HTML-код
- Опубликовано: 2 май 2020
- Today Melissa and I started staining and sealing the woodshed, I am very pleased with the Ready Seal we bought, I just have to figure out the best way to apply it. It works great on rough cut lumber off the mill and Im sure it would be a great stain sealant for fences, decks, sheds, or any wood that you want to protect from the elements.
#woodshed #readyseal
Affiliate Link For Ready Seal amzn.to/2VVSSZQ
Our Amazon Store (Includes Affiliate Links)
www.amazon.com/shop/influence...
Ariat Links!
Save 10% off your first order - bit.ly/2UfDXYg
Outdoors With The Morgans Favorites - bit.ly/3b6obFV
Our Address: Mike Morgan
P.O. Box 2140
Cranberry Twp. Pa 16066
CHECK OUT OUR NEW WEBSITE! www.outdoorswiththemorgans.com
Get Your LockNLube Here
bit.ly/2MDdtz5
Please Like Our FaceBook Page @outdoorswiththemorgans and follow on Instagram
email is outdoorswiththemorgans@gmail.com
Equipment that we use on the Property:
Woodmizer LX 150 Sawmill
Wallenstein FX 85 Skidding Winch
Wallenstein BX 52R Chipper
RK 24 Subcompact Tractor Loader, Backhoe & 54" Granite Grapple
RK 37 Compact Tractor With Loader and 72" Granite Grapple
RK 55 Compact Tractor With Loader
Polaris 900 Crew Side x Side
Wolfe Ridge Compact Commercial Log Splitter
Black Diamond 22 ton Log Splitter
RK by King Kutter 1.5 Ton Dump Trailer
Attachments:
Brush Hogs
Tiller
Box Blade
Land Plane
Disc
Post Hole Digger 
Хобби
The smile that left Melissa's face when you mentioned the DeWalt cordless sprayer was priceless! My wife was watching and said she knows exactly what she was feeling at that moment!
I had a guy visit my neighborhood while it was finishing up being built. He did my fence for $350. He had a few 5 gallon buckets and a huge auto detailing sponge. He soaked up the sponge and wiped each panel, then he had an asistant follow behind him with a 8" brush to back brush and avoid drips and runs. They worked quick and covered alot of area fast. The sponge really helped get in between the panels. I was really pleased with the outcome.
Mike I'm a retired fence builder and I would stain our fences with the same type of sprayer you purchased and it worked fine but with a different stain product. We would have a guy with a roller following the guy spraying. No matter how careful ,the product will run down the boards and our product would spray on a wider span than what your sprayer was pushing out of your spray tip.
I have been a residential painter for the past 16 years and I enjoy it very much. My advice for you is to get an airless sprayer, spray with a 213 tip and back roll all surfaces. It’s best to apply heavy and lay-off with a 1/2 roller nap. When the roller is soaked, you can unload it on a dry area off the woodshed that is next to be stained (so you won’t have double coated areas). I’m happy to answer any questions that arise. I’d offer my help but I’m in northern Michigan and that’s a hike for me for half a days work. Lol.
Melissa’s face expression at 15 minutes was priceless. Same thing my wife does when I say I need new toys, I mean tools. 😜
Melissa can say a Lot with a Simple expression , the channel wouldn't be the same with out her !
There's gotta be a special place in God's heart for the mouth breathers right?
Michael Rambo ,
I stained 200 Ft of 6 foot cedar fence with Ready Seal. Used a rented airless sprayer from Home Depot. No problems .
I always find you really have to pump those sprayers up to the max for them to work well 👍
I did a deck years ago with a Titan airless sprayer. Then while still wet, rolled it with a 3/4 Knapp roller. Results were fantastic.
Yes that was a Priceless moment watching Melissa's face at the 15-minute point they need sponsor from DeWalt can see that !!!!!!!!!!! Let's keep that smile on Melissa's face please
Mike I would use the roller. The look on Melissa,s face when you mentioned a Dewalt cordless sprayer was golden. For information Graco Ultra Cordless Spray Gun with DeWalt Battery 17N221
Cheers from Aus
I missed the face Melissa made had to go back and see it priceless
I second it on the roller and the look from Melissa. Lol.
THE look 15:03 lol
Mike - I don’t know ... maybe DeWalt makes a 20-volt sprayer,
Melissa - 😳 (thinking ... NO! Not another DeWalt tool?)
I saw that look also!
The stain looks great Mike, I'm not a professional but I've have stain a few privacy fences and for me the rollers seem to work the best. I have also found that the runnier the stain is the better it soaks in. Thanks for another great video. The girls did a great job on the mini cabin. Hello Hunter and girls.
Mike, I once painted a house for my cousin and he had an old cellar house he wanted painted also. The cellar house siding was old rough lumber that hadn't been painted in about 30 years. I tried using a brush and a roller and it was going to take a lot of paint and a lot of time to do a small building. I bought a Wagner power sprayer and it did a fantastic job. I still have it and love it, especially for rough cut lumber. It doesn't atomize the paint so bad that you get all that over spray like an air sprayer. You get a little but not too bad. They are well worth the cost. It will work on thin stain or a good thick latex.
You'll get better penetration with the roller & brush , it will take longer , but quality work always takes time ! love the colour too .
I’m going with roller and brush with my experience! I also think it looks better that way! Great job Mike, keep up the good work! Love from Northwest Indiana! 🙏🏻👏👍😉🇺🇸🇺🇸🇺🇸
Laying here in the hospital just waiting for a OWTM upload. YESSSSSS!
getting ready to stain the deck with this product, decided to go roller but wanted to watch from videos and came across this - love the Goldens!! I've been so stressed out and just seeing them made me feel so much better. I've had 5 in my lifetime and am dogless a little over a year now so I really needed this. ♥
I love it when the kids get to experience life and go to work
Looks like Tony Murphy beat me to the punch, Graco makes a cordless sprayer that uses the Dewalt batteries. Have used them before and a good investment for the amount of area you have on the sheds. Melissa's look when you said purchase a new tool was priceless - it's the same one my wife gives me every time I get a new tool, but I tell her when she quits adding to my to-do list I will stop buying tools to get them done. LOL - Stay safe.
Great product MIKE, just pump up the sprayer until it gets tight and keep it pumped up tight. This is stain and not water so it takes a lot of pressure to make it spray!! I know it is thin but not as thin as water. I installed a tire air valve in my tanks and use my air compressor to pressure up all my spray bottles. Works great!!! Try it.
Melissa's face when Mike says he's going to buy another Dewalt tool. 😆 LOL!
Hey M&M, good morning. Finally a question I can answer, what me and my crew (2 guys) have always done is use a 9" long nap roller cover on a full size frame with a four or six ft. pole ( adjustable is best ) working out of a five gallon bucket with a roller screen, apply as much as the wood wants and then back brush to work it in always keeping a wet edge. Hope that helps! Love the look that people are talking about!😂😂✌🏻️
Yeah, you need 30-40 pumps to begin with, then keep it pumped up to the max
You have to pump the pressure up.
Mike's gotta pump the crap out of that sprayer, and it stain might be too thick for the nozzle.
@@lostinmyspace4910add some diesel to it.
Always enjoy watching all of your endeavors. Love all of your way from your saw mills to your splitting wood.👍
Yes you are getting better at the selection. Yes buy the thin natural tones, the will soak in better. You may have to thin the stain,to spray. I thin mine when i do. That roller is doing a good job.
Get a sprayer , that one , is not enough , like others have said , you will be happy to have the sprayer !!!! 2nd coat will be a breeze . Hellol to Hunter !!!! Awesome outro !!!!!
Absolutely LOVE the Outro!
Finally got those girls out there to stain the cabin.
Your dividing and conquering with all there is to do.
And the shed looks great that color stain.
Great job yall
Yep…from central Texas, this is without a doubt the best outdoor stain and wood protection. I’ve used a brush, rag, sponge and they all work
Just is going to take time, with your kids home for the lock down seem like a good time for family bonding nothing like bonding with a paint brush, and many hands makes it a finished project. On to the next one.
spraying will work if you have the right sprayer. I mean painters use sprayers all the time. talk. to some of them. love your videos. you have really been cranking them out lately.
Looks good anxious to see what it looks like after it completely dries. 👍 God Bless Y’all each and everyone.❤️
Wow! Mike... when mentioned, DeWalt -- that wiped the smile off Melissa's face... funny!
I'm so glad I saw this.. because I saw this exact stain in the store and was considering it but had NO idea it was so dark. It looks nothing like the photo on the can. It's a beautiful color. I'm just so glad I know the accurate color when I go to decide what I want
Spraying is definitely the way to go. Go rent a sprayer electric sprayer, you can adjust the pressure to get the right penetration. Might have to have someone go behind you. We put two coats on our 30 x40 garage in about 7.5 hours. The rented sprayer will hold 5 gallons of stain. It lasted for 8 years before we had to do it again. The exterior is T111, don’t know if that would make a difference.
We used Ready Seal on our new deck, applied with a roller and a brush. You made the best pick with this product - Well done!
i agree with Tony, that look on Melissa face was priceless when talking about a Dewalt sprayer
The stain looks great Mike. I do think a power sprayer is worth the investment however and will make that job really go quickly. You have better things to do. Quote of the day!
There will be times in our life when we feel our story isn’t
being told and we will wonder if we are worthy. How did we get here and why me?
But in the end, it all comes down to the knowing who you are and putting
yourself out there. No two of us are alike. We are all born dreamers of one
type or another. We are either day dreamers that can’t see the road ahead…nothing
but a foggy mist or we are idealist who believe that nothing can stop us and
the path for as far as our romantic thoughts will take us will be our guide.
Every road lead to somewhere, it’s knowing when you have arrived that counts! ~
George Wheeler
Roller ! Mike , a little iced tea and some music and the job will get done in no time ,
I tried a pump sprayer many years ago on our deck. Ended up using brushes and a roller on a pole. Have stayed with this method since. Good luck.
Ready seal is the best , I mostly use an airless paint sprayer and immediately back brush an area like 6’x6’ On area’s where you don’t want over spray , I hand brush it on. I also lay down plastic sheeting for over spray.
Greetings from No VT - Mike, Great to see that you have adult supervision (Melissa) and have the big guy (Ty) keeping the crew motivated. He is such a lucky guy to have you all as family! I have had good luck with a 6" brush in one hand and a smooth nap roller in the other hand for staining flat surfaces. I have not had good luck with sprayers on vertical surfaces.
Hi Mike and Melissa,
Stain does look nice. I agree that a roller may be best to get the stain into the wood. Will take some time, but the woodshed will look great when finished. Stay safe.
Mike, I used the Ready Seal last year on a lamp post I built and covered with cedar. Nice product.
Mike and Melissa, the stain looks great!! I have a fence staining project coming up and will definitely consider the Ready Seal. A rented or purchased airless sprayer (Graco X7 - around $400.00) would be the fastest way to get it done but the spray tanks work fine for smaller jobs like this. Use a tip with a wide spray pattern and adjust (twist) the tip to fine tune the pattern and volume. Consider re-stirring and thinning the stain if it won't go through the nozzle. I've stained my fences multiple times with good result using a spray tank. Have to use the right spray tip, keep the pressure up and have someone chase you with a roller on a pole. It goes extremely fast. Your whole shed could be stained in an hour our so with a spray tank and a helper on a roller. If you decide to go with just a roller, put your stain in a 5 gallon bucket with a grate. Apply with a roller on a pole and chase drips with a brush. Much faster than a tray.
A deck boss brush on a pole is an excellent way of back brushing And it is fast. Deck boss can be acquired through the paint life company
That big smile went south quick when mike mentionsed a dewalt sprayer!..😂😂😂...too funny!!😆😆😆
Your color choice was beautiful “Natural Oak”
Would like to see it now since it has been a few years 😊
On the sprayer I believe the "Nays Have It." Melissa's look out yonder said a bunch load in the non verbal way. The roller really is best I think, you can work the stain into the wood as needs be. It looking good with what you have done with it Mike. Have at it!
Oh yes, As you said - A Staining Party with the kids - all with rollers and brushes as needed would work......family time[more of it].
Hi, Mike. I have used a larger, heavy-nap roller for putting color on old stucco and it works really good. It was a milk-wash stain, much the same consistency as your stain, I think, and it filled and covered really well. And, the plus side is that it was very conservative on the stain.
World of difference in sprayers. Like they say you get what you pay for. I have a commercial sprayer "Graco" with a 50 ft. hose and I stained our whole house 2500 sq. ft. 2 story plus 4 car garage in one day. My wife had all she could do just to keep opening new cans and swapping them out. It was a little pricey but it was very fast.
The roller looks like it’s doing great! The stain is beautiful!
Not enough hand pump for spray you have. When you see a stream, need more pumps
is that what it is? i will have to try again.
Bob Davis duh. Haha
I remember being at lowes asking the manager about outdoor stains and he was swearing up and down how thompsons is the best, dude next to me said its flat out garbage dont do it i'm telling you. manager was like i've never had a problem. dude was like it sucks! i went online, read the reviews and it had 1 star. found out about readyseal and it had 5 stars. cant wait to try it out. unfortunately nobody stocks it and it has to be ordered.
Hey guys, I’d recommend a Wagner Paint Sprayer, it has a lil 1 gallon tank. I used one to paint the inside of my garage. We did use a roller on it after but, great product.
Stain party! And, if I was planning a stain party, I would schedule it when I was at work. Just saying. Lol. The color looks great. 👍 👍
Used Ready Seal on a 110' of fencing built with 6' white cedar panels. Wife and I brushed it on each panel, front and back, before mounting them to the posts. The 5 gal size was just enough, and the results looked fantastic. I'll try a sprayer in a few years (hoping 4-5) when it needs another application, as it's pretty thin, and should spray fine.
if you spray the ready seal do
It with the least amount
Of
Pressure
Possible
As
It
Has been my experience that the particular
Are very thin and travel
A
Long way in the breeze. Also get a good stain tip for the ready seal. This is great stuff and I have several
Decks under my belt with it and have never been dissatisfied.
Stain looks great on the shed, not sure you’re ever going to get as good an application spraying vs rolling. And Melissa’s facial response to your DeWalt comment was priceless. I have seen that same look a hundred times. 😁. Can’t wait to see Ty get old enough to make the trip to BK with his Uncle Hunter!
Hey Hunter! ✋🏻👴🏻
I know absolutely nothing about applying stain but what you have done so far looks really good. Stay well, say hey to the family and yall HAVE A DAY 👍👍👍👍👍👍👍👍👍👍
The stream coming out of that pump sprayer reminded of a small squirt gun. I’d recommend shifting to either a roller (cheap, but time intensive) or an airless sprayer (much faster, but more costly) like the Wagner unit you mention, or step up and rent a commercial airless sprayer. Keep up the great work.
I know I say it every time but you guys have the best music ever
Well too late maybe for this time. But for in the future I highly recommend using a stain pad. They have them on Amazon shur-line 9 inch pad with handle $9.05. I got mine from Lowes. I stained my deck and fence this past fall. After having a deck for 30+ years and a wood fence for 17 years. And many hours staining and using different apllication methods. I can say these pads are the only way to go. Fast no mess no waste. Try them you will LOVE them! I promise. Rough wood will tear them fairly easy. I just learned to use less pressure on those boards that were rough. So worth the money.
Love the color Mike. Tried them all, brush, roller, sprayer, best luck I have ever had was a wide 5 inch natural bristle brush that allows the handle to unscrew and I screw in a broom handle so I can stand back and soak the stuff into the lumber. Any of the synthetic bristles I found to waste too much. Get a natural bristle brush and it worked great.
I love the Morgans. I used to use a sprayer like you tried and it worked just fine. It was a garden sprayer but had to keep it pumped up. Also it was an adjustable tip. Not a change out.
Roll and brush
. Applies well, and with good coverage.
Looks better rolling it or brushing it on IMO. I love the color and this was a great review. I just replaced all my deck boards and plan on using this same stain. Thanks for sharing!
We have a cedar log home and I have been using an airless sprayer (need a good one) to get the stain on the logs then work in with a stiff masonary brush. Have been through many brands over the years, time is the real test!!! Sansin has worked the best from my experience.
instead of the news and coffee in the morning ,it is outdoors with the morgans is so much better.
Hi outdoorgans You can get a airless sprayer with a roller attachment
I had good results with Devilbiss sprayer. Right air pressure forces it into the wood and all the small cracks.
I’ve stained my log home 3 times using an airless sprayer, then followed up with a brush in the other hand. Worked like a charm.
Agreed
Airless followed by a brush.
I have not read all the comments so maybe this has been mentioned already. Get a good pump up sprayer with a brass wand and nozzle. Pump it up until you cannot pump anymore. Keep the pressure high and back brush as you go. We have a log house and we stain it this way every 3 years. One person can stain the whole house with this method in two days using a man lift. Also wear latex gloves. A plastic painters suit is great also because it splashes a lot. I use a product called Woodguard. It has UV and insect protection.
When I did the T111 on my house I used a airless sprayer to apply the stain then fallowed up with a roller and brush for the corners
Houston we have a problem, the sprayer isn’t working as noted. Color looks great Mike. Keep on keeping on!!!! Have a day!!!
I have always used a roller and had great result. Have fun Mike.
Definitely a roller Mike, it will be worth it in the long run. I would keep teasing Melissa about the dewalt sprayer though 😉
I used that same sprayer for two years with a spray nozzle. Worked real well. Mike I can't believe you aren't an expert on staining because you are on everything else. Bet when you finish you will be!
I like using a roller. It pushes the product into the wood better. Use the pump sprayer for hard to reach places. Pump sprayer doesn’t have enough pressure though. Great color choice!
that stain looks great. cant wait to see the completed wood shed
I have stained a lot of decks and the best way I found is either a commercial sprayer or a brush. And if you are not going to use the sprayer that much you could rent one. But a good stain brush works great. Love your videos.
I drilled a hole and installed a tire valve so I can pressurize the sprayer with a compressor. I got over 300 feet of fence and my deck done very fast and easy
The ready seal is very nice to look at. That pump sprayer was disappointing only 20 bucks but Hunter could use that at BK. Ty was not consulted and he needs to be asked about the sprayer or roller. I think the roller is the better option but yeah get the chain gang out what are they doing anyway? Hello Hunter. Thank you for sharing the video. Ed
I have stained my white pine log cabin several times over the last 18 years. I tried an airless sprayer that pulls from the can of stain directly but I still had to back brush to work the stain in then I had to clean the sprayer which takes a while. No time saved at all. I now use only a 4" brush right out of the can. A Purdy staining brush works best. Cheaper brushes do not hold enough stain or clean up as well so they are too much work. I enjoy your channel and look forward to your next projects.
Good morning Morgan’s. Mike, you and I are roughly the same age, and as members of the fraternal order of JOAT’S ( Jack of all Trades), we have both learned that the fastest way usually is not the best way. In my experience especially with raw wood, getting the finish to penetrate will insure long term results. Brushing and rolling is the best way to get these long term results . Love the color.
I’ve done a lot of rough sawn pine staining, the best and easiest is to stain it before assembling the structure. The easiest application method. I found was the use of a painting pad that has a rough bristly surface that gives you the final brush like finish without brushing it in. I have also used a roller and sprayer for fast application but both require brushing out with a brush or pad to get even penetration.
As someone how has done many stainings of decks for customers, I found this product to be the best yet. I chose to use the roller method to be the best and use a medium-size brush to stain the sides of the boards to really make a nice finish. This product is oil-based and will beat all other products oil or water-based. I do work for many very off customers who expect perfection and long-lasting products. Spraying does not give as good of results and the overspray creates more work and clean up.
Spray is the way to go. Airless sprayer $450 at home depot, quick back roll and you are good. Covers all surfaces with pressure. I did our 24x36 one and a half story garage in hours.
Another great vid. I like the stain color and I have no advice as far as application. Today’s outro was very charming and very well done. Good job! 😎👍👏
You’ll love it. I’ve had great luck withReady Seal
Just had our new cedar fence stained. Fence guy sprayed 2/3 and his wife followed with a brush. One side we couldn't spray because neighbor has a truck and trailer right behind the fence. I ended up rolling stain myself and I think my side looks richer/deeper in color than the sprayed parts. Took a bit more time, but I'm happy with the outcome.
Yes the little fence roller
Thats funny, my wife does the "triple eye roll" as well when I mention a new tool . It's best to sneak them in the shop and get them dirty before you take them out then say " no honey... I got this as a gift a long time ago ".
I used a Wagner sprayer and it worked great. Ready seal is an oil based, self leveling, penetrating stain/sealer. You shouldn't have to have anyone follow you around. If you are going to use a roller, use the extension on it so you don't get splatter on you.
Mike, I’ve had good luck on fences with my HVLP sprayer. It has a turbine for pressure and it doesn’t require a lot of power so my small 1500W generator is easy to haul around and a gallon of gas will keep it running all day. I used this combination on my 4 board fencing that I have on 900’ of frontage. I loaned it to my brother for the same kind of job and it worked well for both of us. I’m a huge fan of HVLP. I use it for spray painting walls and applying finishes on furniture I make. One way to make spraying easier is to do while the lumber is laying flat - before nailing it up. You can apply your product thicker with almost no runs.
Mike, if you are going to stain the inside of the wood shed and the rafters, you are going to want to invest in a good sprayer and several paint brushes. The sprayer should spray hard enough for the stain to penetrate the wood.
The sprayer should have an adjustable nozzle, to make it more of a mist than a stream. I have used one with great results, a helper with something like a 5" or even a wider brush working it into the grain, even a good old white-wash brush will work. Good job you guys!
👍👍 Like the color,Mike. Keep'em coming M & M!! 👏😀✝⚜☮🇺🇸
I've used a hand pump sprayer, Wagner power sprayer, and roller/brush method for apply fence stain. The hand pump sprayer did not work that well. Using a lower price point Wagner sprayer, worked quite well and the stain lasted just as long as the roller/brush method. I used Olympic stain (thin type, not the semi-solid) in all of my applications. I got about 5 years out of the stain before it faded enough to need a pressure wash and re-stain.
I love the stain and I think rolling it on is the best way.
Love the color of the stain on the wood shed. 👍
Applied 20 gallons of stain last year and used a power sprayer followed by a roller. Works best with two people. Absolutely is the best way to go. Fastest and most complete coverage. Able to apply more gallons per minute than other methods.
Mike, I am not a professional painter, but a Wagner airless sprayer may be your best bet. I painted a metal building, 24x32 old tin, with a Wagner. Worked out well. Good coverage was easy to obtain.
I have also use an air sprayer to paint equipment. Used it all one summer, got good too.
The birds are going to love the soffit
Woodshed/Aviary
I agree with John. Also mice and Bees.
That's the best place for squirrels nesting I'm glad somebody else seen that
Just as soon as the metal roof is on they will be nesting .