I'm a seasoned fpv flyer and driver. And for a beginner video, you did a great job. You stated the good of everything, and bad of everything. And also did test runs, which I thought was awesome
one important thing kevin !! when you buy a video transmitter you have to make sure that it can reach or match the same channels and band or raceband as the receiver (channel range) exemple , immersion rc transmitter (the tramp) does not work with all receivers , be careful with the raceband transmitters (immersion rc and akk )are some of the best and well known fpv transmitters they can go from 24 , 32, 48 and 72 channels and from 25 milliwatts to 1.5 watts , personally i use immersion rc transmitter at 600 milliwatts in my long range planes and my tarot 960mm filming drone and akk transmitter in some rc trucks , and never had an issue ! thanks kevin for the video
This is the video I needed because I want to to put cameras in all my 5 scale cars but didn't know what I would need to do it. Thanks kev this video is spot on. Thanks for info
Here's the thing I'm going to be most interested in Kevin: when I have FPV'd some RC cars and trucks and then try to drive them fast, racing against my brothers and stuff, the image is always so bouncy and jittery and violent that it's really hard to see where the heck you're going and avoid obstacles and actually enjoy it. So what I've been trying to figure out is the simplest and lowest cost way to create a smooth stable FPV image on RC cars. THAT would be a little project and video I'd love to see you do!
rubber band gimbal/microphone shock mount looking thing inside the car for the fpv camera will make it smoother, you just have to find the right tension in the bands
@@stephendeben That will absorb shock but little damping, which means it really isn't going to help much...still going to be bouncy as heck in the image and really hard to actually enjoy the FPV driving experience.
That will absorb shock but little damping, which means it really isn't going to help much...still going to be bouncy as heck in the image and really hard to actually enjoy the FPV driving experience.
You can increase the range of those Eachine TX03 and TX05 cameras from 25mw to 50, 100 and 200mw by pressing the button on the transmitter part. I took my drone out to 600 meters and didn't lose signal. Also highly recommend Eachine EV800D box goggles for about 100 dollars. They have "diversity" meaning two recieving antennas, one short range the other long working in tandem to create static free image. You can record footage to sim card with them too. Had mine nine months used daily without issue.
Dude you are freaking awesome I just came from learning how to fly drones in FPV and all that and I recently just got into RC cars and I'm getting a traxis X Max But I've been watching your videos so far and you have covered everything that I like to see. From upgrading your RC cars too now making an FPV RC cars which I didn't know was a thing until I started looking around and I'm surprised to see that some people are kinda into it. I came from drones because they're too hard to fly LOL and RC cars are way cooler but thanks for making all these videos you are freaking awesome love from the United states, Washington state. You are already my favorite RC you tuber, like the FPV drone world I did not know the RC world, let alone the RC FPV world existed I'm glad I'm here and I'm glad I found you. subscribed on all devices.
Kev, that Eachine ROTG you use with your phone works even better with a Windows 10 laptop although the better the laptop spec the better it runs. All you need to do is connect it to the laptop with usb cable and then open the camera app that comes with windows 10, once the camera app is open select the second camera and then your ready to go flying/driving.
Love your content Kevin! I want to get into this but I wonder if the tech is any better since this is an older video. Would love to see an update maybe on your second channel? Cheers!
What a coincidence!!! I was searching for fpv info. this evening and I found nothing, then I remembered in the live stream fpv with pat and as I was searching the livestream, the notification for this vid poped up😁😃. Your the best kev💯 keep it up! Tks for everything
I am getting ready to get a head tracked x-maxx 8s going. I got head tracking working on crossfire and regular spektrum systems. I am going to use a DJI air unit and goggle system with it with a transparent body kit so I can see through the entire body.
I did it I checked out your Basher School thank you by the way and i pulled the trigger I got a Traxxas Slash 2wd :) so much appreciation to you Kevin thank you
@Kevin Talbot, I am going an odd direction. I need to make a slow moving vehicle (very small... 3" - 8" long), and a LOW LIGHT camera with MACRO capabilities. I'm NOT making a fast drone or vehicle nor am I taking pictures of vast landscapes. Smaller goal - ability to navigate on the ground and to see in low light. Suggestions on the camera side? I think I can figure the rest out.... Thanks!
I have a question on the camera connection. Most of simple cameras use 3.3-5v source. The author uses 1s battery for that, which is nice. I was just curious, if I connect the battery directly to the camera, it will draw the juice until the battery dies, right? I suppose this approach has no low voltage protection and I have to manually time-measure the camera usage and change batteries before they go low. Is it gonna damage the battery if I forget and leave it on for long? So I decided to hook up to a receiver channel. it gives 6v and I used a step-down circuit to get 5v. So this way it takes current from the main battery, which is protected by ESC.
Nice dude I am in the uk just fixing my runaway traxxas t maxx 2.5 haha keep up the videos and please take the slash and udr out more because I am interested in buying one or the other?!?!
Thanks bro that helped alot. I had an old drone laying around that had a decent camera on it and i just ripped that off the drone and on to my arrma truck and it worked
Can you cut off the female jst connector then put a male on and plug it into the same thing you would plug lights or a servo into? You know what I mean? Edit: I have the indoor deadbolt crawler (it’s the exact same as the small yellow car you have) help pls
Kev is finally going down the FPV Rabbit hole!!! Don't forget about the split cameras like the runcam split mini, caddx turtle v2 and tarsier that also do onboard HD DVR :)
i watched many videos trying to learn how to set up an fpv set up and I must say you nailed it, you made it easy to follow and gave lots of examples thanks for sharing this 👍👍👍
Good video to help the noobs Kevin. Thank you. But I think you missed the best value and most accessible type of display for those who are starting our. "Box goggles" are the way to go. Slam dunk with either of these: Eachine EV800D or Eachine VR D2 Pro. You can get them usually between $75 to $85, sometimes on a special sale as cheap as $50 or $60. Nice big display. Comfortable for most people. That's what I've been flying with for over two and a half years and I still don't feel a strong need to upgrade.
Hey great video! Quick question, when running the camera off the cars own power and not a separate battery, does the camera just need 5v to work? So long as it's limited to that it should run just fine? Could it be run off the servo motor?
Will the cameras that come built into the drone and their transmission works on the 5.8 frequency also connect to the monitor? Or do you need another camera to add to the drone for it to work?
Great video kev really liked learning your view of FPV. 10 people thumbs down 👎🏻 lol they must suck hahah very funny. By the way I clicked thumbs up 👍🏻. Great video again kev. See you soon for a live. 😊😊😊😊😊
Hows it going kevin this was a perfect video everything I really need to know in one video thank you very hope you have a fairly decent weekend with this rain enjoy
I've had a couple of cameras all-in-one connected works fine then pop glow up so much smoke from such a little device so I stopped looked around everything I found was American so hopefully I'll be able to figure this out
for all the things in the full fpv kit costs around £70 including postage, (to my area) this is also with 5 battery's but you can buy one and save money
What equipment do y’all recommend for a crawler/rock bouncer, will never go past 10mph, nothing too far, maybe 100ft at the most, most likely less. Looking for something with good quality and not gonna break the bank
I recommend that stuff for a crawler because for things like short course and truggy it wouldn’t be much use dependent on the frame rate and the speed because ur gonna crash straight away
Where r u based? I've never used those eachine goggles but they are known to have a narrow field of view. I've got a pair of fatsharks you can try. They feel like you are front row of a cinema when you look through them.
Love the video. I had to laugh at your reciever (transmitter) mix-up. I laugh because I'm an amateur radio operator and i do it once in awhile. Can't wait to see your new videos with fpv.
You should do a experiment and put the camera on the x max and see if kid will steal it and when they are getting redy to steal it hit the gas and run away
Hi Kevin and thanks for an other great vid! I am very interested in fpv and rc's, I think it could be a lot of fun! I will put one into my Summit if I can get all the components here in Sweden, but I belive the Summit is a great truck for fpv. What do you think? All the best / Peter
I'm a seasoned fpv flyer and driver. And for a beginner video, you did a great job. You stated the good of everything, and bad of everything. And also did test runs, which I thought was awesome
As an FPV pilot for 10 years, you did an excellent job, Kevin. You're good at everything RC and Monster Jam trucks, lol.
one important thing kevin !! when you buy a video transmitter you have to make sure that it can reach or match the same channels and band or raceband as the receiver (channel range) exemple , immersion rc transmitter (the tramp) does not work with all receivers , be careful with the raceband transmitters (immersion rc and akk )are some of the best and well known fpv transmitters they can go from 24 , 32, 48 and 72 channels and from 25 milliwatts to 1.5 watts , personally i use immersion rc transmitter at 600 milliwatts in my long range planes and my tarot 960mm filming drone and akk transmitter in some rc trucks , and never had an issue ! thanks kevin for the video
This is the video I needed because I want to to put cameras in all my 5 scale cars but didn't know what I would need to do it. Thanks kev this video is spot on. Thanks for info
Here's the thing I'm going to be most interested in Kevin: when I have FPV'd some RC cars and trucks and then try to drive them fast, racing against my brothers and stuff, the image is always so bouncy and jittery and violent that it's really hard to see where the heck you're going and avoid obstacles and actually enjoy it. So what I've been trying to figure out is the simplest and lowest cost way to create a smooth stable FPV image on RC cars. THAT would be a little project and video I'd love to see you do!
rubber band gimbal/microphone shock mount looking thing inside the car for the fpv camera will make it smoother, you just have to find the right tension in the bands
Sponge as shockabsorber.
@@stephendeben That will absorb shock but little damping, which means it really isn't going to help much...still going to be bouncy as heck in the image and really hard to actually enjoy the FPV driving experience.
That will absorb shock but little damping, which means it really isn't going to help much...still going to be bouncy as heck in the image and really hard to actually enjoy the FPV driving experience.
@@SteveGergetz i saw some articles telling that proper shock absorber can help for fpv.
I FPV everything I can. its a totally different perspective on the world.
Yus!
Well I'm to broke to afford any of these because I'm a kid : (
@@sessna We're all kids once.
@@Burn377 yed
@@Burn377 plus the project is gonna cost 62.48 dollars plus tax
You can increase the range of those Eachine TX03 and TX05 cameras from 25mw to 50, 100 and 200mw by pressing the button on the transmitter part. I took my drone out to 600 meters and didn't lose signal. Also highly recommend Eachine EV800D box goggles for about 100 dollars. They have "diversity" meaning two recieving antennas, one short range the other long working in tandem to create static free image. You can record footage to sim card with them too. Had mine nine months used daily without issue.
thanks dude
Dude you are freaking awesome I just came from learning how to fly drones in FPV and all that and I recently just got into RC cars and I'm getting a traxis X Max But I've been watching your videos so far and you have covered everything that I like to see. From upgrading your RC cars too now making an FPV RC cars which I didn't know was a thing until I started looking around and I'm surprised to see that some people are kinda into it. I came from drones because they're too hard to fly LOL and RC cars are way cooler but thanks for making all these videos you are freaking awesome love from the United states, Washington state. You are already my favorite RC you tuber, like the FPV drone world I did not know the RC world, let alone the RC FPV world existed I'm glad I'm here and I'm glad I found you. subscribed on all devices.
Kev, that Eachine ROTG you use with your phone works even better with a Windows 10 laptop although the better the laptop spec the better it runs. All you need to do is connect it to the laptop with usb cable and then open the camera app that comes with windows 10, once the camera app is open select the second camera and then your ready to go flying/driving.
sounds epic. I just tried how do I select camera 2?
Dude has a lamborguinni but not new shoes... respect 🍺
This channel just makes me smile. Thanks Kevin 👍👍👍
Yeah boyyy new video from kevin who else was waiting for this
Dude. You REALLY are the BEST!
Thanks Kev, always wanted to get into “ FPV “, great video....👍👍👍👍👍👍👍👍👍👍👍👍👍
Love your content Kevin! I want to get into this but I wonder if the tech is any better since this is an older video. Would love to see an update maybe on your second channel? Cheers!
What a coincidence!!! I was searching for fpv info. this evening and I found nothing, then I remembered in the live stream fpv with pat and as I was searching the livestream, the notification for this vid poped up😁😃. Your the best kev💯 keep it up! Tks for everything
If you have a good spec laptop then you should try the ROTG receiver that plugs into your phone as it also works with windows 10 laptop.
Can you plug the phone thing into the TV!!?
DN The Smile Maker probably if you get a usb to hdmi adapter I'm not totally sure though
@@JustASohc should work?!
J. A I would love to see him do that!
No because you need an app on the phone to view the feed
@@oc_fpv3280 nice content boy
Thank You!
Now I Finally Understand How The Basic Components Work!
I've always thought it was too complicated.
Thanks Again!
No problemo. I'm a noob myself but hope I know enough to get someone started
You nailed it. Great video.
what battery do i need to power the fpv camera? I see you plugging the cameras into a little battery, but can't see the specs of the battery?
Love watching some Kevin when I get home from school😌
I am getting ready to get a head tracked x-maxx 8s going. I got head tracking working on crossfire and regular spektrum systems. I am going to use a DJI air unit and goggle system with it with a transparent body kit so I can see through the entire body.
I did it I checked out your Basher School thank you by the way and i pulled the trigger I got a Traxxas Slash 2wd :) so much appreciation to you Kevin thank you
Put it on the Xmaxx and make it Long ranged 👍 nice video well explained
how to longrange an fpv camera and my remote?
I've seen someone selling a gimbal mount for the camera that has head tracking with the goggles. Looks like great fun
Have you done a follow up video with the camera on a pan-and-tilt gimbal and a head-tracker on the FPV goggles?
Even after 4 years this video is super helpful. Great vid 👍
Just did fpv tank. Wanted to buy a car to fpv.
I been building fpv drones for like 3yrs now so wanted to do ground stuff.
3W transmitter and elrs24
@Kevin Talbot, I am going an odd direction. I need to make a slow moving vehicle (very small... 3" - 8" long), and a LOW LIGHT camera with MACRO capabilities. I'm NOT making a fast drone or vehicle nor am I taking pictures of vast landscapes. Smaller goal - ability to navigate on the ground and to see in low light. Suggestions on the camera side? I think I can figure the rest out.... Thanks!
I have a question on the camera connection. Most of simple cameras use 3.3-5v source. The author uses 1s battery for that, which is nice. I was just curious, if I connect the battery directly to the camera, it will draw the juice until the battery dies, right? I suppose this approach has no low voltage protection and I have to manually time-measure the camera usage and change batteries before they go low. Is it gonna damage the battery if I forget and leave it on for long?
So I decided to hook up to a receiver channel. it gives 6v and I used a step-down circuit to get 5v. So this way it takes current from the main battery, which is protected by ESC.
Nice dude I am in the uk just fixing my runaway traxxas t maxx 2.5 haha keep up the videos and please take the slash and udr out more because I am interested in buying one or the other?!?!
Creative guy buy a slash 4x4. It won’t disappoint. I’ve had one for 2 years and never let me down!
FUNNY FUDGE MAN ok just been looking around the slash 4x4s and the udrs for bashing and mudding really cheers
Creative guy no problem. It’s great for bashing!
I’ve been using FPV for a while and I have to say your video was very informative for the beginners to the world of FPV.
beneath the eachine gogles are focal adjusters for you eye sight
Thanks bro that helped alot. I had an old drone laying around that had a decent camera on it and i just ripped that off the drone and on to my arrma truck and it worked
best video for FPV starters, too good. keep up the good work
Can you cut off the female jst connector then put a male on and plug it into the same thing you would plug lights or a servo into? You know what I mean? Edit: I have the indoor deadbolt crawler (it’s the exact same as the small yellow car you have) help pls
Hey keV my favourite is back with another awesome video!!!
I am familiar with FPV but I enjoyed your video a lot,,, THANK YOU
Good job explaining all this Kev! Been looking forward to seeing you get into FPV! Can't wait to see what you do with it, sky's the limit really.
Kev is finally going down the FPV Rabbit hole!!! Don't forget about the split cameras like the runcam split mini, caddx turtle v2 and tarsier that also do onboard HD DVR :)
Im trying to put a cam on the volcano truck i got my son for Christmas. I have been flying drones and im new to the hobby so im just playing
How do you extend the range of the car signal and basically all the other signals
i watched many videos trying to learn how to set up an fpv set up and I must say you nailed it, you made it easy to follow and gave lots of examples thanks for sharing this 👍👍👍
Good video to help the noobs Kevin. Thank you. But I think you missed the best value and most accessible type of display for those who are starting our. "Box goggles" are the way to go. Slam dunk with either of these: Eachine EV800D or Eachine VR D2 Pro. You can get them usually between $75 to $85, sometimes on a special sale as cheap as $50 or $60. Nice big display. Comfortable for most people. That's what I've been flying with for over two and a half years and I still don't feel a strong need to upgrade.
18:26 "I really should buy some new shoes" haha, same for me I've got holes in the end of my work boots. Just bought this setup instead 😂
@Chiron Keller I did dude. Was a joke okay calm down
@Chiron Keller you would be correct man :)
Hey great video! Quick question, when running the camera off the cars own power and not a separate battery, does the camera just need 5v to work? So long as it's limited to that it should run just fine? Could it be run off the servo motor?
Very good demonstration and video, Mr. Talbot.
Fpv pilot here. It's awesome!
is there any other app that i can use other than go fpv....... the app only supports on older version ??
I'm wondering if it would work for rc drag racing and speed runs. Will it keep up with the 100mph runs?
do you need a cooling fan for them
Sir how about the transmitter of the RC Car? Do you need to upgrade that too?
Thank you for this! It answered questions I’ve had about FPV! Cheers!
super clear video! Love it. What app would you recommend for newer android OS? GO FPV isnt supported anymore and everything else seems rather fishy
dji should send you a dji digital fpv setup to review to get fpv into rc cars.
Will the cameras that come built into the drone and their transmission works on the 5.8 frequency also connect to the monitor? Or do you need another camera to add to the drone for it to work?
What if you want a camera in the back as well
Also seen it helps if powered of a battery to have a power filter apparently helps.
hi kevin . what are the eachine ev800dm fpv goggles like ? or eachine goggles in general like ? thanks !
Thanks for the tips! I placed my order be flying fpv soon! And trucks and boats too!
Hi
I know its been awhile, but one of the camera is waterproof? Or do you know some waterproof FPV set?
You should put some clear acrylic covering the lens on the homemade one so you don’t get dirt or damage it if (when) you crash
You can always learn from people 😊 thanks for video
i was the youngest in FPV Drone Racing in Ontario Canada at 1 Point. i was 11.
Lies
I'm completely confused. Link to cam 2 and 3 please? And transmitter?
How do I record! 14:30 answered my question.. It's easy to record using the samsung or iphone type receiver together w/app
Great video kev really liked learning your view of FPV. 10 people thumbs down 👎🏻 lol they must suck hahah very funny. By the way I clicked thumbs up 👍🏻. Great video again kev. See you soon for a live. 😊😊😊😊😊
Kev would you review the proline brute body for the xmaxx
So where can I plug in on the traxxas revo 3.3
Is there a camera/transmitter that will work at 900 meters range ?
Hows it going kevin this was a perfect video everything I really need to know in one video thank you very hope you have a fairly decent weekend with this rain enjoy
I've had a couple of cameras all-in-one connected works fine then pop glow up so much smoke from such a little device so I stopped looked around everything I found was American so hopefully I'll be able to figure this out
Have you seen the Epson moverio BT-300 fpv glasses, they let you see the video from the camera and your surroundings.
I love your energy and enthusiasm :D
The video I've been looking for, thanks
Nice. But whats the range on those?
Love your vids kev!
for all the things in the full fpv kit costs around £70 including postage, (to my area) this is also with 5 battery's but you can buy one and save money
I’m curious, could this be done with gas powered rc cars?
What equipment do y’all recommend for a crawler/rock bouncer, will never go past 10mph, nothing too far, maybe 100ft at the most, most likely less. Looking for something with good quality and not gonna break the bank
I have to put a second lens (took arms off a pair of glasses) and wedged them in the headset.
I recommend that stuff for a crawler because for things like short course and truggy it wouldn’t be much use dependent on the frame rate and the speed because ur gonna crash straight away
Nice lambo man 😅, whats the second build?
Where r u based? I've never used those eachine goggles but they are known to have a narrow field of view. I've got a pair of fatsharks you can try. They feel like you are front row of a cinema when you look through them.
Great video mate.
Awesome video Kev for the FPV Goggles try and adjusting your pids and see if you can see clearly.
Great info on starter gear. Thanks Kevin
Love the video. I had to laugh at your reciever (transmitter) mix-up. I laugh because I'm an amateur radio operator and i do it once in awhile. Can't wait to see your new videos with fpv.
You should do a experiment and put the camera on the x max and see if kid will steal it and when they are getting redy to steal it hit the gas and run away
How did you make the camera box
Thank you sir... I am complete new of fpv camera...i biy to banggood 2 camera but mo receiver...😂
Hi Kevin and thanks for an other great vid!
I am very interested in fpv and rc's, I think it could be a lot of fun!
I will put one into my Summit if I can get all the components here in Sweden, but I belive the Summit is a great truck for fpv.
What do you think?
All the best
/ Peter
Can I connect the fpv to my phone??
How about on an x-maxx?🤔🤔
Make it kev please
😍😍😍😎😎🤭😎😎😎😘😘😘😋😊🥰🥰🤩😚
Hey @Kevin Talbot what RC websites do you use
Nice mate. We are really gonna have to get some goggles on you and have a fly along with a race/freestyle quad on 6s😉👍
One of the links isn't working
I was waiting for u to upload a new awesome yt clips like what u do best 😀💯
What Allen tips did you use for the drills you have?
How do you charge the monitor
220 WOOHOO FROM TEXAS 😎😎😎