Hello. Great video and to the point. I had to look into this topic because my dji avata did something odd today. I finally had time to use my drone after having it stored for about 6 months. Upon unpacking it i made sure to fully update everything on all devices. I did a test flight outdoors and realized that my drone couldn't even fly from one side of my to the other and even on top of my house without losing a significant amount of signal strength. It went down to 1 and 2 mb strength. This was really odd because 6 months ago i was able to fly above and my house perfectly fine and even fly far away across my neighborhood. The updates i did must have messed with my drones signal somehow. I do live in the us and i do see the manual mode for is available. I will try the 40hz setting and hopefully this helps. Oh and here is another odd thing. Even when i have my drone right next to me the signal strength is around 5 mb. So odd. It should be around 50 mb right next to me
Thanks, mate! Had the same tree problem as you mentioned in the beginning and thought about returning them as with this limitation it's basically impossible to make good FPV shots. Just installed the Beyond software and it works like a charm! Live saver! Love the dreamy look in your vid!
I am having the same result sadly, I get about 300-400m and signal drops significantly although I should be in FCC mode. Seriously contemplating returning for a refund.
Superb video thank you. Straight to the point and a clear solution :) Quick question though, how do you un-install the hack should you need to? Thanks again Craig, top job.
I just bought the avata, placed an sd card in my goggles with the fcc hack into it but I am not able to access the channel mode since it is locked at auto. Any solutions to make the FCC work?
Am wondering just how long it will be before DJI either disables this hack or addresses the problem in their own way. I always find it amazing that problems like this are not resolved before product launch.
It's mind blowing how they seem to turn a blind eye to it, I wouldn't mind if the range actually got close to the stated 2km CE zone spec but it's nowhere near. At least they seem to be okay with the hack, it's been posted all over their forum and they don't seem to care 🤷🏻♂️
@@CraigPitts They are, of course, legally bound only to supply kit with a transmission power within the EU stipulated levels but with the avata is is incredibly bad and removes any possibility of flying within a building seemingly without a clear line of sight. Had already installed this hack before seeing your video and yet to test but will do so possibly today. Unlike other dji drones there is no real way to check if FCC is enabled.
The video transmission problem with Avata is not because of DJI mistake , they're forced by law to limit power to absurdly low values in EU. The 2km applies to a radio transmission (I mean controlling your drone), not a video signal - video needs much more data (transmission power). In my opinion this "hack" was so easy to discover and implement because DJI did it on purpose, so they are not breaking law, and users will discover this quickly and can easily unlock the full potential of their drones.
@@Kamil_Mark is this the same procedure when removing the NFZ? when i did my fpv, the place apparently doesnt have one listed for the avata yet so just curious where to get one
DJI released firmware version v01.01.0200 on September 14th. "Optimized flight safety" is the only point mentioned in the changelog. Who wants to give it a try, if this hack still works with this version? ;)
does this work on the goggles v2 (not the new one) as i fly other fpv drone with air units and vistas with a hack to fcc mod on the goggles and i dont want to mess that up with another hack on the goggles. what do you think ?
Not sure mate I don't have the older goggles, I think it does but it might be worth checking. In any case it's not a hack that affects anything system wise so you won't damage anything
Teeny weeny point....like you I called it the Ah-vah-tar .....but its actually the pronounced av-ah-tar .... avatar ...like the movie . Looking into hacking it myself as getting red horizontal lines on thd video footage.
![Megan Thee Stallion - Mamushi (Remix) [feat. TWICE] [Official Audio]](http://i.ytimg.com/vi/5c0_u9PsrsQ/mqdefault.jpg)
Hello. Great video and to the point. I had to look into this topic because my dji avata did something odd today. I finally had time to use my drone after having it stored for about 6 months. Upon unpacking it i made sure to fully update everything on all devices. I did a test flight outdoors and realized that my drone couldn't even fly from one side of my to the other and even on top of my house without losing a significant amount of signal strength. It went down to 1 and 2 mb strength. This was really odd because 6 months ago i was able to fly above and my house perfectly fine and even fly far away across my neighborhood. The updates i did must have messed with my drones signal somehow. I do live in the us and i do see the manual mode for is available. I will try the 40hz setting and hopefully this helps.
Oh and here is another odd thing. Even when i have my drone right next to me the signal strength is around 5 mb. So odd. It should be around 50 mb right next to me
I guess its to late for me this date and my drone but i will have a look when i have the time
Thanks, mate! Had the same tree problem as you mentioned in the beginning and thought about returning them as with this limitation it's basically impossible to make good FPV shots. Just installed the Beyond software and it works like a charm! Live saver! Love the dreamy look in your vid!
Cheers mate, been flying it since and have much better range now! Happy flying 🤘🏼
Testing this i can say its a huge performance in the video feed, but i dont notice any difference in range...
I am having the same result sadly, I get about 300-400m and signal drops significantly although I should be in FCC mode. Seriously contemplating returning for a refund.
You know what is crazy, I'm in the U.S. and was stuck in CE mode (1 Channel). I had to use the hack as well. I think I'm not alone either.
You’re not. Mine is also in CE mode in the USA.
I could have done with this last night near snowdon 😂🤦🏻♂️ lost signal and it stacked it…..luckily no damage
Ah glad it didn’t break, to be fair mine held up well when it slammed into a tree but yeah not ideal is it!
@@CraigPitts not at all, I’ve crashed 3 times this weekend with it 😂 only grass stains….I need to get back on the Lift Off simulator during the week
Superb video thank you. Straight to the point and a clear solution :) Quick question though, how do you un-install the hack should you need to? Thanks again Craig, top job.
You just delete the file off the sd card in the goggles and then reset them I believe 👍🏻
@@CraigPitts you have to reset your goggles to factory settings.
thank you for that I've had problems with signal. do you think it will affect the warranty.
No it shouldn't do, it's not actually affecting how the drone functions
Can the dji controller 2 be used with this drone instead of the 1 what comes with it
I just bought the avata, placed an sd card in my goggles with the fcc hack into it but I am not able to access the channel mode since it is locked at auto. Any solutions to make the FCC work?
Am wondering just how long it will be before DJI either disables this hack or addresses the problem in their own way. I always find it amazing that problems like this are not resolved before product launch.
It's mind blowing how they seem to turn a blind eye to it, I wouldn't mind if the range actually got close to the stated 2km CE zone spec but it's nowhere near. At least they seem to be okay with the hack, it's been posted all over their forum and they don't seem to care 🤷🏻♂️
@@CraigPitts They are, of course, legally bound only to supply kit with a transmission power within the EU stipulated levels but with the avata is is incredibly bad and removes any possibility of flying within a building seemingly without a clear line of sight. Had already installed this hack before seeing your video and yet to test but will do so possibly today. Unlike other dji drones there is no real way to check if FCC is enabled.
@@droneseyeimages Of course you can check that.
CE= 1 channel at 40mhz
FCC= 3 channels at 40MHz
The video transmission problem with Avata is not because of DJI mistake , they're forced by law to limit power to absurdly low values in EU. The 2km applies to a radio transmission (I mean controlling your drone), not a video signal - video needs much more data (transmission power). In my opinion this "hack" was so easy to discover and implement because DJI did it on purpose, so they are not breaking law, and users will discover this quickly and can easily unlock the full potential of their drones.
@@Kamil_Mark is this the same procedure when removing the NFZ? when i did my fpv, the place apparently doesnt have one listed for the avata yet so just curious where to get one
what there needs to be is a hack to let you use two motion controllers at once to add in more maneuverability
DJI released firmware version v01.01.0200 on September 14th. "Optimized flight safety" is the only point mentioned in the changelog. Who wants to give it a try, if this hack still works with this version? ;)
it does work on this firmware
My Avatar firmware is 01.02.00.00 & goggles firmware is 01.06.00.00
What should I do for get the hack ?
This has saved the day! Can I ask, once you see the new channels do you need to choose one or leave it in auto and it’ll do it for you? Thanks!
You can leave it in auto I think 👍🏻
@@CraigPitts thank you 🙏
@@CraigPitts yes auto.
hey!...do you know how can i remove the hack to googles? i apply the hack but now my googles present problems...is same analogic signal....
You just remove the file from the SD card and reset the goggles I believe
@@CraigPitts yep...i try this but dont work 😫😫
What’s about in the U.S.?
hey guys its not working on latest firmware
The link isn't working. I found on Mads Tech RUclips channel.
its not working for me any help? :)
true !! thank you
does this work on the goggles v2 (not the new one) as i fly other fpv drone with air units and vistas with a hack to fcc mod on the goggles and i dont want to mess that up with another hack on the goggles. what do you think ?
Not sure mate I don't have the older goggles, I think it does but it might be worth checking. In any case it's not a hack that affects anything system wise so you won't damage anything
yes it does work on the v2 goggles, tried and tested..
So, can I buy the Avata in the US and have it sent to me?
The only bad thing about Beyond is that you must hack almost every flight or battery. It will be nice if this was permanent hack.
i cant even set channels to manual
it worked thank you.. like & subs.
Teeny weeny point....like you I called it the Ah-vah-tar .....but its actually the pronounced av-ah-tar .... avatar ...like the movie . Looking into hacking it myself as getting red horizontal lines on thd video footage.
I got the air 2 at about 320 metres it crashes and returns to home. I'll never buy dji again.
The Air 2? That’s weird, I’ve got one of those, flown it all over the world and never had an issue, sorry to hear you have!
Does the file still work?
Anyone tried the hack with the new Goggles Firmware: v01.03.0000 (DJI Goggles 2)?