Icom IC-2100H Basic Programming

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 98

  • @TheNuggetshooter
    @TheNuggetshooter 2 года назад +6

    I just purchased a 2300H, and I am glad I found this very well done and very helpful video. Thanks for taking the time to make it and post it.

    • @SevenFortyOne
      @SevenFortyOne  2 года назад +1

      Have fun with your new radio! Glad the video helped!

  • @ewhatcomcert5108
    @ewhatcomcert5108 4 года назад +5

    What a lifesaver. Forget the manual, this made it simple and easy to follow/do.

  • @pauljohnson7011
    @pauljohnson7011 2 года назад

    Thanks for helping this old 80 year old ham with his Icom IC220H that I purchased 12 years ago and could never figure out how to program it for repester use.

  • @markanderson5342
    @markanderson5342 Год назад +1

    This is a great video! I just got my IC-2300H yesterday and this ran through all the bells and whistles. Thanks!

    • @foundrysmith1
      @foundrysmith1 Год назад

      I also picked one up yesterday at a Ham Tailgate - great little unit! The tutorial here is very helpful

  • @jamesreyome6091
    @jamesreyome6091 3 месяца назад

    Brilliant in its simplicity. You got me out of despair and on the air. Thank you, thank you, thank you!

  • @johngoold1218
    @johngoold1218 6 лет назад +12

    I know this is an older video, but it HELPED me immensely in 2019!!! A gift that keeps on giving. Thank you very much.

  • @1StanTheMan1
    @1StanTheMan1 3 года назад +1

    I was just gifted a 2200h, my first radio. Thanks for the Programming and operations tips. I've been playing wiith it for two days - this helps a lot!

  • @ZAR797
    @ZAR797 4 года назад +4

    A great help with my 2200H. Very clear instructions, at last I was able to make sense of my radio

  • @anaixtar6793
    @anaixtar6793 Год назад

    I am a dinosaur when it comes to programming my radios---each model has its own twists and I really needed this video for my 2300--- and my sanity ---- it was excellent...thank you !

  • @alzeNL
    @alzeNL 4 года назад +3

    Really thanks for your video - as a foundation/entry level HAM in the uK it is my 'goto' video when i need to work my ICOM IC-2100H - i had my first contact thru my local repeater today, and your video was instrumental in helping me ! The docs are good, but your video will fortifys the learning, so thanks again ! M7ALU 73's

    • @SevenFortyOne
      @SevenFortyOne  4 года назад +1

      Thanks for your kind words and welcome to the hobby! Cheers and 73!

  • @techieg33k
    @techieg33k 6 лет назад

    I just got a used one from a Silent Key as my first 2m mobile since getting my Tech license. Thank you very much for this! I can work on programming mine like I want while my co-worker drives to a job site 2.5hrs away tomorrow.

  • @C100RXP
    @C100RXP 8 лет назад +1

    That was a great demonstration, especially for a "newbie". I will use this video to help program my IC-2100H. Thanks so much. KK4KPH

  • @tglenn3121
    @tglenn3121 3 года назад

    Thank you for the video. I have the IC-2000, but the steps were the same. I was confused about the + and - shift setup for the repeaters. Your video was very helpful.

  • @CLP2102
    @CLP2102 4 года назад +1

    I can not thank you enough for this video, outstanding job!!!!

    • @SevenFortyOne
      @SevenFortyOne  4 года назад +1

      I'm glad you found it helpful!

    • @CLP2102
      @CLP2102 4 года назад

      @@SevenFortyOne I bet I've watched it 7 times now, for any one else, this helps with the ic-2300h too

  • @smallenginedude71
    @smallenginedude71 8 лет назад +3

    THANK you!!! i was totally lost before this video. cheers!

  • @sniperjdp
    @sniperjdp 5 лет назад +1

    Thanks, much better than wading through the users manual !!

  • @barrybennecoff550
    @barrybennecoff550 5 лет назад +3

    This is an excellent video that covers all of the essentials for programming this transceiver. The manual is okay but not easy to follow.

  • @rafkend1422
    @rafkend1422 3 года назад

    Thank you for the instructive video. I just bought this radio[ actually the IC-2300H] and it arrived 2 days ago. It would have been very confusing to program it without your help, because the instruction sheet, yes a sheet, is no way near clear to do the job. I was OTA last night on simplex pileup and was able to reach 60 miles away with ease on 25 watts, The radio itself is just amazing like any other Icom. KJ7YSW

  • @myturbanizdurtee9159
    @myturbanizdurtee9159 6 лет назад +1

    Excellent Video & Presentation Sir, Very Informative And Helpful...Thank You Again...73zzz, From The North Woods Of Wisconsin...

  • @jefersonalmeida7885
    @jefersonalmeida7885 Месяц назад

    TKS pelo video instrução parabéns...
    Tenho uma dúvida, tem como apagar uma memoria gravada

  • @chichimus
    @chichimus 3 года назад

    Thanksfor the clear instructions. Just dug an IC-2100 out of storage but lost the manual.

  • @brianshanahan3878
    @brianshanahan3878 2 года назад

    Extremely helpful, thanks again sir!

  • @mikemiles3068
    @mikemiles3068 3 года назад

    Thanks good video, I just dug the old icon 2100H out of back room closet where it’s been for many years and I had forgot about. It still works but I forgot how to use it, this will help👍

  • @ChrisCavigioli2
    @ChrisCavigioli2 3 года назад

    Nice to also show some trickier operations such as moving a memory to a new channel number, erasing a memory channel, etc

  • @michaelgriffin2487
    @michaelgriffin2487 3 года назад

    Thanks for this video. We have 17 Emergency Operation Center (EOC) radio rooms that use this radio. When someone has questions about the radio I can refer them to this video.

  • @ths3900
    @ths3900 3 года назад

    Just what I need. Thank You

  • @buzzsah
    @buzzsah 6 лет назад

    Hi Rob, just bought another 2300. for the shop until the 9700 comes out. I did the mod yesterday and just hooked it up. Good vid as always.

    • @SevenFortyOne
      @SevenFortyOne  6 лет назад

      Cool...the icom mobiles are nice rigs! I have mine in my Chevy Tahoe...I run a Kenwood tm-281 in the Toyota I drive to work.

    • @buzzsah
      @buzzsah 6 лет назад

      I needed something in the shop until the ic9700 comes out and the 2300 in the van works great so why not.

  • @MrAquilasteve
    @MrAquilasteve 2 месяца назад

    Great Video, Thank You!

  • @michaelphillippe3041
    @michaelphillippe3041 3 года назад

    Why is it that when you are in vfo mode and turn on the tone, the tone icon disappears when you turn the tuning dial and you have to turn on the tone again?

  • @ANIMALMIXCHANNEL
    @ANIMALMIXCHANNEL 4 года назад +1

    Nice video

  • @lionelfrebourg8698
    @lionelfrebourg8698 6 лет назад

    Read the manuel about 20 times and got frustrated !! Thanks for your video on basic programming I finally learned something ! 73

  • @garyharper2992
    @garyharper2992 3 года назад

    This helped tremendously.

  • @PJLDaily
    @PJLDaily 4 года назад +1

    Over four years later, this is video is still going strong and has helped me very much. I appreciate it. Do you have any other videos of you talking on it or anyone else talking on it in your area?

    • @PJLDaily
      @PJLDaily 4 года назад

      I found it, thanks

  • @craumh
    @craumh Год назад

    Nice explanation

  • @RoadkillFXSTC
    @RoadkillFXSTC 7 лет назад

    Is there a quarter size back up memory battery inside? How old is this model? Radios are like computers and phones, always have to upgrade or get left out. 73's n3lhq

  • @tylerjett7726
    @tylerjett7726 5 лет назад

    Is there a way to set a negative offset? According to my spreadsheet one of our repeaters in the county transmits on a higher frequency than it receives and calls for an offset of -0.895.

    • @SevenFortyOne
      @SevenFortyOne  5 лет назад

      Yes, you can program a non-standard offset. I may have done a video on that...if not, it's probably in the manual but may be hard to follow

    • @tylerjett7726
      @tylerjett7726 5 лет назад

      @@SevenFortyOne Thanks for the quick reply. I can program a non standard offset but I can't seem to program a negative offset.

    • @SevenFortyOne
      @SevenFortyOne  5 лет назад

      @@tylerjett7726 I see...there may be an auto offset setting fighting you that may need to be turned off to get the opposite direction offset. I don't have the radio handy so I can't tell you what it might be called or how to disable it.

  • @Kd4stt.
    @Kd4stt. 3 года назад

    Thank you so much!

  • @terryleach5108
    @terryleach5108 8 лет назад +1

    Thanks for the excellent video! I bought a used IC-2100H at a hamfest last week but the manual is not really helpful. Your video made programming the radio a snap.
    Thanks and 73!
    Terry, WA5ZKP

  • @George_S.G
    @George_S.G 3 года назад

    what a great video, but question for you , how can i reset the radio to the factory? i will appreciate your help , thank you.

    • @George_S.G
      @George_S.G 3 года назад

      never mind i found your other video showing how to reset the radio , thank you and keep this amazing work that you are doing. 73

  • @ThomasSavoca
    @ThomasSavoca 5 лет назад

    Great resource. Thank you very much.

  • @ThomasSavoca
    @ThomasSavoca 5 лет назад +1

    Does anyone know of a video of this quality to show how to program the IC 2100h with Chirp?

  • @philipmenyweather3013
    @philipmenyweather3013 8 лет назад +2

    Thanks so much. Excellent tutorial for a dumbo like me..Philip de VK4NXZ Gympie, Australia.

  • @Rolen1015
    @Rolen1015 7 лет назад +1

    So I am trying to program my radio the alpha numeric will not come up when I hold the key down? The frequency is programed and it is memory mode, frustrated here!

    • @kg7wbw359
      @kg7wbw359 7 лет назад

      Since it has been a year when you wrote this, I hope that you found the solution. The basic manual that comes with the ICOM-2300H isn't very good in my opinion. If anyone else encounters the problem above that Brian is describing, check out the advanced manual on the ICOM website: www.icomamerica.com/en/downloads/DownloadDocument.aspx?Document=568

    • @mbadley658
      @mbadley658 5 лет назад

      Did you ever figure this out? I had to reset my radio and when I was trying to program the alpha numeric names for memory channels, I could not get the alpha/digit mode to come up. Holding down the ANM/Moni button only gives me 1 beep, not 2 like the manual says it should. (I have the expanded manual, and my radio USED to have alpha names on those memory channels, so I just don't get it)

    • @SevenFortyOne
      @SevenFortyOne  5 лет назад

      Try doing a factory reset on the radio . Maybe that will help?

  • @buddycraigg
    @buddycraigg 8 месяцев назад

    Thank you.

  • @alzeNL
    @alzeNL 4 года назад

    HIya, I am really struggling with getting DSTAR working on my Pistar - can you help with a video on how to program a IC-2100H for either use on a pistar, or maybe digital repeater ? Many thanks in advance, AL.ze

    • @SevenFortyOne
      @SevenFortyOne  4 года назад

      2100h is analog only. I don't have dstar or pistar or any of 5hat stuff anyway...sorry bud.

    • @alzeNL
      @alzeNL 3 года назад

      @@SevenFortyOne long time no see, just pulled my IC-2200H out again to join a local net. FYI - you can put a D-Star chip in IC-2200H - I've not been able to reach a repeater yet which has DSTAR on it, but I have setup a DSTAR hotspot which works great (also with my IC-705). Thanks agian for this video, it is good and glad to come back to it.

  • @sattambuggy
    @sattambuggy 4 года назад

    Hey, great efforts, i just bought icom 2300 i can control every thing from the mic it self but all keey in the device are dead except power button. Do you have any idea how to fix this .

    • @khalidnawaf1196
      @khalidnawaf1196 4 года назад

      You need to open the box and clean any dust or sand.

  • @howardjohnson5734
    @howardjohnson5734 7 лет назад

    very helpful ,i was given a used one now i need to set it up

  • @mdw159
    @mdw159 4 года назад

    to name frequency. "rotate knob".
    definitely helps. thanks. 😀

  • @harveydagpin3515
    @harveydagpin3515 4 года назад

    very helpful indeed...thank you!!

  • @hakemabutayeh4876
    @hakemabutayeh4876 4 года назад

    hi ... how can I online buy the "audio recever ic" and change it .pls help

    • @hakemabutayeh4876
      @hakemabutayeh4876 4 года назад

      or it is just programing coz all my frinds recive audio exept me i do normal reset not working

  • @cap10_r
    @cap10_r 4 года назад

    when i push ptt i see (hot) on the screen… whats the problem??
    icom 2300

  • @tandyallen8498
    @tandyallen8498 4 года назад

    I'm watching this video in an attempt to understand this radio which I recently inherited. Can anyone offer advice as to why the power button doesn't move at all. It appears flush with the face of the radio and there is no activity whatsoever when I press for several seconds. Thanks

    • @SevenFortyOne
      @SevenFortyOne  4 года назад

      Might be stuck. Mine only moves a little. If there is gunk in there it might be presenting it from moving

  • @jomarimercado9884
    @jomarimercado9884 4 года назад

    Thank you!

  • @hassum1985
    @hassum1985 5 лет назад

    Hi man. How to make the device send continuously

  • @raufdatucan6248
    @raufdatucan6248 4 года назад

    ic 23h it can turn to uhf? is it possible? and how?

  • @cholooliveros7646
    @cholooliveros7646 2 года назад

    Good day sir, Can you make a basic programing for icom 208h? Thanks.

    • @SevenFortyOne
      @SevenFortyOne  2 года назад +1

      I'm afraid I don't own one of those radios

    • @cholooliveros7646
      @cholooliveros7646 2 года назад

      Oh thank you sir, appreciate your reply I'm also a ham radio operator here in the Philippines. DW3OUH is my call sign. 73!

  • @searchingshropshire
    @searchingshropshire 2 года назад

    Mine won’t let me enter the letters

  • @davidsauerwrx7460
    @davidsauerwrx7460 4 года назад

    Great help, thanks! WROX

  • @dilshadbabu2660
    @dilshadbabu2660 3 года назад

    How to saving of memory channel

  • @macmodmaruhom3780
    @macmodmaruhom3780 4 года назад

    My gadget 2200 appeared d4670 instead of 14690 paano mka resume

  • @garyharper2992
    @garyharper2992 4 года назад

    Very helpful. The included instructions from ICOM are not that great.

  • @baraiyaparesh5330
    @baraiyaparesh5330 7 лет назад +1

    give me Any wireless frecvency no..plzzzz

  • @BikePractice
    @BikePractice 4 года назад

    without this vid, my used purchase 2100h would have been a mini boat anchor.

  • @RicardoBugiganga
    @RicardoBugiganga 8 лет назад +1

    TKS 73 !
    PU2RBH

  • @leopoldozapanta641
    @leopoldozapanta641 3 года назад

    ICOM IC-2200H PRICE

  • @peterbrown1968
    @peterbrown1968 5 лет назад

    das it got ssb LSB and USB on it

    • @SevenFortyOne
      @SevenFortyOne  5 лет назад

      No, only fm

    • @peterbrown1968
      @peterbrown1968 5 лет назад

      @@SevenFortyOne ok thank im just looking for a new CB with SSB. you have a good day from sydney australia is 12am time to good to bed

  • @محمدالمالكي-ظ1ر
    @محمدالمالكي-ظ1ر 6 лет назад +1

    ياليت أحد يترجمه😢

  • @obsidian1853
    @obsidian1853 6 лет назад

    .thank a lot..4i9HTL