Gigabyte GA-78LMT-USB3 Motherboard BIOS Screens
HTML-код
- Опубликовано: 19 авг 2024
- Amazon Link - amzn.to/1UqUGEy
Link to Manual - goo.gl/4OIjkT
Gigabyte GA-78LMT-USB3 BIOS Screens
GIGABYTE GA-78LMT-USB3 (rev. 6.0) AM3+ AMD 760G + SB710 USB 3.0 HDMI Micro ATX AMD Motherboard
Gigabyte AM3+ AMD DDR3 1333 760G HDMI USB 3.0 Micro ATX Motherboard GA-78LMT-USB3
Ultra Durable 4 Classic Technology with high quality components design
Supports AMD AM3+ FX/AM3 Phenom™ II & Athlon™ II series processors
4 + 1 Phase CPU Power design for AMD high TDP 125W CPU support
Integrated ATI Radeon HD 3000 graphics (DirectX10)
PCI-E 2.0 x16 interface for ultimate graphics support
Hybrid EFI technology with DualBIOS for 3TB HDD support
Integrated HDMI/DVI/D-sub for Full HD 1080 contents playback
Four USB 3.0 with superspeed transfer rates of up to 5Gbps
GIGABYTE 3X USB Power with On/Off Charge USB ports
Socket AM3+
Chipset: North Bridge AMD 760G & South Bridge SB710
Memory: 4x 240pin DDR3-1333+(O.C.)/1066 DIMM Slots, Dual Channel, Max Capacity of 32GB
Slots: 1x PCI-Express 2.0 x16 Slot, 1x PCI-Express 2.0 x1 Slot, 1x PCI Slot
Windows 8 Ready
CPU: AM3+ socket Support for AMD AM3+ processor,AMD AM3 Phenom II processor / AMD Athlon II processor
Memory: 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory / Support for 1333+ (O.C.)/1066 MHz memory modules
LAN: 1 x Realtek GbE LAN chip (10/100/1000 Mbit) Наука
I successfully booted off a USB onto the Windows Install screen. Oddly, when I hit F12, its not under USB-HDD, but rather under "HardDrives". When I expand the menu option under HardDrives I have 3, under that Hard Drive Menu is USB-HDD0, I boot from that device, and it works fine.
+Poolarity I was told to boot from the USB I need to disable secure boot? How do I do this? I can't find the option? Also when I go to HardDrives my USB doesn't show up. Please help
+Spencer Abril The other alternative is to create a USB UEFI disk which is the more modern and preferred way if you can't find the BIOS settings to recognize legacy boot disk - look here ruclips.net/video/7IxUprqB2PM/видео.html
+Poolarity Ok well tell me if that method works for what I'm trying to do. I'm trying boot tails which is an ISO file so, what do I do?
+Spencer Abril What file system did you format on the USB drive. I used FAT32 and NTFS and it worked fine for me. exFAT did not work.
+Poolarity i notice that you have configured your sata port as native ide, that's the reason why shows so many ide channels on standar cmos features, Change it to ahci mode on integrated peripherals for better performance.
I swear to god this is the only documentation for this BIOS
Its possible download the manual on the official website
@@DiegoPereiradelemos how can i reduce the speed of the cpu propeller
What
I personally built many machines for people over the years using this board, or its previous iterations 76lm-s2h/68m etc, for earlier AMD chips. I've a few people who are still running these machines to this day. As such for a retro build I'm currently looking to pick one of these boards up on ebay :D
It simulates IDE mode for SATA HDD thats why it shows master and slaves. And memory isn't mislabeled. As CPU has 2 channel memory controller it just showing you put it in DIMM slot related to second controller.
I respect your want to keep stability in your system. I guess another way to look at its overclocking popularity is the fact that people have found good stability even when pushed past stock, and as such someone running a stock system can feel even more comfort knowing that it's capable of much more stress. Great content will be watching more :D
Oooohhh my gosh, I disabled my integrated graphics controller to try get my gpu to work. It didn’t and my screen was black, because of your video I was able to navigate through the bios, change and save it. Thanks
How did you do it ?
Lucas Msantos just follow Along with the video and once you’re done press f10 and then y
Dear Sir Please help me!
I can't enter BIOS even after pressing DEL/F2/F8/F12/END KEY only it shows 'Prepare to Enter' after that "_" this Symbol keeps blinking on the Left Top Side. And I can't enter Windows also. I did every possible trick but nothing works. I did the RAM Changed, Processor Changed, PSU Changed, CMOS Battery Changed and also Reset the CMOS But nothing works, the CURSOR Still Blinks. So, what I will do! Please help me if anyone has the solution. Thank you
thanks dude i shut off internal gfx *blind* with this vid
I cannot access the bios. Can you please tell me the correct key to enter because I feel that I may be pressing the wrong one
same problem here currently, did you ever figure it out?
Meus parabéns pelo seu trabalho e canal
How did you get into it it's not letting me get into it
DEL key for the BIOS Setup and F12 for the Boot Menu
@@PoolarityChannel From the boot menu, can you pick your newly installed SSD (with Windows 10 OS cloned into it) and boot with Windows from there? I would imagine you'd need to access the BIOS Menu to permanently ensure that it boots from the SSD in the future rather than back to the 1TB Hard Drive
@@PoolarityChannel whenever i hit either of those while its booting, it take me to windows repair mode. any advice?
@@kingryall your keyboard is USB?
bruh... my HDD is not even listed in the IDE Channels -.- i dont understand that BIOS :(
can I control my chassis fan speed from this bios? thanks
+poopy catfeet Skip to 7:18 and see if that is what you are looking for, Fan Control
My sons computer says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I went through your video and under CASE OPEN yours says yes and mine says no. Mine also doesn’t show me under HARD DISK BOOT CH1, CH2 and CH3 are not there. It only says BOOTABLE ADDIN CARDS option.
Also it says NONE under all the MASTER AND SLAVES.
Where do i change the bios to uefi ps i have the same motherboard
I have the same issue..
@@iamsabu i found out this model does not have uefi
Have you updated the bios of the motherboard? I have the F3 XD version, but wonder if the F4b works
I have 8gb of ram and bios only sees 4gb help please
same
When I push the power button of the motherboard it starts but doesn't show any signal In the monitor. I have been using the 4 slots of ram with 1333MHz. Any idea? Thanks.
FINNALY I CAN USE A VM AFTER 6 MONTHS OF LOOKING FOR MY BIOS FINNALY
Can i put fx9590 in this motherboard?Does it have 8pin on mothb
FX9590 requires 220w, the max this motherboard can handle is 125w, so you can't.
How to avoid the first 20 seconds video which u have shown.. which display when I start my pc. is there any thing to update r to change settings in BIOS/CMOS. gigabyte 78lmt usb3, phenomll 560 CPU.
8gb corsair ram
120 ssd Kingston
2gb graphic card asus...
Does anyone know where the TPM is on this bios? I can’t find it please?
This motherboard doesn't support, nor have, a TPM socket for the module, or any BIOS settings relating to that. There also isn't anything is relation to Secure Boot. I believe it's Legacy BIOS only.
@@harleysmith9201 Thank you for teh information on this and oh, thats a bommer ehh, thats what i was thinking as i had a look at my mothereboard and it seemed i didnt have the TPM slot, seems like windows 11 aint my way lol
where ll i find virtualization?
how can i reduce the speed of the cpu propeller
actually you can't manipulate fans in bios.you can only turn on cpu smart fan control in PnP/PCI configuration
My front fan stopped working and I cant figure out why. I got a new fan but still doesn't work. The connections for the front fan and 2 top fans don't work either.
how can i disable secure boot. i cant boot from an usb stick
In case anyone else sees this, I dont think you can disable secure boot. Not that I've been able to see. I had the same issue and fir me it ended up being that by usb was plugged into a USB3 port. The issue was resolved when I plugged it into a USB2 port
gigabyte ga-78lmt-s2 secure boot desable this motherboard plz help
how do i disable secure boot?
Did u ever find out
@@domcctx HHAHAHAH bro it’s been 4 years. i think you can disable it from there but imma be real with you homie, i have no idea.
@@waltersixinchsub9861 damn I can’t seem to find out how to, I been tryna find out but appreciate it
wonderful video. sata sometimes plugin closest to cpu most of the time is one.
how to update this mb bios to uefi. i searched the bios update in the website but there is no new bios update there
Hey my computer won't detect my onboard graphics, and in the bio settings I can't see if it's on. In the igx config settings internal graphics mode is on UMA and everything else is in auto. But in my device manager it will only show my GTX card and not my integrated graphics. do you know why this is?
how can i reduce the speed of the cpu propeller
Hey , How to enable my iGPU on my motherboard so i can use it for 2nd monitor , Cant really find it on this BIOS
You have to go to IGX Configuration, then hit the Onboard VGA output Connect and whatever port you're gonna be using (prob hdmi) click D-Sub/HDMI
@@AidenZebra I did this and still won’t work
how to remove that verifying dmi pool data, because it takes like 10-15 sec over ther before windows boot up
I have the same issue, it's really annoying...
thanks a lot man! but can u help me please... i enter the BIOS and go CMOS setup utility, it shows me only 4 IDE Channels; all of them [None], why it cant detect my HDD? and also i am thinking about to install a SSD, and i wanna clone my HDD to that SSD, and i heard i have to change the boot priority, so how does it works? would appreciate if u answer me :-)
Where is the true boot option..plz say
Anyone know why my case fan speed is at 100% constantly (2250 rpm) sounds like a jet engine, but my cpu and gpu don't exceed 50 degrees Celsius at max load? smart fan is enabled but it is still 100% and I cant adjust it from the bios? also the case fan is connected to the MB 3 pin connector.
Because you have a 3-pin system fan and you need a 4-pin for fan control.
Hi,
So I have this board and Im trying to install Win10 from usb but I always get the following error top code system pte misuse.
I need to disable PTT but i cant find it, please help me!
I have this motherboard but when i start the computer inget on the screen amd data change..update new data to DMI? What should i do?
Tenho esta placa GA-78LMT-USB3 e ela não esta lendo os meus hd sata? como configurar Grato!
Does it support UEFI boot?
my doubt about this MOBO is if two indentical memories installed on slots 1 and 3 (or 2 and 4) it runs automatically in dual channel or is it something i must set on bios? if someone could help me with this issue i d be very thankfull
how can i reduce the speed of the cpu propeller
Oh Yes :D i have buy one of this :D I Love the Basic Input Output System :)
+DominikWalkthrough You like the 1990's type BIOS look and feel don't you! :-)
@@PoolarityChannel how can i reduce the speed of the cpu propeller??
How can I get full screen? I connected the monitor through Hdmi cable even after setting the recommended resolution(1920 × 1080) there is 1inch black space on all the 4 sides. Is there any solution?
started my PC without ups bettery...and an error message turns up " system experienced boot failure due to over clicking..." can u help ?
I have the same mobo and whenever i boot up my computer it locks up about 8-9 seconds after i boot the system. and when i say lock i mean it boots to the bios screen (im trying to install and OS) and i can only move my cursor down a few clicks before the pc freezes on the screen im at and wont allow me to move anymore. Please help?
Hey man please help me
I'm not able to enter my boot menu
I have mechanical keyboard i just keep pressing the DEL button but it's not entering the boot menu
Try, F12, F5, or F8, but Try F12 first. If you have one of those keyboards with double functions on the keys makes sure to press FN key with the "F12"
How to jump start this motherboard without a case
It dosent go into bios for me can anyone help?
I have 8gb installed but only 4gb is usable. BIOS recognize only 4gb. Which setting for RAM in BIOS i need to change for all 8 gb to be usable? Thanks.
Can not get into the bios, whatever I do it won't let me enter it.
What buttons are you pushing? Did you try F12, DELETE, F2, while holding it down before it boots?
I brought this motherboard online should come today or tomorrow. So anyone who has used this atleast one year, can you tell me where there any issues? Also did you update the bios from gigabyte site for this motherboard or using it as it is from the box? My processor is fx-6300
How do I flash it?
i have the same motherboard how would i boot a oem recovery partition and make it my main drive?
how do you update bios after downloading latest update? Need to update it for my AMD 8350
if i update the Bios , would it be like yours Blue , or will it be more modern ?!
+OneTruth I doubt it, that would be a major upgrade, usually BIOS are very minor upgrades in nature, not drastic changes
@@PoolarityChannel how can i reduce the speed of the cpu propeller
my Amd Phenon 2 on Gigabyte 78LMTUSB3 R2 is powering on but no Display , even after new GPU initialy worked after a reboot after add hdd , it is not , any advice would be great . (Jumper resetting tried , battery removed and booted )
How do you pause the BIOS screen?
I have amd fx6100(6core)but 3 cores are using & 3 cores are still in sleep..I want to update bios to the latest version..will the problem will be solved?current bios version is F2
Thank you. This helped a lot.
how can i reduce the speed of the cpu propeller
For everyone who has problems with usb booting and everything is ok try with other usb stick. I had 2 usb, one with Windows 8.1 and one with 10.
The usb with 8.1 works și before I presa enter to select IT, i plug off IT and plug in the other. It worked, give it a try
Is there a wake on lan function for this motherboard?
Ahci mode is working for ssd's? Because at the same model r1 version not working.
can you tell me wich rev. is this? and if the rev.6 have the unlock core feature? seems that the rev. 4.1 have the option to unlock cores, but the last rev.6 does not have, or i dont know, i was looking into the manual on gigabyte website
here rev.4.1 download.gigabyte.us/FileList/Manual/mb_manual_ga-78lmt-usb3_v.4.1_e.pdf
and here rev. 6.0 download.gigabyte.eu/FileList/Manual/mb_manual_ga-78lmt-usb3_v.6.0_e.pdf
can you look in the bios if you find „Advaced Core Calibration”?
With this motherboard, is it possible to change the cpu fan speed or not?
how to enable VT?
I recently bought this mother board v 6.0 when i install all the components the fans and leds work but i get no video and no signal on the screen.
Proccesor Amd fx 8320 3.5 ghz
Evga geforce 960 sc 4g ddr5 video card
Thermaltake tr2 600 w PS
I read in a forum that probably is a Bios problem the compatible bios is the F1 but how can i install a bios with no screen?
HELP ME PLEASE!!!
Plug into your graphics card instead of motherboard.
I'm actually having the same issue with this mother board. I had it plugged into the graphics card so that isn't the issue. Guillermo Fernández did you ever solve this problem?
bro, you have to change your "on chip sata" type from Native IDE to AHCI, thats why your drives are coming up as IDE's.
also windows may not boot after this, you may have to do repair install or reinstall etc...you are supposed to set this before installation.
Nah just set up windows to boot in safe mode and then go to bios and switch it to AHCI and then boot into windows safe mode and then set it up to boot normally and reboot normally and windows won’t freak out
+Poolarity can you make a guide to overclock on this mobo
+Zaphron1999 I second that request..
Can this motherboard run two monitors with its Integrated ATI Radeon HD 3000? For example one monitor through HDMI and the other through the D-sub port. Both screens in extended mode, not clone.
No it can't. It only does vga & HDMI. As per the manual. Not sure if you can pull it off by placing a DVI to HDMI adapter. This way you're technically going HDMI & HDMI.
Hey guys, i want to overclock my fx 8350 and my question is if i can pull the voltige on this motherboard up to like 1.45v ?
can you give official driver link for this GA-78LMT-USB3 model..
Brother i m not able to Enable the virtualization in advanced bios settings plz help me/ Processor AMD FX(tm)-4100 Quad-Core Processor, 3600 Mhz, 2 Core(s), 4 Logical Processor(s)
Where can i find secure boot option in this bios menu please somebody tell me
Did you ever find out
how can i open up my bios at first thought?
Spam Del key when u begin restart till u see it show up with bios
wow. how did you pause it at beginning? I can get to that screen but I cannot get into BIOS no matter what I do. f12, del, end f8 nothing works. I have gone on to try every key and nothing. I can get to this screen if I hit delete fast several times but then nothing. other times I can hit tab fast and it will pause it for a second or 2 but then gone. Thanks
I hit the Pause/Break button at the top row of the keyboard
is Gigabyte Technology Co., Ltd. GA-78LMT-USB3 6.0 bios or uefi supported
i have the same mobo, and 2x4 g.skill ripjaw rams @ 1866mhz , but with the oc mode the ram only reach 1600mhz if i put 1866mhz on the bios it says an error and restore it to 1600mhz, i only modify the multiplier but not the voltage, did i need to up the voltage to get the 1866mhz? im scarry to screw my rams, but i want the ram faster because it might help the fx6300 and make less bottleneck in games (i dint have oc on the cpu, but because i dont have a custom cooler, when ive got one i will oc too), any recomendations for reaching 1866mhz?
Yea um where’s usb 3.0 front port
Hey dude just a question, I recently installed an SSD on my system and when I try to set the SATA mode to ACHCI the official software will still say that it wants me to turn ahci mode on? any ideas?
I have gigabyte ga 78 lmt usb3 mobo. Can i install windows 10 via usb drive (flashed by selecting TARGET SYSTEM as GPT disk) and boot it in uefi mode?
Does it support uefi boot feature? Or does it support the same after updating the bios?
NEED SOME INFO ON THIS. APPRECIATE SM HELP!
Little late but am I able to OC my ram to 2133mhz? If so how?
How does it work with a Octo core?
hello bro plz tell me one thing amd fx 4300 unlock processor And gigabyte 78 lmb usb 3 version is best combo r not
i have this motherboard and cannot get into the bios, when i hit f12 the only thing it lets me choose is the initial startup disk. i just got a ssd and am trying to boot from it but am having enormous difficulty. when i boot with ssd it tries to boot with pxe lan booting. i desperately need to get into my bios and cannot figure it out
Well you hit DEL key for bios..not f12 soo...also you can't boot from an empty new SSD..what is on it to boot? So it hits the SSD and since there is nothing on it, it goes to LAN boot. You have to boot from your windows cd or a special windows usb stick you've made.
Hi can we use 2gpus at a time?
Thanks
The screen you had in the very beginning is like almost a flash for me. whenever I try to press delete it doesn't work. everything is plugged in right. how do I access bios?
The screen in the beginning is always a flash, before you boot, you have to keep tapping DEL until you get into the BIOS. If you are using another motherboard it may be F12, F2, F8, but nearly all the time its DEL
Poolarity I keep pressing delete and nothing
Did you try F12 to get into the Boot Menu instead of BIOS first, which should have another button choice for BIOS after the Boot Menu
Poolarity yeah I tried f12, f10, f2, and even end
Are you using the same motherboard? Does your computer have a particular Keyboard Port it must use, such as a PS1 keyboard or the 2 USB inputs that are outside of the other groupings. I've seen that also. If you press Pause does it stop booting, if not its likely your Keyboard is not registering on Boot.
Anyway to disable hardware reserves memory / RAM?
Were you able to disable the memory reserve for hardware? I got CPU-Z showing 16 GB of RAM DDR3 and windows detecting me only 12 GB with 8 GB usable.
Is this support 4tb harddrive
Question: so when i go to over clock my amd fx 8300 8 core processor, i go to the volatges, like the last two voltages, i cant mess with them becuase they dont go highlighted is there a way to fix that or is that how it's supposed to be?
How to change legacy to uefi
Could a do a dual screen with this motherboard
Yes totally I have the same one and it allows up to three screens
I cant figure out how to install windows onto my ssd aaah
my boot menu looks nothing like that. When I press delete it takes me to a menu that says q flash utility v2.24
+T97 Flawless Your Keyboard is likely mis-mapped. the key END brings me to qflash, DEL to the bios menu and F12 to the Boot Menu
Poolarity you were right, it was
Hey, do you know how to boot in safe mode with this motherboard ?
Would be very helpful
depends what operating system you have win10 and i think win 8 dont have safe modes press start type msconfig and change it also remember to change it back when you get it sorted
hey man, i've tried 3 diferent keyboards and none of the work the delete, end, f12 keys when i try entering bios. also tried all usb ports on the board
According to the Manual I have posted in the Description area, the DELETE key enters the BIOS. When you boot up, keep on tapping it at a high rate of speed like 8 times per second to make sure you catch it on Boot Up.
Are you using a PS/2 keyboard to get into the BIOS? I can't access my BIOS with this motherboard because I don't have a PS/2 keyboard and I can't get into BIOS to enable USB legacy support :P
works through USB if you have it plugged in to the USB 2 ports only not USB3
How do I disable the onboard graphics to use my gpu?
See 3:17, usually however when you put in a Graphics card, by default the internal onboard graphics is disabled.
Hi! I have this mobo and tried setting it up with a SC EVGA Geforce 1060 but the mobo doesn't recognize it. It doesn't show up in the device manager or anything. Do you have any Idea of what might be going on?
Have you tried installing the drivers
Does it support 8gb ram sticks?
Whenever I boot I get the error {DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER} I assume this is a problem with the Hard drive. I have fiddled with the Hard drive, messing with its SATA cables on the mobo and Channels in the bios and I have had no luck. Anyone know how to fix this issue?
Maybe your Hard Drive itself is dead and its not the Cable? Are you able to test your Hard Drive in another system?
No I have figured out that the problem is my PC won't read the USB that I am trying to install windows 10 from. So atm I am reformatting it and seeing what works.
you need to boot your usb from the USB 2 slot not USB 3
I figured out the problem a while ago, long and short of it is that the Mac I was downloading the windows OS from had its bootcamp thing corrupted. I borrowed someone else's windows PC downloaded the OS and booted it on my computer. Thanks for your help tho
K no probs I didn't even check the post date