or ss10...I've got that down from the 3 videos I have seen) Thank you
Hi there - I have a couple of follow up questions before I can provide you with the best information. We work with a variety of rhinestone sizes. If you're able to, please reach out to us via DM, email, or phone. 941-755-1696 info@therhinestoneworld.com Facebook or Instagram DMs are always open - TRW Haley
Hi Lisa, my cameo is not working with my computer, it was fine, now it’s telling me device not connected, I’ve checked the ports, everything is plugged in, it won’t work 😩
I was considering buying a brother scan n cut but after watching this video now I want a silhouette 3. Does the silhouette three have the usb portal? What difference are there between silhouette 3, scan n cut cm900 or cricut?
Julie, The Cameo 3 does have a USB port. I can't speak on the other cutters as I'm not familiar enough to describe the differences. We would be happy to answer any questions about the Cameo 3 though! TRW Alexis
The same exact way. We have thousands of fonts and rhinestone designs on site to choose from. If you're using Design Space then when you open the zip folder after download, you'll use the Crafter File. If anything is marked Live Template on the listings, do not get those. They're for the Wizard and will not work correctly on other softwares. Go into our channel here in RUclips, and search the magnifying glass for cricut. Tons of videos pull up with us showing how to use these materials with a Cricut. -TRW Crystal
Hey I have the Silhouette Cameo 3 and I also have the Designer Edition, I don't understand why yours look different than mine. Mine looks very outdated any idea how I can fix this ?
When you lift up that bar to feed your mat is the whole bar supposed to lift up or just that like middle to far right supposed to lift up? And most of the time and I lock my roller it doesn’t necessarily go all the way down to the lock is that right? Because sometimes when I feed my vinyl it starts like surfing I guess you could say like going side to side like it’s going all wacky it doesn’t stay on track like it supposed to why would it be doing that?
The bar would not come all the way off, when locking the bar you would still need to make sure the material is under the the rollers so that way your material would not move around so much. Also if you have a cutting mat we would recommend using one. If you are still having any issues feel free to reach out via email info@therhinestoneworld.com or call us at 941-755-1696. Thank you for watching, -TRW Bobbi
TheRhinestoneWorld I know the bar doesn’t come off but only the right side lifts up I wasNt sure if that how everyone’s is since I bought mine gently used. Even when the roller is on the mat sometimes it swivels like that I’ve wasted so much vinyl from it happening. And yes I use a mat so it the roller suppose to be on just the mat or a little on the vinyl as well ?? Thankyou
May I make a suggestion? In as much as the current version that TRW is offering for sale is SilhouetteStudio 4, don't you think it would be pertinent to make an equivalent video showing the actual current user interface? The interface you are showing has little resemblance to the distribution version. For instance, at 5:08, your video is showing a "Cut Conditions" panel, which, as far as I can tell, does not exists in 4.
Barbara, For a lot of the videos using Version 3, we have remade the videos using Version 4 so that we have videos for people who are still using the old and the new! We're working on re-making more for the newest version! TRW Alexis
Are you using the auto blade? We've found it to be a bit finnicky. Here are our recommended cut specs for the Cameo: www.therhinestoneworld.com/colorspark-cut-settings We also use our TRW Clean Cut blades in the cb09 Graphtec Blade holder, which fits perfectly in the grey plastic housing that comes with your Cameo 4. Copy/paste this link to check out our video on how we're getting such clean cuts with our Cameo: ruclips.net/video/_Jdyvz0dT0U/видео.html Let us know if you have any other questions. We're here to help. -TRW Pilar
Is it a new cutting mat per chance, and are you peeling the flock backing and placing it directly to the mat? If the mat is new, I like to season the mat. This means pressing a clean lint free tee shirt to it a few times to take that grip down a notch. If it's ripping while on the mat cutting, you may try to experiment with the cut settings starting from the guide that TRW Pilar has attached above. Let us know if you're still having issues, we'll do our best to help! -TRW Crystal
Hi. I have used Gem Tec (Xpres), but it is no longer produced. It was 0.5mm thick and very good to use. Could you advise me a stencil film to use for the application?
The only rhinestone template material we sell is the Magic Flock. www.therhinestoneworld.com/Main-Category/Heat-Applied-Materials/Subcategory-1/Rhinestone-Production-Materials/Subcategory-2/Magic-Flock-Template-Material TRW Alexis
Yes everything's the same as to how to make the rhinestone design, you just wouldn't use the Bling Anything material. You would just directly press it to the shirt. -TRW Mireya
Maricela, Yes you can use the Cricut to cut the Magic Flock. The software may be the only limitation as you will need the ability to place SS sized stones. TRW Casey
Thanks, what do you recommend me purchase for a beginner. I am excited to work on heat press and rhinestone shirts. I already have a heat press and off course the cricut. Seriously I'm thinking about the cameo just to work with rhinestones. idk please let me know so I can place a purchase asap..
Mary Anne, You should be able to use your Cricut, however we do tend to see some issues with Design Space bringing designs in (particularly rhinestone designs) and stretching them up which cuts the holes too large. TRW Alexis
Thanks for your support! Sorry we missed your comment! We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have. If you're still following - awesome! If not, we'd love to have you back! We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways! (To join, hit subscribe and during the live that opens a Live Chat button!) Hope to see you there! -TRW Crystal
Unfortunately, we don't have a Cricut Maker, but we have made some videos using our Cricut Joy and Explore! ruclips.net/video/NK_2TgDVnHA/видео.html&t -TRW Bri
The most basic size used is the ss10 and you would need to get Hot-fix rhinestones, usually the most popular color is crystal. Hope this helps. -TRW Bobbi
You need Magic Flock, Bling Anything Material, and Acrylic Rhinestone Transfer Tape. They're available on our website here: www.therhinestoneworld.com/Bling-Anything-Decal-Material_p_2007.html www.therhinestoneworld.com/Acrylic-Rhinestone-Hot-Fix-Transfer-Tape-12_p_1147.html www.therhinestoneworld.com/Magic-Flock-by-the-Foot-12_p_2004.html -TRW Bri
I cant seem to find the setting for the "rhinestone" on the silhoutte softeware 4.0.1052 version. i had the version you had. then it updated and it isnt any where to be found. please help me.
to make the images into rhinestone designs to be cut out... i guess both of what your talking about. very new just trying to see if i can even work with it before i buy any materials to try or make these types of things
Silhouette has an app! :-) . . Sign up for emails, and stay up to date on Free Live Trainings and Sales here: lp.constantcontactpages.com/su/p1fq54w/TRWdeals -TRW Crystal
Would have been nice if you would have started from imported the photo and how to get to the rhinestone portion for people who are totally knew to the CAMEO like ME.. :) - I am lost. SO I need to fins a beginners video..
Thanks for the support! Sorry we missed your comment! We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have. If you're still following - awesome! If not, we'd love to have you back! We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways! (To join, hit subscribe and during the live that opens a Live Chat button!) Hope to see you there! -TRW Crystal
Hello! While it is not available in the basic edition of Silhouette Studio, it is available in Designer and Business Edition. Let us know if you have any other questions. - TRW Richard
Hi Dana, that is the Silhouette Cameo Autoblade. You can find it on our website here: www.therhinestoneworld.com/Silhouette-Cutter-Blades--Auto_p_17657.html
That's our Magic Flock Rhinestone Template Material. I have linked it below for your convenience. www.therhinestoneworld.com/Magic-Flock-by-the-Foot-12_p_2004.html - TRW Haley
Thanks for your support! Sorry we missed your comment! We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have. If you're still following - awesome! If not, we'd love to have you back! We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways! (To join, hit subscribe and during the live that opens a Live Chat button!) Hope to see you there! -TRW Crystal
Hey Leticia, In the Silhouette software v4 you want to go to "Panels" at the top menu and then select the word "Rhinestone". Then you will see a panel on the right hand side! - TRW Aaron
You make it look so easy and very fun! I have so many ideas now. Thanks for your time and showing newbies like me how it works!
Great video! I loved how you talked through the potential 'problems' and how to address them.
Thank so much for taking your time to help me and others . Amezing. Will continue to follow. 🧡
You are so welcome! So glad that we can help 😊
-TRW Mireya
That video was so awesome and inspiring. I want to make decals now! I have a heat press and a cricut explore air. Can I achieve rhinestone projects with what I have?
Yes you can! Matt has a couple of videos of him cutting Magic Flock with different cutters on RUclips!
-TRW AL
Appreciated and what a lovely smile thank you both. 😊
Our pleasure! -TRW Crystal
This tutorial that you both created is amazing. I am yet to find another so well done.
Hi...You came down my TicToc Line and I feel in love with this material. I do have a question... Will this work with the Cricut Joy?
Here is a video that may be able to help you!
ruclips.net/video/licvNjLEsek/видео.html
-TRW Abby
Hello. This video is very informative. Thanks so much. Quick Question please.... Do you have to use "flock" or what other Heat Transfer material can be used? Thanks in advance
We recommend using Magic Flock to hold the stones together properly. We also use rhinestone transfer tape to transfer our project over.
www.therhinestoneworld.com/Acrylic-Rhinestone-Hot-Fix-Transfer-Tape-12_p_1147.html
-TRW Bri
Hi Lisa. Great video. Can you tell me what the bling anything material is used for.
loving everything that you do
I love watching videos with Lisa.... you are so clear. Do you still make videos for TRW?
What's the difference in the green tape and the acrylic hot fix tape? I am about to purchase the pink heat press, and a few other things. Just making sure that I am getting what I need.
Hey Carla,
The green tape that you saw in the video was the sheet that protected the mat when you use in the Silhouette Cameo 3. The Acrylic Hot Fix tape is when you want to transfer your rhinestones from the magic flock to a shirt or decal. If you have any more questions feel free to give us a call (941) 755-1696 or email us a info@therhinestoneworld.com
TRW Aaron
Lisa, recently I watched one of your demonstrations and loved it because I am so new to Silhouette and you took the time to show step by step how to ... You sent me an email because I was about to send my Cameo 4 back as could not get any help. It's a long story. Anyway, I followed what I found online, got my nerve up, and tried my first cut. You sent your number to me so I could call, but I can't find it. Sorry. The problem? I chose the mat, etc, but when I sent it to my Cameo, it cut the mat and what little it went on the vinyl, did not cut at all. I went back to my settings to check everything and it was the same thing when I tried again. I don't know what to do and the little company I purchased from won't respond. Can you help me, please? JoAnne
Hi Joanne! Lisa is no longer with the company, but we are happy to help! Give us a call at 941-755-1696.
- TRW Haley
@@TheRhinestoneWorld Hi, thank you so much for your response. I appreciate it so much. I decided to send the Silhouette back as the company never would respond to me. Thank you again.
I have seen you show how to separate 6's and 10's in 3 different videos! Do you only work wit those sizes, therefore have only nixed those 2? While I find all 3 of those videos helpful, I need to know how to separate more than just those two sizes. Or find out if there is something I can purchase that separates them for me...you know, kinda like how you can buy coin separators?? Or even a creative hack. Any help, suggestions, hacks, products would help (as long as it is not ss6 or ss10...I've got that down from the 3 videos I have seen) Thank you
Hi there - I have a couple of follow up questions before I can provide you with the best information. We work with a variety of rhinestone sizes. If you're able to, please reach out to us via DM, email, or phone.
941-755-1696
info@therhinestoneworld.com
Facebook or Instagram DMs are always open
- TRW Haley
Hi Lisa, my cameo is not working with my computer, it was fine, now it’s telling me device not connected, I’ve checked the ports, everything is plugged in, it won’t work 😩
Great video. Any alternative for flock sheet. Am from india not getting here soo
Hey there! I'm not sure of any alternatives. However, we do ship all materials internationally!
- TRW Haley
how much is delivery to UK. as UK I cannot find many suppliers thank for cameo 3
I was considering buying a brother scan n cut but after watching this video now I want a silhouette 3. Does the silhouette three have the usb portal? What difference are there between silhouette 3, scan n cut cm900 or cricut?
Julie,
The Cameo 3 does have a USB port. I can't speak on the other cutters as I'm not familiar enough to describe the differences. We would be happy to answer any questions about the Cameo 3 though!
TRW Alexis
Wonderful lesson. Thank you.
Susan come on now! LOL. She mentioned the tweezers twice for a reason!! LOL. just joking around this is an AWESOME tutorial!!
Hee hee... chuckle chuckle. I was thinking the same thing while watching. Susan has great patience. Great video.
Wonderfulhowan one know the price of pressing machine and get all helpneed i am a starterlove it is a wonderfulwork
If you have a cricut explore3,can,and how ? Would you do this? ❤
The same exact way. We have thousands of fonts and rhinestone designs on site to choose from. If you're using Design Space then when you open the zip folder after download, you'll use the Crafter File.
If anything is marked Live Template on the listings, do not get those. They're for the Wizard and will not work correctly on other softwares.
Go into our channel here in RUclips, and search the magnifying glass for cricut. Tons of videos pull up with us showing how to use these materials with a Cricut.
-TRW Crystal
I am unable to find the list of supplies that you used for this project. Am I missing them somewhere?
We have starter kits available on our website!
www.therhinestoneworld.com/Rhinestone-Decal-Sample-Kit_p_1238.html
-TRW Bri
What cutter do you use and how much does it cost???
Can you guys demonstrate with the Cricut Air?
Great Video Thank you.
Glad you liked it! ❤️️
- TRW Haley
Hey I have the Silhouette Cameo 3 and I also have the Designer Edition, I don't understand why yours look different than mine. Mine looks very outdated any idea how I can fix this ?
You can update your software through Silhouette's website: www.silhouetteamerica.com/software. That should fix the issue - TRW Shannon
When you lift up that bar to feed your mat is the whole bar supposed to lift up or just that like middle to far right supposed to lift up? And most of the time and I lock my roller it doesn’t necessarily go all the way down to the lock is that right? Because sometimes when I feed my vinyl it starts like surfing I guess you could say like going side to side like it’s going all wacky it doesn’t stay on track like it supposed to why would it be doing that?
The bar would not come all the way off, when locking the bar you would still need to make sure the material is under the the rollers so that way your material would not move around so much. Also if you have a cutting mat we would recommend using one. If you are still having any issues feel free to reach out via email info@therhinestoneworld.com or call us at 941-755-1696.
Thank you for watching,
-TRW Bobbi
TheRhinestoneWorld I know the bar doesn’t come off but only the right side lifts up I wasNt sure if that how everyone’s is since I bought mine gently used. Even when the roller is on the mat sometimes it swivels like that I’ve wasted so much vinyl from it happening. And yes I use a mat so it the roller suppose to be on just the mat or a little on the vinyl as well ?? Thankyou
May I make a suggestion? In as much as the current version that TRW is offering for sale is SilhouetteStudio 4, don't you think it would be pertinent to make an equivalent video showing the actual current user interface?
The interface you are showing has little resemblance to the distribution version.
For instance, at 5:08, your video is showing a "Cut Conditions" panel, which, as far as I can tell, does not exists in 4.
Barbara,
For a lot of the videos using Version 3, we have remade the videos using Version 4 so that we have videos for people who are still using the old and the new! We're working on re-making more for the newest version!
TRW Alexis
What setting did you use. My cameo 4 does not cut my holes completely. It's very inconsistent
Are you using the auto blade? We've found it to be a bit finnicky. Here are our recommended cut specs for the Cameo: www.therhinestoneworld.com/colorspark-cut-settings We also use our TRW Clean Cut blades in the cb09 Graphtec Blade holder, which fits perfectly in the grey plastic housing that comes with your Cameo 4. Copy/paste this link to check out our video on how we're getting such clean cuts with our Cameo: ruclips.net/video/_Jdyvz0dT0U/видео.html Let us know if you have any other questions. We're here to help. -TRW Pilar
@@TheRhinestoneWorld I did purchase your graphtec blade and it did cut but the flock ripped. I will check out your settings. Thanks
Is it a new cutting mat per chance, and are you peeling the flock backing and placing it directly to the mat?
If the mat is new, I like to season the mat. This means pressing a clean lint free tee shirt to it a few times to take that grip down a notch.
If it's ripping while on the mat cutting, you may try to experiment with the cut settings starting from the guide that TRW Pilar has attached above.
Let us know if you're still having issues, we'll do our best to help!
-TRW Crystal
Hi. I have used Gem Tec (Xpres), but it is no longer produced. It was 0.5mm thick and very good to use. Could you advise me a stencil film to use for the application?
The only rhinestone template material we sell is the Magic Flock.
www.therhinestoneworld.com/Main-Category/Heat-Applied-Materials/Subcategory-1/Rhinestone-Production-Materials/Subcategory-2/Magic-Flock-Template-Material
TRW Alexis
Oh, thanks.
Great and helpful video, thank you
Thanks for watching, Nancy!
Is this the same process for applying it to fabric?
Yes everything's the same as to how to make the rhinestone design, you just wouldn't use the Bling Anything material. You would just directly press it to the shirt.
-TRW Mireya
What's the difference between a decal and a template?
Great tutorial
What size rhinestones are you using?
How can I order a custome rhinestone decal?
Brilliant!
Hello, Can something like this be created using the Cricut?
Maricela,
Yes you can use the Cricut to cut the Magic Flock.
The software may be the only limitation as you will need the ability to place SS sized stones.
TRW Casey
Thanks, what do you recommend me purchase for a beginner. I am excited to work on heat press and rhinestone shirts. I already have a heat press and off course the cricut. Seriously I'm thinking about the cameo just to work with rhinestones. idk please let me know so I can place a purchase asap..
Can this be done on a cricut?
Love it!!
Can I use the cricket air 2 to cut the template for rhinestones?
Mary Anne,
You should be able to use your Cricut, however we do tend to see some issues with Design Space bringing designs in (particularly rhinestone designs) and stretching them up which cuts the holes too large.
TRW Alexis
the sites are not working,i was trying to get some stuff on that online webs u provided
Thanks for your support!
Sorry we missed your comment!
We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have.
If you're still following - awesome! If not, we'd love to have you back!
We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways!
(To join, hit subscribe and during the live that opens a Live Chat button!)
Hope to see you there!
-TRW Crystal
Can you show how to do this with a Cricut Maker?
Unfortunately, we don't have a Cricut Maker, but we have made some videos using our Cricut Joy and Explore!
ruclips.net/video/NK_2TgDVnHA/видео.html&t
-TRW Bri
Thank you. I will view it.
What size rhinestones are best for beginners?
The most basic size used is the ss10 and you would need to get Hot-fix rhinestones, usually the most popular color is crystal. Hope this helps.
-TRW Bobbi
Hi there, what 2 types of Rhinestone paper did i need to complete this? 🤔
You need Magic Flock, Bling Anything Material, and Acrylic Rhinestone Transfer Tape. They're available on our website here:
www.therhinestoneworld.com/Bling-Anything-Decal-Material_p_2007.html
www.therhinestoneworld.com/Acrylic-Rhinestone-Hot-Fix-Transfer-Tape-12_p_1147.html
www.therhinestoneworld.com/Magic-Flock-by-the-Foot-12_p_2004.html
-TRW Bri
I truly appreciate your quick response. 👍🏼👍🏼
can you put it on a mug, tumblers or glass?
Hello,
Yes, you can put it on anything. Washing the mug might be a little bit of a concern. You can always hand wash the cups and glass.
TRW, Grant
I love your videos. I have business edition and it looks nothing like yours. Do I need to check for an upgrade?
rgoddess69 theirs is an older version, you probably already have the updated software.
Does thickness mean force on the cut settings for cameo 3 ??
The force says 33. I wanted to change thickness to 24
Passes is on 2 ? Is that ok. X
I cant seem to find the setting for the "rhinestone" on the silhoutte softeware 4.0.1052 version. i had the version you had. then it updated and it isnt any where to be found. please help me.
Summer,
Are you referring to the cut settings for rhinestone template material or the rhinestone panel to create rhinestone designs?
TRW Alexis
to make the images into rhinestone designs to be cut out... i guess both of what your talking about. very new just trying to see if i can even work with it before i buy any materials to try or make these types of things
AWESOME!!!
where can I get this machine pls
Can I make custom design in software
You can but it's very time consuming without the CorelDraw / Wizard. Still possible, just lengthy process. -TRW Crystal
Do i have to have a laptop? I just have my phone
Silhouette has an app! :-)
.
.
Sign up for emails, and stay up to date on Free Live Trainings and Sales here: lp.constantcontactpages.com/su/p1fq54w/TRWdeals
-TRW Crystal
when doing designs do they only work if they are vectored
Marilyn,
Yes, all designs need to be vectorized!
TRW Alexis
can you please do this for Cricut
Unfortunately, rhinestone designs are very finicky in Design Space. I'm not sure on an ETA for a tutorial. :(
-TRW Bri
@@TheRhinestoneWorld THANKS... IM TRYING TO FIGURE THIS OUT IM SO LOST
@@TheRhinestoneWorld SO IT COMES DOWN TO SOFTWEAR?
Would have been nice if you would have started from imported the photo and how to get to the rhinestone portion for people who are totally knew to the CAMEO like ME.. :) - I am lost. SO I need to fins a beginners video..
Thanks for the support!
Sorry we missed your comment!
We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have.
If you're still following - awesome! If not, we'd love to have you back!
We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways!
(To join, hit subscribe and during the live that opens a Live Chat button!)
Hope to see you there!
-TRW Crystal
Ive watched SEVERAL of your tutorials and you move and speak so quickly that I catch what you are doing......SLOOOOOOOOOOOOW down!
Hi Lainey, if you click the little gear in the corner, you can slow the video down. :)
Can you re-use the blue template?
Yes! Magic Flock templates are reusable. 😊
- TRW Haley
Is this rhinestone temple feature only available in DE?
Hello! While it is not available in the basic edition of Silhouette Studio, it is available in Designer and Business Edition. Let us know if you have any other questions. - TRW Richard
Can the Cameo 3 cut a 60" long windshield decal in 1pc?
Matterton,
I think the video below will help you out! :)
ruclips.net/video/J9l0bCKPV1E/видео.html
TRW Alexis
Wish we could get the decal material in the UK, there's nothing like that over here 👎🏻
Whats the name of that blade that make the holes?
Hi Dana, that is the Silhouette Cameo Autoblade. You can find it on our website here: www.therhinestoneworld.com/Silhouette-Cutter-Blades--Auto_p_17657.html
The blu paper, what is its name
That's our Magic Flock Rhinestone Template Material. I have linked it below for your convenience.
www.therhinestoneworld.com/Magic-Flock-by-the-Foot-12_p_2004.html
- TRW Haley
Cu ce program lucrezi? Cum se numește
Acest software este software-ul actualizat Business Edition de la Silhouette Studios. -TRW Pilar
@@TheRhinestoneWorld mulțumesc frumos
@@TheRhinestoneWorld va rog frumos. Daca se poate pe Facebook pe privat . Vă rog frumos .
Suntem disponibili la e-mail info@therhinestoneworld.com dacă aveți întrebări :-)
-TRW Crystal
Can you do a rhinestone on fabric video?
Sharon,
Are you wanting to watch a video on how to press rhinestones to a garment?
TRW Alexis
TheRhinestoneWorld I would like to see you go through the entire process like you did the rhinestone decals in this video. The technique was wonderful
And what kind?
The tape is called "Hot-Fix Transfer Tape". This is used to transfer the design off of the magic flock.
-TRW Abby
I need rhinestone software
Here is a link to the software we use!
www.therhinestoneworld.com/TRW-Design-Wizard-50-Pro-Bonus-3-Mini-Pack-Special_p_16349.html
-TRW Abby
👍👏👏
What is your website address
Here is our website!
www.therhinestoneworld.com/
-TRW Abby
Maybe some one can explain how to make the words smaller
Thanks for your support!
Sorry we missed your comment!
We have a team especially for social media comments now, and we wanted to reach out and say thank you for being part of the Crew, and that we're here for any questions you might have.
If you're still following - awesome! If not, we'd love to have you back!
We go live every Monday night, 8pmEST on our channel with free training and we still do giveaways!
(To join, hit subscribe and during the live that opens a Live Chat button!)
Hope to see you there!
-TRW Crystal
Hello, I cant find the rhinestone panel on the silhouette v4.
Can u help
Hey Leticia,
In the Silhouette software v4 you want to go to "Panels" at the top menu and then select the word "Rhinestone". Then you will see a panel on the right hand side! - TRW Aaron
TheRhinestoneWorld Great vid!
Stoooooop brushing the rhinestooooones!!! That was painful to watch!
That's really gave me bad anxiety
the RHINESTONE FEATURE IN THE NEW SILHOUETTE PROGRAM IS USELESS !!!
Cardell,
Are you having issues with it?
TRW Alexis
Talk too fast
You can click on the gear in the corner and slow down the video, or pause and rewind the video.
TRW Casey