How to Modify a Nerf Vulcan with a Drill Battery

Поделиться
HTML-код
  • Опубликовано: 1 фев 2025

Комментарии • 50

  • @lootgoblin6505
    @lootgoblin6505 3 года назад +16

    i have a question if you used sandpaper to smooth out some of the internal plastic do you think you'd be able to internalise the battery? because it looks like it could be possible with the space provided underneath the feeding wheel for the ammo belt?

    • @BigRedButtonBuilder
      @BigRedButtonBuilder  3 года назад +5

      Yes. I'm planning to include that in a future video. it's tricky because every battery is different. I was going to us a dremel to cut a slot the battery will slide into. The other option is to replace the ammo box and put the battery in there.

  • @scootergrant8683
    @scootergrant8683 3 года назад +22

    Thank you. It's great to see you finally made the tutorial.

    • @BigRedButtonBuilder
      @BigRedButtonBuilder  3 года назад +1

      Glad you like it. I'm going to make a lot better, more complicated stuff using these basics.

  • @totallynotjosh8748
    @totallynotjosh8748 3 года назад +5

    I’m so happy that he started doing mod videos again.

  • @wirththewait144
    @wirththewait144 3 года назад +10

    I did this today because i got the Vulcan for $4.99 at goodwill. Thanks for tutorial :)

    • @BigRedButtonBuilder
      @BigRedButtonBuilder  3 года назад +4

      That's awesome. More Vulcan videos coming soon.

    • @smashedfiend020
      @smashedfiend020 2 года назад +2

      Be careful you might burn the mottor

    • @ItsyaboiDillon
      @ItsyaboiDillon 5 месяцев назад +1

      @@smashedfiend020I’ve heard it can take up to 4s, it’ll be fine!

  • @bob2.02
    @bob2.02 3 года назад +5

    Lol its funny how when I subscribed, he cane back

  • @Brad-yq3zm
    @Brad-yq3zm 6 месяцев назад

    Just done this mod and it works awesome 😁👍🏻 thank you good sir

  • @arsenalx2050
    @arsenalx2050 3 года назад +1

    So I changed the spring on the vulcan I have and it fits and operates fine except for the fact that when I cock it back, the firing mechanism keeps un-priming like after you fire it without me even touching the trigger. What do I do?
    Also ontop of that, the automatic option will activate but nothing happens. Is it the spring?

    • @BigRedButtonBuilder
      @BigRedButtonBuilder  3 года назад

      I'm planning a spring upgrade video. I believe a key part of the spring upgrade is using higher voltage almost exclusively to run it because you have to overcome spring pressure that it isn't built for.

    • @arsenalx2050
      @arsenalx2050 3 года назад

      I see. That makes sense. My concern with amping up the voltage is burning out the old motor which I need to swap out for a brushless one. This Vulcan suffered some bad corrosion after being forgotten out in the rain before I obtained it and had someone it clean and mostly fix it up. The old spring was too corroded so I had someone replace it with a newer one which appears to be weaker than the original because the bullets don't travel as far as it did when it was in its best condition. Is it also possible that the current spring I installed recently is too strong for the gun to handle and that's why it won't stay primed?

    • @BigRedButtonBuilder
      @BigRedButtonBuilder  3 года назад

      @@arsenalx2050 If you're having speed or power issues with the motor I would try removing the green board on the back of the motor as shown in this video. I wouldn't go down the road to replace the motor until the existing one burns out, which has never happened to me, but the board does burn out.

    • @arsenalx2050
      @arsenalx2050 3 года назад

      @@BigRedButtonBuilder Ok. I can do that. will I have to worry about overheating issues with the motor using just a normal battery pack? I don't have a drill battery available just yet.

    • @BigRedButtonBuilder
      @BigRedButtonBuilder  3 года назад

      I wouldn't worry about over heating. The blaster in the super long chain video has slots cut in the plastic over the motor so it can get a little fresh air but I don't think its an issue.

  • @marcusjaquez4267
    @marcusjaquez4267 9 месяцев назад +1

    Does this hurt the motor

  • @Solomon_7609Studios
    @Solomon_7609Studios 2 года назад

    You earn my subscription

  • @MakeTestBattle
    @MakeTestBattle 3 года назад +1

    True classic.

  • @YaGamer2
    @YaGamer2 8 месяцев назад +1

    Muito Obrigado Pela Excelente ideia

  • @kendoe1013
    @kendoe1013 Год назад

    How do you set up the new trigger?

  • @andersonbarber885
    @andersonbarber885 3 года назад +1

    Could you put a stronger spring in it to give a better performance

  • @Thomas_Perez
    @Thomas_Perez 2 года назад

    Does the gun heatup or damage with the upgrade?

    • @BigRedButtonBuilder
      @BigRedButtonBuilder  2 года назад

      Not in my experience. You can cut slits into the frame over the motor so it gets some fresh air.

  • @qwertyytrewq527
    @qwertyytrewq527 3 года назад

    Just awesome!!)

  • @artemshevtsov6062
    @artemshevtsov6062 3 года назад +4

    Where do you put the battery? Or am I going to have to externally attach it?

    • @BigRedButtonBuilder
      @BigRedButtonBuilder  3 года назад +1

      Was going to include that in a future video. If you are replacing the ammo box with a larger one you can put it in there. Otherwise, cut the battery bay so you can slide your battery into it.

    • @artemshevtsov6062
      @artemshevtsov6062 3 года назад

      @@BigRedButtonBuilder ok thanks, great video by the way

  • @Opr8rKaz
    @Opr8rKaz 3 года назад

    Does this work with other guns?

    • @BigRedButtonBuilder
      @BigRedButtonBuilder  3 года назад

      It should but it might be a little different with magazines. What gun do you have in mind? I've been thinking about doing a video on that.

  • @tawhidulislam9526
    @tawhidulislam9526 3 года назад

    Omg this worked

  • @GMDII
    @GMDII 3 года назад +1

    shows soldering tip for torch... who needs it right. lol.

  • @matthewjustice4411
    @matthewjustice4411 3 года назад +1

    So the real ? Here is how much for a ready 1

  • @grandmoffrevan4933
    @grandmoffrevan4933 3 года назад

    How to turn a vulcan into a war veteran ptsd induceing machine, nice

  • @gregdonttrip
    @gregdonttrip 3 года назад

    30 volts is 3 times faster fire rate

  • @thomasroulston8972
    @thomasroulston8972 3 года назад

    At 5:29 why do I hear a zombie pig man from minecraft?!

    • @kermitclassified
      @kermitclassified Год назад

      Its a bird lmao

    • @thomasroulston8972
      @thomasroulston8972 Год назад

      @@kermitclassified no way, damn. I still find it hard to believe. 😂

    • @kermitclassified
      @kermitclassified Год назад

      @@thomasroulston8972 I think he has a few kids. Maybe one of them was playing minecrat.

    • @thomasroulston8972
      @thomasroulston8972 Год назад

      @@kermitclassified wouldn’t surprise me if it was either/or, still funny

  • @arturosolis9215
    @arturosolis9215 3 года назад +1

    Hola

  • @TheGodSharks
    @TheGodSharks Год назад

    hi i got this gun my boss gave it to me but the ammo box and ammo belts are missing how can i found them (in turkey or internet)

    • @BigRedButtonBuilder
      @BigRedButtonBuilder  Год назад

      belt should be on Ebay. use any old plastic box or surplus cloth bag for the box.