i just rebuilt this same boat using all aluminum so if you want to check that video out as well the link is below, thank you to everybody that has watched this video and thank you to all the nice comments! ruclips.net/video/ImPu54JK8TE/видео.html
Did you remove all this work you did and start over? Was something wrong with this original design or did you just want to improve? Great job on this conversion.
I cant remember the last time I watched a video over 20 minutes... I didn’t skip a second of this one. Your attention to detail is commendable! Strong work!
@@williameddysayers4596 >~>... I could buy all that for about 100$ at Lowe’s.. it won’t be the birch wood stuff but it’s not like pine/oak is that bad.
I can really appreciate the time you took to do everything right. The little things and the others that people will never see. Just doing it right from the ground up. It’s refreshing to see it. Excellent job, I really enjoyed watching it.
implying working 2x4s and plywood is hard. this is a great simple build, it's a tiller as well. This is easy stuff most people can do, don't discourage others just because it looks "hard".
I'm in the process of doing a center console conversion on my SeaArk 1860 that I inherited from my Dad. I thought I knew what I was going to do with it until I watched your video! You have inspired and motivated me to go all out! I'm building it for my wife, so she doesn't ask too many questions about what I'm buying! (He,He!)
I basically did the same thing to an old 1976 Tom Boy fiberglass boat. I gutted it to the bare fiberglass hull. And started from their and built it all up to a like new boat. Same with the 76 Johnson 40 HP engine and trailer as well. Everything totally rebuilt. A lot of work, but you get to rebuild like you want it. Thumbs Up to you and I hope you have many many years of fishing enjoyment with it!
That was perfect! You showed me almost EVERYTHING that was important! (and only “almost” just to give you some wiggle room for perfect) Sooo many useful tidbits and really well edited timelapse! You rock! Thanks!!
There’s two types of guys. You have the ones that go buy a bass boat to fish, and you got those that like to build stuff, and fish. Awesome build and amazing time lapse!
This is nuts man. Absolutely beautiful boat. Lots of work but well worth it. Inspired me to build/convert my own. Your videos will be a HUGE reference point so thank you!
I was impressed by it all. Every minute. But what really impressed me was that you knew to waterproof everything you did. Every wire, board, and piece you put in that boat! It's not only good looking, it is gonna last. I would have wanted a bigger motor, but I don't know your budget or how you fish. Consider me blown away! Impressed does not even begin to cover it!
Man, that was an awesome video, I recently just finished up my build, from start to finish it took me about 6-7 months from tear down to finished product. Awesome build man. My only critique is adding a backer to your seat and shorten your bilge discharge. Awesome job bro.
Awesome job. But just one question. Why red. I would have gone with a more natural color. Light blue or green. Maybe brown. Just my personal preference but like I said. Awesome. I want one 🙂
This dude has to be a dad, that carpet/wrapping skills would be epic on christmas.......makes it look so easy then I consider trying and realize I don't have the tools or more importantly the skills to do this. Well done eitherway
After watching all the videos on this build, first trip out, and costs... I have to say SICK ASS CONGRATS! Awesome job !! Really awesome to see youngsters building, and putting in the effort to pass on to the next generation. The passion you have definitely shows! Congrats again! Great vids!
Great build...great video....amazing skill and effort. My only small recommendation........Show the finished product for another minute or so at the end so we can see all angles and compartments open/closed etc. Kudos man! Edit: I see you have another full video of that. Great work dude!
Ive seen em all and this is my favorite build. NICE JOB. the knobs are the best value / function. color is the best. Engine size is perfect. plenty of lights for leaving after dark. plenty of storage. a really nice build and value.
Haha! I built this same boat 30 years ago! I even painted it red and had grey carpet. You did a much better job than I, but it was a great fishing boat. Brings back memories of just how much it costs to build your own bass boat. I even live in Texas!
Awesome awesome build but I had a buddy with a similar problem with a 20 horse. I’m wondering if that little eight Merc was able to push all that weight up on plane?
Thank you for the video. you hit me in the heart. boats and homemade products, what could be more beautiful. dude you are just amazing, you have golden hands! I wish you all the best, may your fantasy not run out
I went to BassPro to buy a Bass-boat, but the $38,000.00 tag scared me, so, I bought the exact set up you got. I just got home from Lowe’s. I bought everything as you suggested, when I got to the register at Lowe’s to pay for the lumber, I noticed my lumber bill was higher than the 24 ft bass-boat I wanted to buy. It’s a joke, mocking the lumber prices in my state. Thank you for the video, it’s awesome. Enjoy it, buddy.
HEAT SHRINK ON ALL WIRES! i didnt see a bildge pump or livewell pumps. Lubed all electrical connections. Woodwork and Electrical work. Massive thumbs up! Good job young man! You made yourself a fine Bass Boat!
Um did you watch the build. This can hold as many people as you can fit on it. Unless you think a 2x4 supported by the aluminum boat itself can’t hold a thousand pounds.
yeah did the same thing except i made it worse by adding a tower for bow fishing bad mistake had to add weight to the floor of the boat to keep from flipping over ...so stupid it works for what i want but you have to be careful and its definitely a one person boat.
@tonylwright yeah i just depends on how high you make the cast deck on a small boat. I have a decked 12 foot gregor and its perfect but also framed and didnt take the deck to the top
It’s awesome... A lot better than taking shots at people who have worked their asses off to get what they have. Plus, if he could “go out and buy what he wanted”, he would have went out and bought a 10-15k dollar BassTracker, because that’s essentially what he just built.
You’re either too young or you’re just lazy man that’s all it comes down to not saying get a job and blow your money you gotta save you make a dollar you can play with 30 cents the way I look at it (no not exactly what I said but all I’m saying is spend responsibly) jobs are out there man you just got to look and learn fast and don’t whine about the work.... cause you just might be able to buy “whatever you want”
Oh man, I shouldn't have watched that! My wife is going to turn mad me disappearing again for weeks in the workshop! 🤣 I got almost the same dinghy and thought of a bit of an improvement....you have so much an eye for the detail. Me as a German I absolutely admire this kind of Kraftsmanship. And it didn't cost you $30k...Great respect!
I could do this too but that looks like it cost quite a bit to do. I think a bigger Jon boat is probably going to be safer. I bet it paid for itself from the 2 million views it got.
This is the best detailed Jon boat customization video on RUclips. Just got mine yesterday and I’m about to transform mine just this way! Thank god I invested into tools since I was 16, I’m 32 now and I will definitely get mine rolling! Dope ass video bruh! Kuddos homie! Subscribed !
I've actually helped put carpet in boats before. The corners are not that hard to do. But, using multi purpose glue. It and water don't mix. Even when it dries. Contact cement works better.
I helped my dad do this to our boat back around 2002-2005. We did things slightly different but definitely the same concept. It was a cool project, this video brought back some good memories. Nice work 👌🏼
HAHA....I got 2/3 of the way through the vid and thought "if I spent half that time at work making extra $$ I could've bought a new boat!" Great vid and at least you have something you built yourself!
That was amazing dude!! I can barely run a claw hammer. You are a very talented guy. I wished you lived near me! I’m just in awe at how well you done this build! Thanks for sharing!!
the durability of Jon boats are amazing, i had purchase 12ft for cheap/with trailer and sealed it on the cheap with bathroom caulk. enjoyed seeing your work! color's a bit unconventional but ggreat job!
You sir have sparked for me an almost year long hunt for a johnboat to do the same exact thing.. I have no idea how to do electronics and my carpentry is limited but this is a feat I must tackle!
Final outcome wow you knocked this out of the park. I would imagine the wife was like wow you made this out that ugly boat good job honey. When someone that does not have 10 grand to buy a Bass boat but knows his way with some tools awesome.
Dude, I found this video by chance. Once you started building I couldn't quit watching. That boat looks killer. I'll be sending my jon boat to you for an overhaul. Lol
I don’t own a boat but still watched the entire video. I think it came out beautiful . My hat is off to you young man. I had time to make ten of these but wasted it foolishly instead. 🎶Yesterday, when I was young .......🎶
Nothing says safety like skills saws and sandals. Just think after you lose one or two toes you can cut a crank bait out of the ones that you have left lol
i just rebuilt this same boat using all aluminum so if you want to check that video out as well the link is below, thank you to everybody that has watched this video and thank you to all the nice comments!
ruclips.net/video/ImPu54JK8TE/видео.html
I have a 97 colman crawdad 11' poly plastic. I wonder if i can do something like this with it lol
Do u rebuild boats for a living I need a boat made into a bass boat
Did you remove all this work you did and start over? Was something wrong with this original design or did you just want to improve? Great job on this conversion.
Do you have a build guide? I've wanted to do this same thing for a while.
@@mfbassfishing2952 you looking to sell?
Sitting on the shitter at 3am and Im mesmerized watching this. Excellent job- Tight lines...
Same lol
You to, lol
Me Too.... But it's 7:30pm Not 3am....You Tube is the new New Readers Digest!!!!
TMI...
Lol, I’m not alone!
"No baby, it's just a jon boat, it won't be expensive at all"
@@jacobanacleto u crazy. Well over that
@@sprintfishing9007 I just realized he got a motor a trolley and a garmin my bad
I would love to know where you are getting new Jon boats for 200.00
@@AdamRyanA Nevermind man my first grance was just the carpeted ply wood
Until you go buy the motor for it.
Probably the longest 43 minute videos ive ever watched and didnt skip a second. You beasted this build bro!
Thank you for watching bro!! 🤙🏼
Couldn’t agree more. Could watch this guy anytime. Clean thoroughly detailed. Awesome
i was gonna say the same thing. he was so clean and very detailed. you know what you’re doing 🤙🏻
I second that comment!!! I watched every minute!!! That's a pretty build, dude.
I cant remember the last time I watched a video over 20 minutes... I didn’t skip a second of this one. Your attention to detail is commendable! Strong work!
can't lie I've watched every second of this video and its just motivated me to start my own build thanks for the footage man. it was a great video
Did you ever build out a Jon boat? I'm thinking of doing the same, late to the party😂
@@Vikingsmoke yeah I did and then I ended up selling it lol worse mistake I've made
@@La_Delilah_Racing Sorry to hear that, if you don't mind me asking what happened?
This isnt just a boat! This is a Master piece. Best of luck man!
10k worth of lumber alone
How much you have in it. It nice. Y you put a 8 horse on and not a 15 to a 25? But the boat look good.
@@williameddysayers4596 >~>... I could buy all that for about 100$ at Lowe’s.. it won’t be the birch wood stuff but it’s not like pine/oak is that bad.
@@williameddysayers4596 good job
I can really appreciate the time you took to do everything right. The little things and the others that people will never see. Just doing it right from the ground up. It’s refreshing to see it. Excellent job, I really enjoyed watching it.
nice, we converted a 20 foot speedboat for our bass boat, and adding a new 2020 evinrude 150 hrs motor just made things better
WOW! What a beautiful job you did. Very well planned, and detailed. Awesome job man! Be proud of it, not many can do a quarter of you did.
Thanks man! I’m pretty proud of how it turned out 🤙🏼
I agree
@@AdamRyanA hey awesome job man could you plz tell me how much the whole thing costed
@@birdman3389 There’s a full video on how much it costed
Me: I got a stimulus check
RUclips algorithm: you might like this
Me: well damn it.
This video should come with a disclaimer for all the average builders out there that think they can do this. That was a work of art bro.
implying working 2x4s and plywood is hard. this is a great simple build, it's a tiller as well. This is easy stuff most people can do, don't discourage others just because it looks "hard".
@@candleflame4355 great post you’re build video. I was simply building the young man up.
I think am average builder can pull this off. Very clean and simple build!
This boat is beautiful
The disclaimer should mention that the boat will sink at the first sign of waves/rough water. Adding that much weight to a jon boat is unsafe
I'm in the process of doing a center console conversion on my SeaArk 1860 that I inherited from my Dad.
I thought I knew what I was going to do with it until I watched your video!
You have inspired and motivated me to go all out!
I'm building it for my wife, so she doesn't ask too many questions about what I'm buying! (He,He!)
I’m glad I could inspire you! 🤙
Ther was such a human element added when you filmed the painting od the boat on a skateboard! I Love it! Thanks for sharing this with us!
I basically did the same thing to an old 1976 Tom Boy fiberglass boat. I gutted it to the bare fiberglass hull. And started from their and built it all up to a like new boat. Same with the 76 Johnson 40 HP engine and trailer as well. Everything totally rebuilt. A lot of work, but you get to rebuild like you want it. Thumbs Up to you and I hope you have many many years of fishing enjoyment with it!
Like many who comment how much effort went into the build, hats off to your edit, lots of effort on that too!
That was perfect! You showed me almost EVERYTHING that was important! (and only “almost” just to give you some wiggle room for perfect) Sooo many useful tidbits and really well edited timelapse! You rock! Thanks!!
I’m glad I could help out
@@AdamRyanA help me out?😂 absolute understatement! Think I may go on further and use strap hinges in addition to strap pulls/latches. Thanks again
This is probably the coolest thing I’ve ever seen done on one. Not a SINGLE step missed. Did everything 100% the right and correct way. Very cool
With the way wood prices are you could’ve bought two brand new bass boats for the cost of wood put into this lol 😂 but it’s a really cool build
Not a chance it would have to be used and it would be like a 1990 bass boat to get a new 2021 bass boats your looking at 50 grand
My thoughts exactly!
@@einyount1818 you’re not the best at sniffing out sarcasm lol.
@@alexgustavson2909 I’m still dying laughing at this.
Even if that were true which it’s not, it would never beat the the process of doing it yourself, especially to the level that this guy did.
There’s two types of guys. You have the ones that go buy a bass boat to fish, and you got those that like to build stuff, and fish. Awesome build and amazing time lapse!
He probably sells them
Mad skills, it’s amazing what young people can go when they put there mind to it. Congratulations amazing work.
Thank you David! 🤙🏼
@@AdamRyanA 1
This man deserves a hand shake. Iv never seen nobody put this much talent and skill into building a flat bottom. Well done man!
This is nuts man. Absolutely beautiful boat. Lots of work but well worth it. Inspired me to build/convert my own. Your videos will be a HUGE reference point so thank you!
I’m glad I could help! 🤙🏼
I was impressed by it all. Every minute. But what really impressed me was that you knew to waterproof everything you did. Every wire, board, and piece you put in that boat! It's not only good looking, it is gonna last. I would have wanted a bigger motor, but I don't know your budget or how you fish. Consider me blown away! Impressed does not even begin to cover it!
Solid build bro. I like that. I cant believe i just watched every min of that lol I even paused when I got interrupted 🤣🤣🤣
Thanks for watching, I’m glad you enjoyed it! 🤙🏼
Damn fine work brother looks awesome👍🏻
Man, that was an awesome video, I recently just finished up my build, from start to finish it took me about 6-7 months from tear down to finished product. Awesome build man. My only critique is adding a backer to your seat and shorten your bilge discharge. Awesome job bro.
Thanks man! I’m glad you enjoyed it! And hope you enjoy your build as well! 🤙🏼
Logical and more accurate than many I've seen. I've been between a cheap boat and a jon boat and I think this swayed me. Thanks.
it's obvious that this is not your first time around a boat. Very good job. Seeing the Texas license plate makes it BETTER.
I shouldnt have watched this now i wanna customize my lil boat
Lol do it!! It’s fun!
Right lol I agree because this turned out badass best video I’ve seen ever when it comes to redoing a boat this was just amazing
Awesome job. But just one question. Why red. I would have gone with a more natural color. Light blue or green. Maybe brown. Just my personal preference but like I said. Awesome. I want one 🙂
Same
I customized mine lil boat not to long ago
This dude has to be a dad, that carpet/wrapping skills would be epic on christmas.......makes it look so easy then I consider trying and realize I don't have the tools or more importantly the skills to do this. Well done eitherway
This is just amazing fella, love the detail and attention you put into this rig
Man i think i have seen your video at least 30/40 times.. when i need to relax, i watch it..
That’s awesome to hear, thank you for watching Marco 🤙
This is freaking awesome dude! Your giving me the itch to get out and start working on my 14ft Jon Boat too!!
After watching all the videos on this build, first trip out, and costs... I have to say SICK ASS CONGRATS! Awesome job !! Really awesome to see youngsters building, and putting in the effort to pass on to the next generation. The passion you have definitely shows! Congrats again! Great vids!
Great build...great video....amazing skill and effort. My only small recommendation........Show the finished product for another minute or so at the end so we can see all angles and compartments open/closed etc. Kudos man!
Edit: I see you have another full video of that. Great work dude!
Thanks man!! And yeah I was really worried about how long the video was already lol
Ive seen em all and this is my favorite build. NICE JOB. the knobs are the best value / function. color is the best. Engine size is perfect. plenty of lights for leaving after dark. plenty of storage. a really nice build and value.
Thank you man! 🤙
you've inspired me to build my own in the same way thanks
Ayyye that’s awesome!! I hope it’s a stress free build for you 🤙🏼
Haha! I built this same boat 30 years ago! I even painted it red and had grey carpet. You did a much better job than I, but it was a great fishing boat. Brings back memories of just how much it costs to build your own bass boat. I even live in Texas!
Man if I had these skills I could take over the fishing world lol lol
Amazing skill and craftsmanship. I’m pretty handy, but this blows me away. Not a single detail missed.
Awesome awesome build but I had a buddy with a similar problem with a 20 horse. I’m wondering if that little eight Merc was able to push all that weight up on plane?
When I saw you flip that knot hole to the finished side of the deck!!!! Now I can't un see it! Fantastic build none the less!
I'm impressed
Thank you!
Initially I thought, what crap but I went on to watch entire video any I should say just amazing. Hats off buddy.
Sweet!
Thank you for the video. you hit me in the heart. boats and homemade products, what could be more beautiful. dude you are just amazing, you have golden hands! I wish you all the best, may your fantasy not run out
thank you man!! 🤙🏼
I have a 78K Skeeter in the driveway watching this thinking how cool is this
Thank you! And I wish I had a skeeter 🤙🏼
I went to BassPro to buy a Bass-boat, but the $38,000.00 tag scared me, so, I bought the exact set up you got. I just got home from Lowe’s. I bought everything as you suggested, when I got to the register at Lowe’s to pay for the lumber, I noticed my lumber bill was higher than the 24 ft bass-boat I wanted to buy.
It’s a joke, mocking the lumber prices in my state.
Thank you for the video, it’s awesome. Enjoy it, buddy.
This playlist tho 🔥
I did my skiff like this but instead of carpet. I just painted a few coats then splattered a different color over top, excellent work my friend!
Did just the paint get to hot to walk on?
Awesome Job!!! and the music just made the video worth watching more...love chillstep.. excellent combo...👌👌
Thank you Warner! 🤙🏼
Wow what a transformation. I watched every second of the video without skipping for the first time on YT. Nice job bro.
Nice vid idk how you have the patience to do that
Lol it wasn’t to bad, but some days I didn’t lol
Excellent attention to detail. You’re a true master craftsman. I couldn’t stop watching.
Surprised that little thing still floated with all that extra weight
No way to know if it actually floats until we see a video of it on the water......Lol
Same lol but she floats like a dream, and there is a lot of videos on my channel of her floating
HEAT SHRINK ON ALL WIRES! i didnt see a bildge pump or livewell pumps. Lubed all electrical connections. Woodwork and Electrical work. Massive thumbs up! Good job young man! You made yourself a fine Bass Boat!
Only problem is these boats are designed to hold a certain weight. And that weight just went way down. So now only one person can be on it
Um did you watch the build. This can hold as many people as you can fit on it. Unless you think a 2x4 supported by the aluminum boat itself can’t hold a thousand pounds.
@@157dixon the way he framed it alone is gunna be way too top heavy and unstable being that high to the top of the boat.
yeah did the same thing except i made it worse by adding a tower for bow fishing bad mistake had to add weight to the floor of the boat to keep from flipping over ...so stupid it works for what i want but you have to be careful and its definitely a one person boat.
@tonylwright yeah i just depends on how high you make the cast deck on a small boat. I have a decked 12 foot gregor and its perfect but also framed and didnt take the deck to the top
I gotta lose weight anyways so just call it motivation
flipflops and power saws: a winning combination, especially cutting wood so close to the ground
Wonder how it feels to be able to go out and buy all the stuff you want
You should try it. A good work ethic, saving, and patience will do it.
I dont have the money and I only have a v modified jon boat not flat bottom
You sound like a lazy, jealous bitch.
It’s awesome... A lot better than taking shots at people who have worked their asses off to get what they have. Plus, if he could “go out and buy what he wanted”, he would have went out and bought a 10-15k dollar BassTracker, because that’s essentially what he just built.
You’re either too young or you’re just lazy man that’s all it comes down to not saying get a job and blow your money you gotta save you make a dollar you can play with 30 cents the way I look at it (no not exactly what I said but all I’m saying is spend responsibly) jobs are out there man you just got to look and learn fast and don’t whine about the work.... cause you just might be able to buy “whatever you want”
Oh man, I shouldn't have watched that! My wife is going to turn mad me disappearing again for weeks in the workshop! 🤣
I got almost the same dinghy and thought of a bit of an improvement....you have so much an eye for the detail. Me as a German I absolutely admire this kind of Kraftsmanship.
And it didn't cost you $30k...Great respect!
That looks like a Bass Tracker Classic, but in a jon boat.
Ayyye I’ll take the compliment lol
Noticed you live in West Texas too. I live in Abilene.
Dang there is skill sets and then there is SKILL Set! This guy is freaking awesome, could start his own business building custom Fishing rigs!!!
*Looks good even in daylight **enjoyable.fishing** recommend it was exactly what it was described to be , works awesome , overall happy with product*
I could do this too but that looks like it cost quite a bit to do. I think a bigger Jon boat is probably going to be safer. I bet it paid for itself from the 2 million views it got.
Yeah I would definitely go bigger if you can and yeah more then double, just don’t tell anyone I said that lol
This is the best detailed Jon boat customization video on RUclips. Just got mine yesterday and I’m about to transform mine just this way! Thank god I invested into tools since I was 16, I’m 32 now and I will definitely get mine rolling! Dope ass video bruh! Kuddos homie! Subscribed !
If you don’t mind telling how much money was invested. I love this idea
also very curious for the guesstimate of total build time and total cost
I'm guessing somewhere around 5-6k
@@nathanv995 hey theirs another video he did that breaks down the cost really interesting it was over 5 grand
Alot of extra weight in the boat
Believe me. Whatever he spent on the materials was nothing when he got to the motor. BOAT= BET ON ANOTHER THOUSAND
By far the best build Jon boat on RUclips.
Would like to see how he did them Corners so nice on the carpet does anyone know
I have a Jon boat build playlist in my channel, I pretty much filmed and talked about everything I did in the videos
It’s in the video
I've actually helped put carpet in boats before. The corners are not that hard to do. But, using multi purpose glue. It and water don't mix. Even when it dries. Contact cement works better.
Yes couldn’t be said any better lol.
@@AdamRyanA 333Zez42
Dayum!!! Man, I'm a FAN!! Right now you're at #1 for most satisfying video of the year! #Awesome
This is just proof that you can do anything with a skilsaw
I helped my dad do this to our boat back around 2002-2005. We did things slightly different but definitely the same concept. It was a cool project, this video brought back some good memories. Nice work 👌🏼
My 16ft mod-v from Lowe came with a big deck from factory so I’m lucky I didn’t have to do this, turned out amazing though
Thank you Anden 🤙🏼
The drilling of the corners to make nice cuts with the jigsaw was very informative and ingenuous.
Do you ever regret not just paying a few more thousand and getting that bass Tracker from Bass Pro Shops the one for 9000 what's a 40 horse on it
Oh yeah lol if I knew I was gonna spend that much I would of got a used bass boat
@@AdamRyanA Great job!!
Awesome jon
HAHA....I got 2/3 of the way through the vid and thought "if I spent half that time at work making extra $$ I could've bought a new boat!" Great vid and at least you have something you built yourself!
That was worth every minute to watch. Wow.
wonder how many calories this guy eats a day to keep moving that fast
To many!! 😂
That was amazing dude!! I can barely run a claw hammer. You are a very talented guy. I wished you lived near me! I’m just in awe at how well you done this build! Thanks for sharing!!
Thank you Jeff
Watching this at .25 speed is like watching the sped up footage in real time. I'M GETTING THE FULL BUILD.
THIS AIN'T PIMPM MY RIDE IT'S PIMP MY JON BOAT! LOVE THE VIDEO MAN AWESOME! YOU SAVED ABOUT 10,000 DOLLARS.
I don’t think Ranger is as quality as this. Such a fantastic job.
Your Video helps me a lot to build my own fishing boat!!!! Thank you very much and greatings from Germany... 👍👊😉
the durability of Jon boats are amazing, i had purchase 12ft for cheap/with trailer and sealed it on the cheap with bathroom caulk. enjoyed seeing your work! color's a bit unconventional but ggreat job!
You sir have sparked for me an almost year long hunt for a johnboat to do the same exact thing.. I have no idea how to do electronics and my carpentry is limited but this is a feat I must tackle!
Solid build and it looks awesome. You have skills, you may have invented a new segment in the fishing industry.
Thanks man!! 🤙🏼
Wow what craftsmanship, ingenuity and attention to detail! Great job and great video!!
Thank you Dave! 🤙🏼
Not even sure what other content you have on your channel but 30 minutes into this one and I'm a sub now... super impressed!!!
I’m telling you rihth now I’m halfway through and I’m so impressed I can’t even begin to explain
Final outcome wow you knocked this out of the park. I would imagine the wife was like wow you made this out that ugly boat good job honey. When someone that does not have 10 grand to buy a Bass boat but knows his way with some tools awesome.
this went a lot more in depth than i was expecting and you killed it bro!
Thanks bro! 🤙🏼
Dude, I found this video by chance. Once you started building I couldn't quit watching. That boat looks killer. I'll be sending my jon boat to you for an overhaul. Lol
I don’t own a boat but still watched the entire video. I think it came out beautiful . My hat is off to you young man. I had time to make ten of these but wasted it foolishly instead.
🎶Yesterday, when I was young .......🎶
aint that the truth....nice to see young man doing something constructive
Loved the video! Amazing finish to a bland Jon boat! I love the deck system too looked great
You snapped on this project.... I was a proud journeyman watching this... so neat 🥲 👏🏾👏🏾👏🏾 👏🏾
You're the king of improvised tools
Bravo man! No corners cut here Great job an accomplishment to be proud of!
Nothing says safety like skills saws and sandals. Just think after you lose one or two toes you can cut a crank bait out of the ones that you have left lol
That’s not a bad idea
Amazing build. The transition at 4:23 was clean.
Wow you're not kidding, I thought, the first time watching it, that he had someone helping him. I didn't realize it was just a dope transition.
gave a like for that 4:22 transition, smooth AF.
WOW...well done....that was an amazing 42 minutes and worth every minute