In my 320i N20 I couldn’t find the vacuum line you took off at 1:42 Is it different from what you featured in your video ? If it is what am I supposed to fit in the new intake pipe or it will be left empty ?
Can I use same product for N13 also? Looks pretty much same. Great work with videos Brian. Your videos got me interested in modding my F31. So far I have done black kidney grills and k&n filter and thinking about to do m-sport bumber, soft close doors and speaker/subwoofer upgrade. Greetings from Finland!!
Best video i could find !!!🙌🔥 ,very well explained👌🤙😎. Bud i have A very inportand question if i might , do you have a f30 2016y or 17y and a N20 or N26 ?.... then the second question does it fit on (my) bmw F30 N20 2017? ....😅😬 bud anyways thank you ,very good video keep up the good work 💪🫡
How often do these cones filters need to be replaced? Can this be done on a 320d and will it make a difference to a 320d? In terms of sound and performance
I have an N20 engine, my vacuum line is not attached to the air filter box, they are two and both attached to left side of the top engine cover. Anyone with the same type of N20?
Hey Briana, Thank you for the very useful video, can you please tell if this filter will add any power to the f30 320i or just for the nice sound it will give ?
Did this throw any trouble codes for the maf sensor??? I put an intake in mine and it’s throwing out some weird codes like P00BD. My car is stage 2 91 octane. My bmw is hesitating under boost loads over 3000 ish rpm.
hey Bryan, I bought one for my car, it's a bmw 320i 2015, I like the way the engine sounds and it runs nice, but you know that it jerks me and a census is turned on, I put the computer on it and it tells me that a lot of air enters can you give me
Mine doesnt have that vacuum line either. What did you do? I just left it plugged. Trying to figure out if that effects performance. What did you do with yours?
I run the AFE intake, but I notice the afe intake does not have a vacuum line. Is there a temporary fix to this or should I just get another intake? Which would u recommend MST or Injen?
love your DIY videos! watched a old video of yours from way back on how to de-badge and got it done on my car. was thinking about ordering this from the link, like the way it sounds when you rev it but how does it sound when your just driving around town and not reving it?
Honest question. What kind of improvements does it have to replace the stock intake into something like this, in any petrol engine? Slightly lowered fuel consumption? Can something like this be done in B38 F30? :D Cheers mate!
Can some PLEASE help I recently installed my mst intake on my n20 and I feel like I did something wrong at first I could hear my intake then after a couple of minutes i couldn’t hear anything anymore everything looks to be fine but I’m not so sure
I know this is an old video but I'm having the worst luck finding something. The vacuum line that you disconnected simply by pulling out of some sort of housing. I snapped that housing while moving the unit and now I can't find the replacement anywhere (RockAuto, RealOEM, FCS, etc). Do you have any recommendations?
very good explanation... you are the man.
Thanks for giving us N20 guys some love. Not sure if I would ever do an intake, but cool to see how it could be done.
We love our four bangers! So much room!😅🥺😭😫
In my 320i N20 I couldn’t find the vacuum line you took off at 1:42
Is it different from what you featured in your video ? If it is what am I supposed to fit in the new intake pipe or it will be left empty ?
thank you, brian. I've placed my order and also mst turbo inlet pipe
my 320i doesn't have the vacuum line so i guess i should just cap it on the intake?
it has that nice woosh, woosh sound.
Nice video as always. Thanks!
Can I use same product for N13 also? Looks pretty much same. Great work with videos Brian. Your videos got me interested in modding my F31. So far I have done black kidney grills and k&n filter and thinking about to do m-sport bumber, soft close doors and speaker/subwoofer upgrade. Greetings from Finland!!
Best video i could find !!!🙌🔥 ,very well explained👌🤙😎. Bud i have A very inportand question if i might , do you have a f30 2016y or 17y and a N20 or N26 ?.... then the second question does it fit on (my) bmw F30 N20 2017? ....😅😬 bud anyways thank you ,very good video keep up the good work 💪🫡
How often do these cones filters need to be replaced?
Can this be done on a 320d and will it make a difference to a 320d? In terms of sound and performance
Can this be done if vehicle warranty still valid? Or could it possibly void?
@1.04 what is the hose that you first unclip at the very beginning?
Does anyone know if this will fit an N47??
I have an N20 engine, my vacuum line is not attached to the air filter box, they are two and both attached to left side of the top engine cover. Anyone with the same type of N20?
What about the check engine light afterwards??
Is this still one of the better intakes for the f30?
No should check engine ??
Hey Briana,
Thank you for the very useful video, can you please tell if this filter will add any power to the f30 320i or just for the nice sound it will give ?
It definitely gave more power to mine
Great video, I have a question my new cold air intake doesn’t have the air vacuum sensor nozzle and I don’t know what to do with air vacuum hose!
Mine doesnt have that vacuum line either. What did you do? I just left it plugged. Trying to figure out if that effects performance.
Would this fit on f30 with n47 engine?
From what I've heard the n20 engine and n47 engine(f30) share alot of the same parts ,so it should fit. Please let me know if u try it.
is this workable for 320D? f30?
Did this throw any trouble codes for the maf sensor??? I put an intake in mine and it’s throwing out some weird codes like P00BD. My car is stage 2 91 octane. My bmw is hesitating under boost loads over 3000 ish rpm.
Mines is too. Did you ever find a solution for this?
@@valenchr123 where you able to find a sulution for this, i'm having the same issue
I’m having trouble finding my vaccune line is it necessary to connect into the cold air intake
my heat shield won't fit I'm having a very hard time to get it in place and it feels like I'm going to break something
Any check engine lights with this product?
Nope
Hi,
Do u all leave the stock air duct from behind the grill?
Thanks
For bmw n13
cool thank you!
hey Bryan, I bought one for my car, it's a bmw 320i 2015, I like the way the engine sounds and it runs nice, but you know that it jerks me and a census is turned on, I put the computer on it and it tells me that a lot of air enters can you give me
I have a BMW 116i Stage 2 would this buy be a good upgrade any help appreciated!
My filter came half the size of that one is that normal?
it says its for off roading and race cars would it be fine for my daily
Does this Cold air intake fit on a N47 Engine/320d? i want more fun sounds while driving
Will this work on 320d?
Did you ever find out im thinking of getting one but also have a 320d 2014
Daniel Chetty it should work no matter if it’s D I or whatever. As long as it’s listed in the title.
Hey Bryan, where can I order cone replacements?
I have 318i f30 2015 can i use this intake on my car?
Is this intake better than INJEN?
100%
Hey Bryan, will this fit my 2016 BMW X5 xdrive40e? This hybrid model has the N20 engine but it has been difficult to find aftermarket parts. Thanks
Do all CAI on F30 have that vacuum line? If mine does not what do I do about the vacuum line feed that’s on the MST intake. Interested in getting this
Mine doesnt have that vacuum line either. What did you do? I just left it plugged. Trying to figure out if that effects performance. What did you do with yours?
@@tylerbinder3470 what results did you get from that?
Where do I buy the same intake
Is this mod legal in California?
Can it be installed in a 316?
Will this fit the n47?
can i install at n13 316i?
They need one for the 340
Why no 4th oh July sale ☹
I run the AFE intake, but I notice the afe intake does not have a vacuum line. Is there a temporary fix to this or should I just get another intake? Which would u recommend MST or Injen?
MST! I was originally gonna get injen but MST is better from what I hear.
why don’t I have a vacuum line?
Mine doesnt have that vacuum line either. What did you do? I just left it plugged. Trying to figure out if that effects performance.
would this work on the active hybrid 3
I think the active hybrid 3 has the N55 v6 3.0 turbo hybrid engine and not the n20/n26 engine
i do not wanna destroy my car with my lack of skill 😩
Whats the bp gain ? Great mod gr Lesley
probably 1 -5 hp
👋👋👌
Super informative and helpful video, thank you
That´s a good video. I am from Spain and I have a bmw f30 328i and i have a question, Which is the better intake? this or injen?
Will this fit a n26 f22?
Will this fit 2014 x1 i28x?
Will the check engine light come on?
Didn't for me
Does this install require a tune? My N20 through a fault for excessive air mass
I'm having the same issue even with a tune, where you able to fix the fault?
Just purchased and installed the kit. Thanks for the great install video and the recommendations.
love your DIY videos! watched a old video of yours from way back on how to de-badge and got it done on my car. was thinking about ordering this from the link, like the way it sounds when you rev it but how does it sound when your just driving around town and not reving it?
Thanks! You need the one I have on my car, which is this one: www.kiesmotorsports.com/kiesstore/mst335i?rq=Mst
Will this cause the engine to run leaner?
I noticed that the link to this intake has a different sized filter than the one you put on, is there a reason for that?
I broke the vacuum line plastic, is this part important?
Honest question. What kind of improvements does it have to replace the stock intake into something like this, in any petrol engine? Slightly lowered fuel consumption? Can something like this be done in B38 F30? :D Cheers mate!
also want an intake on my b38!
I just did the upgrade, it seems to improve gas consumption while getting more power, also the sounds is great
why does mine have nothing attached at the vacuum line part??
Can some PLEASE help I recently installed my mst intake on my n20 and I feel like I did something wrong at first I could hear my intake then after a couple of minutes i couldn’t hear anything anymore everything looks to be fine but I’m not so sure
Is it carb legal? Live in CA (heavy sigh)
I don't think it's Carb legal, I looked all over the internet but could not confirm that it was.
I cannot find this for a 320D f30. Can you point me in the right direction please?
Anybody had a problem finding their vacuum line ?
Does this incrase HP? And if yes how many?
Amazing video! What was your job before RUclips? :)
This work on a f31 320d?
have u got an answer yet?
Also have that engine, but i doubt it will work.
Does this work for 2017 330i
hi is this same for the f10 lci 520i intake. as my engine also is n20.
I know this is an old video but I'm having the worst luck finding something. The vacuum line that you disconnected simply by pulling out of some sort of housing. I snapped that housing while moving the unit and now I can't find the replacement anywhere (RockAuto, RealOEM, FCS, etc). Do you have any recommendations?
have you tried a dealer?
You have to buy the whole air box to replace it.
i love this channel
Does the bolts come with the mst intakes?
🙏🏻thank you
can it fit in a 330i?
Really awesome 👌. I have a question if they also fit for f34 n20
Yes they will any n20 motor has a j curve to both bends
Hi I've just brought a bmw f30 320i. I want to buy an intake and would like to know which would be best?