Out of 100 million videos on installing underglows, this truly is the only one that makes me confident that a non-car guy like myself could understand both how to install the ligths and my car itself. Humbly, thank you./
A lot of car things are way simpler than people think they are, you just have to visualize what you are doing and it becomes do-able. Thanks so much for the support and kind words!
Thanks homie for your video it really help, compared to all the other 🤦🏻♂️ I have to say The voice Homie is pretty smooth it's totally radical dude.. thanks
That’s what I’m using. Love the app. I have Govee lights for interior, too. Thankfully, a shop installed mine because I’m not at all “car guy” or DIY outside of filmmaking 🤣
Thank you, I just bought some for my 2016 mustang V6 but had no idea how to actually install them lol Watched another video but she just plugged hers into the cigarette port so it was useless to me
This video helped so much man. Every other video I watched before this basically showed the lights then the car w the lights already installed. Love it!
I love how you actually showed how to wire the damn thing! I will be buying this one specifically because I know how to put it in 🙏 2 years later WHATS your thoughts bro??
Alright,,the comment section is all I need and now I'm going to Install the light I got whenever the weather clears up here 🤣 very informative video bud,,thanks
It’s amazing how many people have had this done now Iv been doing this for guys and friends Iv fitted 20 sets now in the last few months Iv had my set on for 2 years The only thing I don’t like now is it’s 4 cables out of the box. Before it was like a loop plug in one end then plug into the next end was much better. Still it’s good fun
Thank you, I really appreciate that! I try to make my vids as informational as I can without droning on and being redundant although sometimes I can’t help it haha.
One question, when you turn off your lights does the lights still take power from the battery when they’re off? I probably sound stupid but I wanna make sure it doesn’t kill the battery when I do it
I do have a question…you hard wired to the battery…you didn’t tap into a fuse….so 1 will that drain that battery at all? Two do you think it would be smart to attach a inline fuse kit to the positive line? I’m getting ready to install a Govee set to my Nissan and trying to get the most knowledge I can get before I do anything! I have already done the interior govees that was extremely simple so I’m alittle more confident about this.
Yeah that’s one thing you have to plan for when doing mods like this. You’ll need to make sure to install the lights far back enough from the edge of the bottom of the car so they don’t get broken by a lift or Jack.
Dude great question best thing is take it to a skilled mechanic that is smart enough to check the car and lift spots before he has the screw it attitude and messes crap up and I can’t find the link for these
I truely had have the same kit since dec 2021 and never even opened it. Why? Because I was not confident at all in trying. After watching this video getting it done a.s.a.p. Thank you
You can, or you can take a cap that’s on the very end from what you cut off and you can attach it to what is now the new end. Most LED strips will have a cap at the end of the strip and usually you can just pop that out and use it again.
Thanks, the lights don’t really draw power from the battery unless turned on and even then since they are LED they use very little power. I ran these, interior lights, light strips over the headlights and some other lights in my headlights oh and a sound system in the car with no battery issues.
just an idea... you should to the led lights that go around the dash and light up really nice. i wanna do it on my kia. idk if its girly but i like it cause it makes me feel like its a benz lol.
Wouldn't connecting the LEDs directly to the battery drain it? Might seem like a dumb question but I was wondering because I've had problems with like cigarette lighter chargers doing that just being plugged into the car with nothing on them.
I connected to battery just as a personal preference. You can connect them to day time running lights in the fuse box, you’ll just need to make sure you have them on if you want to use these lights. If you connect to battery you can turn them on without starting the car.
Question I seen people use red wire with fuse connector to the battery or is it ok to wire connected to the positive on the led lights directly to battery with ring or do I need them or is it ok to just use them without fuse connector just red ring to the positive? Please let me know thank you
Hey man I’m about to do my underglow soon, is it necessary to install a fuse? I liked how you installed yours and I don’t think I saw you put a fuse on it
Great detailed vid! Thanks for the info. How did you feed it through the engine bay? I'm trying to find the best placement for the wires to feed it underneath through a hole
Luckily the battery in this car was right above a little hole in the skid-plate. I just fed the strips through that hole and had the wiring tucked up next to and under the battery. Really depends on the configuration under your hood, just kind of have to play around with different ideas until you find what looks best for you.
KDM_Curt I got the same kit because of you, and your great instructional Video. It just came in today. I can’t wait to have my car looking fly like yours. thanks again 💯💪🏼
Hey man, mad props to ya! Looks good and a well detailed video. I have a 2015 Hyundai Sonata SE (equivalent to the Kia Optima) and I also have the same exact ramps as you do. I know what it's like and how difficult it is to install the side lights. It's a tight fit See, that's the thing...I had my mechanic take off my splash guard from the undercarriage of my car. I also have an underglow kit but I have a NEON kit by Streetglow. Neon gives off a different kind of light. But hey, looks good man! Huge fan of underglow whether it be Neon or LED!
I was thinking the same... How is LED & old school neon compare... I didn't know you could still find neon tubes tho. I'd assume LED is a lot brighter, but neon does have a nice "hue" to it, but it has been forever since I've seen neon lighting. I have a LED kit that I've been putting off for a while, but need to get it done tho!!
@@LTSRIDE24 Hey there! OK, so yes..Neon Undercar Kits are still available. They are exclusively being made by StreetGlow and nobody else. They are expensive but very well made. I prefer Neon as apposed to LED but LED still has a cool look to it though. LED is more of a concentrated patch of light while Neon is created by two elements of nature. Neon gas and electricity. If you can afford it and want that "traditional" old school glow under your car, then go with Neon. If you want more of a futuristic as well as that "concentrated" look to your light, then go with LED. Neon is more expensive, LED is more cost effective. Neon is one solid color, LED is your choice of many colors in a multi-color kit. Neon has a more "softer" glow to it...LED is harsher in appearance.
I placed the wires through the front center of my engine bay and not on the side cause I wasn’t thinking.. as long as the wires aren’t touching any fans or anything in the engine it should be fine right? Also thanks for the tutorial! It was super easy to follow and I was able to install similar brand under glow lights
Nope you shouldn’t have to fully disconnect it. Just attach ground first (black wire) to the negative post or a grounded part of your car and then the red to the positive.
The only thing this kit should need are those connectors at about the 4:20 mark. You can pick those up at any auto parts store for cheap. Just make sure you get some that will fit on the terminals of your battery. Don’t get ones too small or too big because then the connection could go bad or not work at all.
lol oh it’s not that hard you could do it if you wanted to! Thanks for checking out the channel! Let me know if you have any other car questions. I’ll try to answer to the best of my ability.
Got these same ones for my truck. Problem is I don't know where to position them, especially with the rust under my truck, so the adhesive won't be worth a shit. Are the bolts and holders reliable?
Yeah the little brackets and screws are reliable. However, for attaching to a metal bottomed truck you might want to look at zip ties to hold them in place underneath.
Not enough to actually kill your battery. LEDs use way less power than normal lights. Just make sure to turn them off with an app or remote and you’ll be fine.
You can choose the same effect/scene on both of the sets of strips but I’m not exactly sure that it syncs up perfectly inside and out but it’s hard to tell when both sets are doing the same thing.
Hey I attempted to hook up some underglow lights today and my only problem is the wires are just not long enough to properly go all around with running them in the same hole you used help
Hey man, I just bought these lights for my car and I'm wondering how are they holding up after a few months? Is it a hidden gem or do you get what you pay for?
@@KDMCurt I see, so you really don't need to use one? what happens if it shorts will the whole underglow be no good? or is there something in the control box to counter that?
Is there a way to make sure that these turn on when I unlock my car with the key fob? For example when it's dark I'd like the lights to come on when my headlights turn on when I unlock the car.
Question, with wiring it to your battery directly, does it turn off the power to the under-glow when you turn off the car or do you have a remote wire running off it?
Well you want to be careful where you’re drilling exactly but most of the under side of your car is pretty much plastic so yes you can drill into it with no problem. Just make sure you aren’t drilling into any wires or hoses.
Question? Do they randomly turn on? I was looking at a review online and they said that they came back from vacation and the LED lights were on. Worried about my battery before I do it, but awesome video man
hello! isnt it dangerous to connect the wires directly to the battery. dont you need a killswitch or to connect it to the relay box ? happy for answears :)
@@KDMCurt i just bought 15 volt leds. should i buy killswitch or connect it to the relay box? orr maybe both. i mean if i can connect it to the battery im happy, just dont want to damage the battery or burn up the car haha
LEDs use up so little power it doesn’t drain your battery like car lights used to. If I’m parked at a car meet then I can turn the lights on without having to start up my car each time. I understand there are places in the fuse box I could achieve that with too but I didn’t know that much about wiring at the time when I did this install I was still learning.
Yes of course you can do that, you can do whatever you like with your own car. I’ve seen plenty of blue cars with underglow kits that have blue lights.
For the little rubber brackets you just screw the screw into the bottom of your car. You don’t have to drill holes before (like pilot holes to help get the screws in easier) but you can if you think it will help you.
So I have a bolt on my Fuse box (It's a positive) I was going to attach to and then another bolt nearby for the ground, do I have to disconnect the battery before doing this or just do what you did and connect the negative first? thank!
Haven’t had that issue. Make sure the connectors and wiring is all still firmly secured to the battery. Sometimes while driving they can come loose a little. If that doesn’t help you may want to contact the company and see about getting some warranty replacement strips.
Yes but it’s such a minimal amount due to them being LEDs that it’s not really going to drain your battery. I actually left them on one night accidentally and came out the next morning to go to work and the car started right up. Never had an issue with the battery needing replacing or anything.
I actually don’t have the car anymore, I traded up to a Stinger. But I’ll be using the same brand of lights on it as well, I’ve already installed the interior glow.
Out of 100 million videos on installing underglows, this truly is the only one that makes me confident that a non-car guy like myself could understand both how to install the ligths and my car itself. Humbly, thank you./
A lot of car things are way simpler than people think they are, you just have to visualize what you are doing and it becomes do-able. Thanks so much for the support and kind words!
I agree with you
Was a perfect put together video thank u sir again
I just got Govee LED strips for my WRX and was so overwhelmed until I saw this video. Thank you my guy. Very detailed and informative.
Thanks I really appreciate that! If you have any questions let me know!
Thanks homie for your video it really help, compared to all the other 🤦🏻♂️ I have to say The voice Homie is pretty smooth it's totally radical dude.. thanks
Who turned off the lights dude
Amazing video! Your broke down the process and conveyed it in a proper and simple form! Thank you!
Thanks for the support, I’m glad I could help!
Maaaan been searching on how to connect the wire on battery and you the only one that made it super clear for a beginner like me🙂🙏🙏much appreciated
Glad I could help!
Such a detailed tutorial thank you so much, helped tons! 😄😄
Thanks for the support, I really appreciate it!
Thanks so much, man. Looking to put underglow on my 240 and have always been a little scared of anything that has to do with the battery. Helps a ton!
It’s easier than you think, you got this!
Thanks broski 💪🏻.. felt like this was a way bigger task till I saw this video .. detailed and informative..
Thank you I really appreciate that!
That’s what I’m using. Love the app. I have Govee lights for interior, too. Thankfully, a shop installed mine because I’m not at all “car guy” or DIY outside of filmmaking 🤣
Awesome! Yeah the app is great and pretty user friendly. I wouldn't really consider myself too much of a car guy yet but I'm learning as I go!
Yoooo
What place installed it for you ??
Thank you, I just bought some for my 2016 mustang V6 but had no idea how to actually install them lol
Watched another video but she just plugged hers into the cigarette port so it was useless to me
Cool, I’m glad you found the video. If you have any questions along the way let me know!
This video helped so much man. Every other video I watched before this basically showed the lights then the car w the lights already installed. Love it!
Thank you! Glad it helped you, I try to be pretty detailed in my videos if I can
THANK YOU! This video was the only one that was really helpfull!
Glad it helped!
Had been putting this off but this was one of the better videos on youtube.
Thanks bro
I love how you actually showed how to wire the damn thing! I will be buying this one specifically because I know how to put it in 🙏 2 years later WHATS your thoughts bro??
Well I actually sold the car and upgraded to a Stinger. But, the kit was great while I had it!
Alright,,the comment section is all I need and now I'm going to Install the light I got whenever the weather clears up here 🤣 very informative video bud,,thanks
It’s amazing how many people have had this done now Iv been doing this for guys and friends Iv fitted 20 sets now in the last few months Iv had my set on for 2 years The only thing I don’t like now is it’s 4 cables out of the box. Before it was like a loop plug in one end then plug into the next end was much better. Still it’s good fun
Yeah people are really back into liking underglow now haha
this mans voice was so soothing as i watched the video
Haha thanks!!
Foreal! that intro caught me off guard lol
Bro your voice is unbelievably smooth. Nice video too btw
Haha, thanks I really appreciate that!
Such an amazing and informative video thanks!!! I just ordered my kit too 🥰
Awesome, hope you enjoy it!
I bought a car and it came with “ but did you die? “ sticker so i knew what i sign up for!!!
Hahaha nice!
you buy my 17 wrx? lol
Straight to the point no bs. I don’t like many videos but had to this one👍🏻
Thank you, I really appreciate that! I try to make my vids as informational as I can without droning on and being redundant although sometimes I can’t help it haha.
I'd always use the add a fuse option for power with things like that. Maybe the Amp will be direct connect with inline fuse
Can you add a on off switch to it
One question, when you turn off your lights does the lights still take power from the battery when they’re off? I probably sound stupid but I wanna make sure it doesn’t kill the battery when I do it
This is the best video to learn how to do this, thank you
Glad I could help!
Hey do these led lights draw power even when the cars off
A tiny bit, not enough to drain the battery though.
I do have a question…you hard wired to the battery…you didn’t tap into a fuse….so 1 will that drain that battery at all? Two do you think it would be smart to attach a inline fuse kit to the positive line?
I’m getting ready to install a Govee set to my Nissan and trying to get the most knowledge I can get before I do anything! I have already done the interior govees that was extremely simple so I’m alittle more confident about this.
QUESTION - SHOULD I BE WORRIED ABOUT WIRE HEATING UP INSIDE BONNER OR UNDER THE FRONT ESPECIALLY NEAR METALS THAT GET HOT?
Thank you I’m buying my dream car a charger in about a week this helped a lot!!
Thanks, glad to help!!
I recommend the Blue Ghozt controller.
Bro give us an update hows the ride?
Best video on yt on the topic. Thanks so much for the walk through…
Thanks, I really appreciate that!!
Great video. Really explanatory. Especially the power sourcing.
Thank you!
One more question... if I take this to the shop for routine maintenance, like an oil change, wouldn’t the lift crush the lights?
Yeah that’s one thing you have to plan for when doing mods like this. You’ll need to make sure to install the lights far back enough from the edge of the bottom of the car so they don’t get broken by a lift or Jack.
Dude great question best thing is take it to a skilled mechanic that is smart enough to check the car and lift spots before he has the screw it attitude and messes crap up and I can’t find the link for these
I truely had have the same kit since dec 2021 and never even opened it. Why?
Because I was not confident at all in trying. After watching this video getting it done a.s.a.p.
Thank you
Sometimes you just need a little emotional support lol
@@KDMCurt that's a fact lol
thanks for this now i actually can do it..u did PERFECT EXPLAINING HOW .AMAZING VIDEO BEST ON RUclips
Shame you didn't have a 2nd pair of ramps... Makes many jobs much easier. Of course, we all dream of having a garage with an actual lift!!
Yeah I would love a lift!
Best video I’ve seen so far , this will help now that I’m about to that on my
Civic
Thanks, glad I could help out!
When you cut the strip at the copper should you put electrical tape on the cut?
You can, or you can take a cap that’s on the very end from what you cut off and you can attach it to what is now the new end. Most LED strips will have a cap at the end of the strip and usually you can just pop that out and use it again.
GREAT VIDEO!!! Even better voice!!! Question, Aren't the light always on if their connected directly to the battery getting constant power?
Thanks, the lights don’t really draw power from the battery unless turned on and even then since they are LED they use very little power. I ran these, interior lights, light strips over the headlights and some other lights in my headlights oh and a sound system in the car with no battery issues.
just an idea... you should to the led lights that go around the dash and light up really nice. i wanna do it on my kia. idk if its girly but i like it cause it makes me feel like its a benz lol.
I’ve actually been looking at some of that LED wire lately. You might see a video on it soon! lol
Wouldn't connecting the LEDs directly to the battery drain it? Might seem like a dumb question but I was wondering because I've had problems with like cigarette lighter chargers doing that just being plugged into the car with nothing on them.
I haven’t had any issues with them as long as I had the lights turned off from the app. Battery is still working fine.
This was a perfect video.. you explained everything really well. I’m gonna go ahead & subscribe! 👍
Thanks, I’m glad you enjoyed it! I really appreciate the support!
Where is the best place to mount the control box in the engine bay? Obviously don’t want it to overheat from being to close certain things
The further from the engine the better, I think mine went on the opposite side of the battery from the engine.
is it okay connect on daylight or tail light? or only can connect to battery..?..
I connected to battery just as a personal preference. You can connect them to day time running lights in the fuse box, you’ll just need to make sure you have them on if you want to use these lights. If you connect to battery you can turn them on without starting the car.
Damn brother this video is: SIMPLE, CLEAR AND THE BEST FUCKING VIDEO on you tube, for the underglow lights, you have a new subscriber here 👍🏻👍🏻👍🏻👍🏻👍🏻.
Thanks man I really appreciate that, glad I could help!!😁
Question I seen people use red wire with fuse connector to the battery or is it ok to wire connected to the positive on the led lights directly to battery with ring or do I need them or is it ok to just use them without fuse connector just red ring to the positive? Please let me know thank you
Generally it’s a good idea to use a fuse but it’s not completely necessary with these as the power draw is so low.
I have a 2012 Hyundai Sonota. I’m going to get one up lighting. Think it’ll look cool. The car color is kinda indigo.
Yeah that should look cool!
Hey man I’m about to do my underglow soon, is it necessary to install a fuse? I liked how you installed yours and I don’t think I saw you put a fuse on it
It’s good practice to install a fuse but it’s not 100% necessary. A lot of kits now even come with a fuse already wired in for you.
Great detailed vid! Thanks for the info. How did you feed it through the engine bay? I'm trying to find the best placement for the wires to feed it underneath through a hole
Luckily the battery in this car was right above a little hole in the skid-plate. I just fed the strips through that hole and had the wiring tucked up next to and under the battery. Really depends on the configuration under your hood, just kind of have to play around with different ideas until you find what looks best for you.
Great detailed video. I plan on installing mines this week
Siiick! I bet it will look great!
Good video. All the others I saw were useless guys showing of their cars, cut, then lights are installed.
Thanks!!
How are the underglows holding up till now? Great video btw. Explained everything and showed installation very clearly and easy.
So far so good!!
KDM_Curt I got the same kit because of you, and your great instructional Video. It just came in today. I can’t wait to have my car looking fly like yours. thanks again 💯💪🏼
@@KDMCurt need an update 🤘🏽
Hey man, mad props to ya! Looks good and a well detailed video. I have a 2015 Hyundai Sonata SE (equivalent to the Kia Optima) and I also have the same exact ramps as you do. I know what it's like and how difficult it is to install the side lights. It's a tight fit See, that's the thing...I had my mechanic take off my splash guard from the undercarriage of my car. I also have an underglow kit but I have a NEON kit by Streetglow. Neon gives off a different kind of light. But hey, looks good man! Huge fan of underglow whether it be Neon or LED!
Thanks! Yeah looking back I should have installed it with the splash guard off and his the wiring above it. But now I know for the next video, haha!
you had the mechanic remove a "splash guard" from under your car... stay away from your car LOL
I was thinking the same... How is LED & old school neon compare... I didn't know you could still find neon tubes tho.
I'd assume LED is a lot brighter, but neon does have a nice "hue" to it, but it has been forever since I've seen neon lighting.
I have a LED kit that I've been putting off for a while, but need to get it done tho!!
@@LTSRIDE24 Hey there! OK, so yes..Neon Undercar Kits are still available. They are exclusively being made by StreetGlow and nobody else. They are expensive but very well made. I prefer Neon as apposed to LED but LED still has a cool look to it though. LED is more of a concentrated patch of light while Neon is created by two elements of nature. Neon gas and electricity. If you can afford it and want that "traditional" old school glow under your car, then go with Neon. If you want more of a futuristic as well as that "concentrated" look to your light, then go with LED. Neon is more expensive, LED is more cost effective. Neon is one solid color, LED is your choice of many colors in a multi-color kit. Neon has a more "softer" glow to it...LED is harsher in appearance.
@@Michael030979 great knowledge share - TY!
A lifesaver! Thank you 😭
Glad it helped!
this video is bomb. btw you helped me install my led strips in the car! i have a kia optima as well, thank you!!!!
Thank you! Nice lol Kia gang!
I placed the wires through the front center of my engine bay and not on the side cause I wasn’t thinking.. as long as the wires aren’t touching any fans or anything in the engine it should be fine right? Also thanks for the tutorial! It was super easy to follow and I was able to install similar brand under glow lights
Yes, as long as the wires are away from any moving parts like fans or areas that get really hot you should be fine.
KDM_Curt Awesome, thank you for the reply! I look forward to future content coming out
Thanks for the support, I really appreciate that!!
Will these drain the battery even if it’s off on the app?
Nope, if they are off in the app they shouldn’t drain power. My battery is still going strong!
Hey bro are these waterproof? Are they still good now since you installed them back in February 2020?
Did you have to disconnect the battery while you installed this or is it safe to leave it connected? Great video best one I’ve seen on these lights
Nope you shouldn’t have to fully disconnect it. Just attach ground first (black wire) to the negative post or a grounded part of your car and then the red to the positive.
So what all do we need to buy for the wiring and thanks for the video I didn’t wanna pay too much to install when I could DIY it !
The only thing this kit should need are those connectors at about the 4:20 mark. You can pick those up at any auto parts store for cheap. Just make sure you get some that will fit on the terminals of your battery. Don’t get ones too small or too big because then the connection could go bad or not work at all.
@@KDMCurt alright thank you! I would’ve just gotten any if you didn’t tell me haha
No problem! Let me know if you need any other help with the install.
Man I want this, you should come and do mine lol. Am the scaredy chicken on reddit!
lol oh it’s not that hard you could do it if you wanted to! Thanks for checking out the channel! Let me know if you have any other car questions. I’ll try to answer to the best of my ability.
Thanks man for the video🙏🏾
Thank you for the support!🙏🏻
Got these same ones for my truck. Problem is I don't know where to position them, especially with the rust under my truck, so the adhesive won't be worth a shit. Are the bolts and holders reliable?
Yeah the little brackets and screws are reliable. However, for attaching to a metal bottomed truck you might want to look at zip ties to hold them in place underneath.
@@KDMCurt haha that's what I ended up doing. Zip tied the shit out of it but works great
Will it drain the battery if you do it like that?
Not enough to actually kill your battery. LEDs use way less power than normal lights. Just make sure to turn them off with an app or remote and you’ll be fine.
I just bought a 2020 LX. You should install fog lights or a light bar
I’ve actually been thinking about a light bar recently.
Great idea even better.
How did you protect the wires when you fed it thru to under your car? Mine was melting
If you have Govee lights for the interior, can you sync a light effect with the exterior lights via app? Great video 💯
You can choose the same effect/scene on both of the sets of strips but I’m not exactly sure that it syncs up perfectly inside and out but it’s hard to tell when both sets are doing the same thing.
@@KDMCurt I see, thank you so much 👌🏽
Hey I attempted to hook up some underglow lights today and my only problem is the wires are just not long enough to properly go all around with running them in the same hole you used help
thank you so much for the detailed video but what brand is it i want to get the same exact ones
Thanks! The brand is Govee and these are the “dream color” model. There’s a link for them in the description of this vid.
Hey man, I just bought these lights for my car and I'm wondering how are they holding up after a few months? Is it a hidden gem or do you get what you pay for?
So far they’ve been great for me! I’ve only dealt with a few underglow kits before but this one has been the best for me so far.
Did you use or a fuse or does this come with a fuse, or would you recommend a fuse if needed?
With this simple of a kit a fuse is not completely necessary. No, I didn’t use one.
@@KDMCurt I see, so you really don't need to use one? what happens if it shorts will the whole underglow be no good? or is there something in the control box to counter that?
I know this is an old vid but can you tell me the tire ramp you used
RhinoRamps - amzn.to/3vjNIeC
loved this keep it up i’ll be back for more videos
Is there a way to make sure that these turn on when I unlock my car with the key fob? For example when it's dark I'd like the lights to come on when my headlights turn on when I unlock the car.
You will need to find out what fuse turns on your running lights in the fuse box and wire the power of this light kit to that fuse.
Question, with wiring it to your battery directly, does it turn off the power to the under-glow when you turn off the car or do you have a remote wire running off it?
With it being wired directly to battery it can stay on without the car running. The remote will turn it off.
With it being wired directly into the battery, have you experience your battery being drained?
So if you drill on the bottom of the car, nothing bad will happen? I'm new to working on cars
Well you want to be careful where you’re drilling exactly but most of the under side of your car is pretty much plastic so yes you can drill into it with no problem. Just make sure you aren’t drilling into any wires or hoses.
@@KDMCurt thanks
Question? Do they randomly turn on? I was looking at a review online and they said that they came back from vacation and the LED lights were on. Worried about my battery before I do it, but awesome video man
Hmm I don’t recall ever having that issue. Although if you forget to turn them off thru the app they could potentially stay on for a long time.
hello! isnt it dangerous to connect the wires directly to the battery. dont you need a killswitch or to connect it to the relay box ?
happy for answears :)
It’s good practice to do that yes, but with such a low voltage draw from these LEDs it’s not completely necessary.
@@KDMCurt i just bought 15 volt leds. should i buy killswitch or connect it to the relay box? orr maybe both. i mean if i can connect it to the battery im happy, just dont want to damage the battery or burn up the car haha
Why wouldn’t you connect to the fuse panel instead as it’s live all the time hooked up directly to the battery
LEDs use up so little power it doesn’t drain your battery like car lights used to. If I’m parked at a car meet then I can turn the lights on without having to start up my car each time. I understand there are places in the fuse box I could achieve that with too but I didn’t know that much about wiring at the time when I did this install I was still learning.
So just connect the positive and ground to the battery?
Yes that’s what I did, although you can connect to the fuse box too but easiest is wire to the battery.
@@KDMCurt appreciate it ❤️
I have the Govee on my golf mk6 installed right on the battery, do you know if it drains the cars battery even when the lights are off?
Just purchased these on Amazon thanks for the tutorial!
Awesome! Thank you! Now I know how to do my Mitsubishi
hi buddy,
How would I wire them if I have my battery under my back seat? Since they normally would go on the battery terminal
Awesome! 😁 I was seriously of thinking putting blue lights under my vehicle. But, I have a blue chevy-Equinox. Will I still be able to do that? :D
Yes of course you can do that, you can do whatever you like with your own car. I’ve seen plenty of blue cars with underglow kits that have blue lights.
I’m sure you already know this but you can’t have blue or red or any type of emergency colors while driving in public.
Always helpful💪🏾
Dont see on the street, must be the cops gave them lot tickets😂😂😂,i do my now but in side the car😂😂😂
Thanks for the detailed video man!
Anytime!
So did you drill holes then put screws in?? Kind of confused there
For the little rubber brackets you just screw the screw into the bottom of your car. You don’t have to drill holes before (like pilot holes to help get the screws in easier) but you can if you think it will help you.
So I have a bolt on my Fuse box (It's a positive) I was going to attach to and then another bolt nearby for the ground, do I have to disconnect the battery before doing this or just do what you did and connect the negative first? thank!
Awesome detailed video!
Hey , I Bought These Lights And They Now Seem To Flicker. Sometimes Half Of The Strips Are Off. Does This Happen To You Also ? Great Video By The Way
Haven’t had that issue. Make sure the connectors and wiring is all still firmly secured to the battery. Sometimes while driving they can come loose a little. If that doesn’t help you may want to contact the company and see about getting some warranty replacement strips.
random question but do u got springs or coil overs on that build?
The optima was on D2 lowering springs and Tru-Hart shocks and struts.
Nice! This is surely a head turner
Thank you!
Question? Would it still affect the battery level if its off? Also would it matter which led light we use as long its waterproof
As long as you turn the lights off with the app or a remote it will not drain your battery. Yes any waterproof light strips should work.
Wouldn’t the battery provide power to the lights even when the car is off???
Yes but it’s such a minimal amount due to them being LEDs that it’s not really going to drain your battery. I actually left them on one night accidentally and came out the next morning to go to work and the car started right up. Never had an issue with the battery needing replacing or anything.
Best video I found thank you bro 👍🏽
No problem, thanks for watching!
I bought the same lights for my mazda , how long you think this would usually take to get done ?
Maybe an hour or hour and a half if you’ve got some experience doing it. 2 hours tops.
Dude awesome video👍🏾‼
Thank you!!
How have these lights held up after about 2 years of use?
I actually don’t have the car anymore, I traded up to a Stinger. But I’ll be using the same brand of lights on it as well, I’ve already installed the interior glow.
Did you have to add a shut off switch?
Nope, you are able to shut the lights off using the app.
When u use screws undercar, dont u take off the paint and risk the steel to rust?
This car is basically all plastic underneath so rust isn’t really a big worry.
It's under the car why would you worry about that?