Anycubic Photon Workshop Beginner Guide 2
HTML-код
- Опубликовано: 25 авг 2024
- This video will show you how to use the Anycubic Photon workshop. We'll walk you through the process of adding support, and teach some useful tips. 😊
And if you have any doubts about the video or if you have anything you would like to know, please comment below! 😁
Beginner Guide 1: • How to Start Using Pho...
===
🛒Buy Printer
Official Web: www.anycubic.com/
🔍 Support channel (Product installation and maintenance)
/ @anycubicsupport917
👨 Social Page
Facebook: / anycubic3dprinter
Instagram: / anycubicofficial
🔍 Group
Anycubic Official User Group
/ anycubic
👷♂️ After-Sale Service
Request a new ticket: support.anycub...
#anycubic #photonworkshop #3dprint
If you have any doubts about the video or if you have anything you would like to know, please comment below! 😁
Photon Workshop Beginner Guide 1: ruclips.net/video/NqPuJ9hckSM/видео.html
( Beginner Guide 1 :You can learn how to set the printing parameter for your model )
I have a file with a long internal cylinder, open on both sides. How ever during printing seems to fill with resin and come out solid. Any tips to printing long thin hollow sections?
Sir, do you mean that during the printing process, the resin flowing out of the hole will cure on the surface of the model? For your model, our suggestion is that when you punch holes on both sides of the cylinder, the height of the two holes should be as different as possible (one high and one low) 😊
HELP!! got my photon mono x week ago, been struggling with it. The test file work perfect but i download files from online stl and use the photon workshop to slice it and convert it to pwmx. I load it to the flash drive, flash drive displays correct print i wan to print. hit print, begins to print..hours later should 50, 60, 70% etc but i look at the plate and it has built nothing. I am using the any cubic resin. please help?? what am i doing wrong.
@@norbertofernandez4077 did you solve your problem?
@@3d_printer_go_brrrrr they read the manual.
As a beginner of 3d printing thank you for the tutorial!
A great tutorial for beginners. Please more :)
thank you! new to this and it helped a lot
OMG this is the tutorial i needed!
I got lucky and caught a photon mono 4k... I wont be able to open until christmas so this is a great study guide before aquiring it!
Got mine today. I’ve printed with FDM but never SLA. Seems like a little learning curve!
This is exactly what I was looking for, thank you! 👍
Could you update the videos for new version 3.3.2 its very different from this old one
Why is the contact shape greyed out and will not let me change
What about the problem with the lack of anti aliasing on the mono x. When will you issue an updated firmware. Or do I just get an Elegoo Saturn???
Hi !, what is the wave lenght range of the LCD screen of M3 Premium? thanks a lot!
Great and informative video for beginners. I'm new to this program and have had a hard time navigating it. What was in this video helped a lot with some of the issues I have had. Any more information you have about this program would be appreciated
Yes, thank you, we are happy to shoot more tutorials about it. In fact, we have uploaded "Beginner's Guide 1" and we have explained how to set the printing parameters, including exposure time, bottom layer number, etc. You can take a look. And if you still have any questions, you can feel free to let us know, I will discuss the new video content with the engineer. 😊
Beginner Guide 1: ruclips.net/video/NqPuJ9hckSM/видео.html
@anycubic3d
Can you use with Chromebook, Linux???
When I open some of the options, the window is larger than my screen size and i don't have the option to close or resize it. How do I make these new windows smaller and closable?
Workshop V2.2.19, can't change Contact Shape (Sphere always), the button is grey and inactive (Photon D2), please advise)
i'm encountering the same issue on this version as well
How do you import a config or "conf" file? In the older version I had with the original photon I could import a conf file that saved my settings for a particular resin. I can't find where to do that
I'm new to 3D, with the Photon Mono 4K, I tried using Lychee and got constant print failures. I sliced in Workshop and finally, got my first print. I don't know enough yet to configure Lychee, if it's can be compatible but the Workshop software constantly crashes, especially when trying to add holes. Thus, it's the first thing I add and I SAVE OFTEN. it could be my old laptop too :)
Can you save support settings
Does this version have the mono 2 added to it? I think I'll be rolling back to one of these versions before that new slicer update to 3.0 it's nothing like this! I see light and medium supports are used in this print why can you do this in the latest update? Oh please change it back, or make a new video like this for the updated slicer to show how to work it as its one of the most complicated I've used!
Why does this seem much more than the new 3.10 update? That menu at the side is very missed for supports and can I not use light med supports in a print do they all have to me either light of medium?
How can I save the model in PWMO format? To be able to print on the PHOTON MONO. Because my PHOTON does not print STL for me.
Been trying to figure that out to.
idk how.
Is this version of the workshop released yet? The one I downloaded doesn't have options you are using.
New to resin printing-when i save file to jump drive it states correct file type(for photon zero) but does not show on photon lcd screen
Where is the save to "scene" in the latest V3.1.3?
At 0:34 at this video shows failures. I have the samee failures. With whitch software can I repair it? For example Blender? And what is the name of this funktion in the menu?
Hello dear, thanks for your feedback. You can try to use Lychee, which equipped with the built-in repair features: )
I dont have the same user interface.
I have a problem with Photon Workshop, every model I open in the app appears as if half is outside the print area, half green and half black, and the figure is fully centered.
where can i download it? from github i can't find the download page
What am I missing? My Photon software looks NOTHING like the one used in this video series. I just bought my printer last week.
www.anycubic.com/pages/firmware-software
Is there a way to reduce the size of polygons when importing step files? I find it impossible to print lenses.
Support is irrelevant for me, I design my models to be fine without support, or I make the support in the CAD program.
Hello Team Anycubic, when will you offer a resin that is water-soluble and odorless?
Hi dear, Anycubic Water-Wash Resin+ is no alcohol needed with slight odora:www.anycubic.com/collections/water-wash-resin/products/anycubic-water-wash-resin
My photon workshop (with Photon Mono), does not show hollow fill at all, its not there in the automatic fill menu...
Ran into the same issue. I was wondering if you were able to find a solution? Thanks in advance.
Hello. I'v got this message and don't know how to fix this. It says " Max verts generated application will reject generating meshs for better use". What do i have to do ?
Hi, sir, for technical problems, you can ask our engineers. you can set up an after-sales order here, and the engineer will provide you with a solution directly.
support.anycubic.com/VisitorTicket/
Please give me the link for photon workshop v2.1.24
HELP!! got my photon mono x week ago, been struggling with it. The test file work perfect but i download files from online stl and use the photon workshop to slice it and convert it to pwmx. I load it to the flash drive, flash drive displays correct print i wan to print. hit print, begins to print..hours later should 50, 60, 70% etc but i look at the plate and it has built nothing. I am using the any cubic resin. please help?? what am i doing wrong.
Hi, Norberto, you can set up an after-sales order here, and the engineer will provide you with a solution directly. if you have submitted it but have not received a reply, you can tell me the relevant information. I will contact the after-sales staff and contact you as soon as possible. support.anycubic.com/VisitorTicket
Version 2.1.21 of Photon Workshop does not show the same options as this video for the bottom. In the video all of the variables are different than what shows in the app. The app shows settings for Shape, Diameter, Length, Contact Depth, and Angle.
Hi, sir, this is version 2.4. we will release a new instructional video about the new version of workshop in the future. 😊
@@ANYCUBIC3D 2.4 is not even available on your website after a year
Hi, I have a Anycubic mono SE at home. I watched your tutorials video but when I try to print, the printer doesn't recognise my file on the screen. I save it as a "scene" like you seem to do at the end of the video. then put it on my memory stick. And when I plug it to the printer, the printer act like there is nothing in the file. What am I doing wrong ? (my language is french so if you have a french service, it maybe would help better, if not in english)
Thanks
You should not put the scene file on the usb stick. Instead, after you press the "slice" button, you will get a .pwmo and that is the file you need on the usb
When saving your print as a "scene" you will be able to edit the design in the Photon Workshop. However, to print you need to slice the design first. You can see the slice button in the bottom right corner. After slicing a "pwmo"-file will be generated. This file can be used by the printer.
HOW DO YOU MAKE A SLICE FILE???
Hi, sir, after you have finished setting the parameters and support, click icon at the bottom of the left stoolbar, and then you can get the slice file.😊
@@ANYCUBIC3D yes, i found it after clicking around. a popup tooltip might be helpful in the next update
.scene file won't open
why i cant change the "contact shape" and its defaulted to sphere forever? :/
This is some kind of bug currently I think, I know of a few people with the same issue, my guess is the new version of Photon workshop or something
@@raptoid2863 yeah im on the newest version form the website :/ I think I will revert back to one provided wit the printer.
how do I print different 3d models at once?
You can import your model into the software, adjust the size and move the position.
You can import your model into the software, adjust the size and move the position.
How do i get this version back as the updated 3.1 slicer is awful all that support menu has now gone from the side you have to guess work it in settings first then add supports please do a new video for it prove me wrong
Hi there. Please go to the page and find the previous version www.anycubic.com/products/photon-m3
Pourquoi photon ne detecte pas les collisions et pourquoi n’est il pas capable de gérer correctement les impression de supports en highspeed, votre logiciel ne detecte pas correctement les îlot. Pourquoi n’utilisez vous pas le francais qui est langue très rependue sur photon, y en a marre de l’anglais même sur vos machines. La m5s pourrait battre toutes les imprimantes avec un vrai slicer et une interface en francais. Je sais que ca va pas vous plaire mais je m’en moque. Un client mécontent de votre marque, j’ecris en français pour vous forcer à réagir. Désolé pour vous on paye mais au finale on a que peu de chose, elle imprime mais je ferais pas de pub pour votre marque, pas assez sérieux.
okay where tf is the software for mac how do i download the software. shits ridiculous someone direct me
found it if you still need
@@tweetledee7851 figured it out thank you for lookin out!
@@brannanmaier4655 Share the link please
This robotic crap voice over, is so damn irritating and unprofessional.
Hey, why aren't the supports contained within the raft? i.imgur.com/Eyh2TUB.png
There are automatic and manual options, you can manually add support to the vacant part : )
I am trying to upload my first model off of thingeverse i put it in the workshop and slice it. It says its been converted to a pwmo file but when i put the jump drive in the printer it says it cant open the file. I dont know what im doing wrong
Hello dear, thanks for your feedback, you can try to manually name it to the correct format, such as pwmo suffix.