*****Watch Part 1 here : www.youtube.com/watch?v=db6Zm... This is another test and comparison of the highest RPM ( Revolutions Per Minute ) we can get from six 3650 size brushless motors with different KV ratings. Feel free to tell us which of these motors you have in your rc car, and also share us your experience with that motor .
Thanks! I didn´t get those info because I was only focusing on my speed run builds at the moment ( I was more interested in knowing the motor max RPMs) ... those info will be useful if you run the rc car in the track 👍
Hey. I always watch your videos. I brought (2) EAT 14, after watching your videos. I LOVE WHEN YOU DO YOUR RC RUNS. VERY NICE AND SUPER FAST! I would like to upgrade my cars. What is a good powerful motor and ESC combo that will fit my car? Do you repair RC cars?
IMHO the motors they used in power tools are slower but they have more torque, but we cannot make a conclusion unless somebody makes a direct comparison. Thanks for watching !
Thank you for this nice video! Which motor would you recommend for speedrunning a wltoys 144001 on stock gearing with 3s lipo? I'm currently using a 3650 3300kv motor with a top speed around 100km/h, my next goal is 120km/h.
Nice video thanks I'm thinking bout getting a wltoys 124019 and putting brushless system in it I mainly just drive in street any suggestions as to what motor I should go with
Been using that 4370kv f540 in my traxxas Bigfoot truck. Working awesome so far. If all goes well I'm gonna order 2 more for my rustler an stampede. I might get a fan for it though.
@@chaddison5928 I thunk it was like 40kmh with the high speed gearing for a 2wd stampede. But I put it in my 4x4 pede and it wasn't as fast. So not sure if I'd personally put it in anything 4x4 long term
@@kamilthegreat2834 well yes. You can't use infinity amount of lipos, but the draw on the lipo is low to begin with, there is no load other than shaft and the adapter for optical reading purpose.
Great 👍🏼 test maybe you can get a prop that can fit these moters & scale so we can determine best torque & with the battery 5300mah is even enough for rpm testing imho but hey I’m just another hobby crazy 😜 lol great 👍🏼 job thanks for the great vid
@@RcModwerks23 Thanks. Just got my tach delivered and anxious to start testing a few motors. Going to start breaking in some brushed motors and want to see the difference from out of the bag to broken in.
Do you have any idea if all of these can run smoothly on a surpass hobby 60a ESC? I don't trust that 120a budget blue ESC. Cogging on those things can be felt more significantly too.
I can´t tell because I dont own that specific ESC ... but all these motors will pull 60+ Max Amps. If you want a smooth system, better get a Sensored motor & ESC.
The answer depends on how and where you want to run your rc car ... you can check my other videos using these motors in my Speed Runs. Thanks for watching ! 👍
I have a wltoys 124019 which one fits the stock motor mount and I wanted to get the 5200kv silver one but people say you lose acceleration deos it lose to much or not my goal is 95 km
All of these 3650 brushless motors are direct fit to 124019 ... the selection of motor kv depends on how and where you drive your rc car . If you want speed and drive on-road only then the 5200 kv is Ok ... it can hit 120+ km/h on 2s and 140+ km/h on 3s. But if drive off-road better get a lower kv motor. Check my other videos and see the kv I use and top speed I get with them. The 4500 kv got me 120+ km/h on 3s at 3/4 throttle.
Which model is your rc car? You got a very high goal of 200 km/h ... i think None of these motors can get you there. .. you need to look for a TP motor and Castle ESC for that speed goal.
@@RcModwerks23 yes sir! I bought turnigy motor but with higher kv last month, it pushes my 144001 to 79mph on 2s! With castle ESC Idk name but it is perfect fit
just subscribed on your channel sir, your vid comparison is very clear, may i know if i can use a simple 3s lipo batt on 3650 5200kv brushless, it says 9.6v is the max voltage. im using an unbranded 120a esc. thank you
Hi Sir, Is the surpass 4300kv with 60A esc platinum combo fine to run up to 3s?(but I mostly run 2s) I just want to do some pop up wheelies and fair speed on my wltoys A979b truck now with bigger 80mm wheels...thanks for the videos! 👍🏻😊👍🏻
I just blew up my 60amp esc with the 4300 kv on 3s surpass platinum combo. About the 3rd run but it was a 4x4 MT. I only ran it because thats what was in the combo and awaiting my 120 amp. :/. Sorry. Be careful.
Yes, there will be no issue for the 4300 kv motor to run on 3s since it will only be around 47k RPM (which is not yet exceeding the 50k Max RPM recommended by most manufacturers).The more sensitive piece is the ESC, so just make sure that you will get a good one and 2s-3s capable. I don´t own a Platinum series ESC so I can´t comment about it. Thanks for watching my videos! 👍
@CDS ....Yes, we should always be careful with the ESC (personally I always check the Temps) because it is the part which usually fails instead of the motor. The cheaper brands generally are more prone to getting burned when abused or misused, but I also saw many expensive one like Castle Mamba ESCs that also get smoked. So, as you said, be careful.
Do you have any problem running the Surpass Hobby KK series 3650 with those BLUE ESCs? I'm trying to have a similar setup for my beetleweight battle bot using the 3650 4500KV + 120A blue ESC.
Hello, very good engine comparison. I wanted to ask you if an ESC 80A Surpass Hobby would break down with a surpass hobby kk 3650 7700kv motor (max 95A amps) and a 7200mah 7.4v lipo battery? I think that due to my ignorance I should have bought a 4500kv motor (max amps 75A). Thank you for your help in advance.
Thanks ! I dont have that specific ESC, but it sshould be OK since I was also using a Hobbywing 80A ESC with my 7700kv motor without any issues. The motor will easily get hot due to the high kv, so you only need to watch the ESC & motor temps. 👍
95Ah @ its max voltage but at 7.4V Lipo (8.4V) it may only simmer, But! your right prolly should of gone for a lower kv to start with and work your way up the motors are pretty cheap these days
All these motors will be good for Wltoys 124019, but the selected kv will depend on what is your goal . Higher kv motor is faster but it will be hotter than the lower kv.
@@zeurdozeurdo5409 you can get 3600 kv to 4300 kv and pair it with 60 amp ESC .... the stock motor is comparable to 3200 kv, so you will get even faster than the stock motor
*****Watch Part 1 here : www.youtube.com/watch?v=db6Zm...
This is another test and comparison of the highest RPM ( Revolutions Per Minute ) we can get from six 3650 size brushless motors with different KV ratings.
Feel free to tell us which of these motors you have in your rc car, and also share us your experience with that motor .
Awesome video, thought about testing the same kv but seeing which one draws least current and what temperature they reach?? Keep up the great work!!
Thanks! I didn´t get those info because I was only focusing on my speed run builds at the moment ( I was more interested in knowing the motor max RPMs) ... those info will be useful if you run the rc car in the track 👍
Really really well done mate.really interesting and eye opening
Thanks! but this is just an RPM test wihout load, and each motor might perform differently under load.
Awesome comparison and tests 👌 great video bro 👏
thanks bro! 👍
Hey. I always watch your videos. I brought (2) EAT 14, after watching your videos. I LOVE WHEN YOU DO YOUR RC RUNS. VERY NICE AND SUPER FAST! I would like to upgrade my cars. What is a good powerful motor and ESC combo that will fit my car? Do you repair RC cars?
Hey, I always wonder how these hobby grade motors compare to the performance of the brushless motors on cordless power tools.
IMHO the motors they used in power tools are slower but they have more torque, but we cannot make a conclusion unless somebody makes a direct comparison. Thanks for watching !
This is a great comparison! Thank you for making this video! May I ask, can I use a 3S LiPo battery on a 80A Brushless ESC?
Yes you can, as long as the ESC is rated for 2s-3s lipo
I thought the green 1 was castle I was like yep that wins 😂
The motor brand is X-Team
Thank you for this nice video!
Which motor would you recommend for speedrunning a wltoys 144001 on stock gearing with 3s lipo?
I'm currently using a 3650 3300kv motor with a top speed around 100km/h, my next goal is 120km/h.
If your speed goal is 120 km/h in 3s lipo, either the 4300 kv or 4500 kv can do the job. Thanks for watching!
@@RcModwerks23 thanks for your answer! Do you think 5200kv would give me even more speed or would it have too little torque then?
@@ValFPV Yes, it will be faster but runs hotter
Nice video thanks I'm thinking bout getting a wltoys 124019 and putting brushless system in it I mainly just drive in street any suggestions as to what motor I should go with
Get the ones with lower kv ( 3600-4200 kv ) and it will be good for street driving... the equivalent of the stock 550 motor is aorund 2800 kv only.
@@RcModwerks23 so a 3100KV + 60A ESC should be fine for 2S and 3S , i want to upgrade my 124018 to brushless and to avoid overheating .
asalam tuan... esc brand surpass ok tak tuan...
Thanks for watching! 👍
Been using that 4370kv f540 in my traxxas Bigfoot truck. Working awesome so far. If all goes well I'm gonna order 2 more for my rustler an stampede. I might get a fan for it though.
Good that it´s working well for you. You can also try the 3650 size motor even if it´s the same kv, it will give yuo more torque compared to the F540.
@@RcModwerks23 yes I'll probably have to change gearing for 4x4 Motor gets pretty warm.
What's the top speed and would you recommend it for a rustler 4x4?
@@chaddison5928 I thunk it was like 40kmh with the high speed gearing for a 2wd stampede. But I put it in my 4x4 pede and it wasn't as fast. So not sure if I'd personally put it in anything 4x4 long term
@@Speedslays oh ok thanks for the info and have a great day/evening
What attachment did you put on the motor for the test?
It was a
dIY piece made from an old pinion gear
Would be interesting to see this teat on a proper power supply that wont have voltage sag.
Thanks for the input 👍
All you have to do is parallel another lipo or 2 to get no voltage drop or sag over time thru the test
@@yogamon itll still dip even with 3 in parallel but not so much.
@@kamilthegreat2834 well yes. You can't use infinity amount of lipos, but the draw on the lipo is low to begin with, there is no load other than shaft and the adapter for optical reading purpose.
@@kamilthegreat2834 or use a life battery with flat discharge curve
Great 👍🏼 test maybe you can get a prop that can fit these moters & scale so we can determine best torque & with the battery 5300mah is even enough for rpm testing imho but hey I’m just another hobby crazy 😜 lol great 👍🏼 job thanks for the great vid
Thanks for watching! 👍
So the surpass hobby red better than the plantinum one?
They are almost the same but the red one is a bit faster in my experience
Can they make more rpm with higher batterij voltage?
Yes, as long as you dont exceed thier maximum RPM which is 50k RPM
What about a 540/7.5t v3 surpass hobby motor. With a 120hobbywing esc? On 3s??
Sorry I dont have that motor
What motor would u recommend for a traxxas slash 2wd dirt track racing it
I am not familiar with that rc car, but i think the lower kv motors will be good
What are you using on the shaft to attach the reflective tape to?
That is a DIY piece I made from a pinion gear
@@RcModwerks23 did you just grind down the teeth?
@@cage-rattler nope, I glued a plastic piece around it
@@RcModwerks23 Thanks. Just got my tach delivered and anxious to start testing a few motors. Going to start breaking in some brushed motors and want to see the difference from out of the bag to broken in.
Do you have any idea if all of these can run smoothly on a surpass hobby 60a ESC? I don't trust that 120a budget blue ESC. Cogging on those things can be felt more significantly too.
I can´t tell because I dont own that specific ESC ... but all these motors will pull 60+ Max Amps. If you want a smooth system, better get a Sensored motor & ESC.
@@RcModwerks23 thanks boss!
@@aizatnorman no problem 👍
Interesting video! The last motor did 41,996 rpm and was the fastest, but in the comparison picture at the end those numbers are wrong.
Yes, true ! That was a typo error ... thanks for watching 👍
@@RcModwerks23 It doesnt matter, its one of the best videos Ive seen in a while! Keep up the good work!
@@niklasmoller4121 Thanks for those encouraging words ! 👍
What the best one?
The answer depends on how and where you want to run your rc car ... you can check my other videos using these motors in my Speed Runs. Thanks for watching ! 👍
@@RcModwerks23 thanks a lot for your suggest my friend
how many amperes of esc do you use?
120Amp ESC
I have a wltoys 124019 which one fits the stock motor mount and I wanted to get the 5200kv silver one but people say you lose acceleration deos it lose to much or not my goal is 95 km
All of these 3650 brushless motors are direct fit to 124019 ... the selection of motor kv depends on how and where you drive your rc car . If you want speed and drive on-road only then the 5200 kv is Ok ... it can hit 120+ km/h on 2s and 140+ km/h on 3s. But if drive off-road better get a lower kv motor. Check my other videos and see the kv I use and top speed I get with them. The 4500 kv got me 120+ km/h on 3s at 3/4 throttle.
What is your tools to measure rpm ??
Please check the link shown in the Description 👍 .. it is called Tachometer
@@RcModwerks23 sorry i didn't see.. Thanks for your super test 👍
@@nikko9167 you are welcome! Thanks for your support to this channel... You will see these motors in action soon.
@@nikko9167 You are welcome, this is the link: DIGITAL TACHOMETER : www.banggood.com/custlink/KK3hHBwygn
Nice work bro
Thanks for the visit 👍
Hello,can suggest me,which best power brushless motor for 200km?
Which model is your rc car? You got a very high goal of 200 km/h ... i think None of these motors can get you there. .. you need to look for a TP motor and Castle ESC for that speed goal.
@@RcModwerks23 hello,rc model buggy 124019,?
@@zaideybzakariazaideybzakar3198 There are only 2 persons who were able to reach 200+ km/h with 124019 and they are using TP motor
@@RcModwerks23 tq,all the best
@@zaideybzakariazaideybzakar3198 Thanks, no problem 👍
Finalllyyy thank you :)))
You are welcome ! Yes, I remember that you were asking for more motor RPM tests few months back 👍
@@RcModwerks23 yes sir! I bought turnigy motor but with higher kv last month, it pushes my 144001 to 79mph on 2s! With castle ESC Idk name but it is perfect fit
@@fran.6496 That´s awesome! 79 mph on 2s is very fast 💪
just subscribed on your channel sir, your vid comparison is very clear, may i know if i can use a simple 3s lipo batt on 3650 5200kv brushless, it says 9.6v is the max voltage. im using an unbranded 120a esc. thank you
Thanks, yes you can run it with 3s but watch the temperature so that motor will not overheat... 5200 kv will be very fast even with 2s lipo only
Which model of rc car you have?
@@RcModwerks23 im gonna use it on my built boat ,20 inch outrigger, no gears, direct to propeller.
@@MrPD-uu7wr I dont have yet any rc boat, but I think there will be no problem since motors on rc boat generally have a cooling system
@@RcModwerks23 maybe a 3s with a lower c rate, like 25c, 2000mah.will it do?
The main parameters are Output/Input Power and Efficiency at this power.
Thanks for watching! 👍
Hi Sir, Is the surpass 4300kv with 60A esc platinum combo fine to run up to 3s?(but I mostly run 2s) I just want to do some pop up wheelies and fair speed on my wltoys A979b truck now with bigger 80mm wheels...thanks for the videos! 👍🏻😊👍🏻
I just blew up my 60amp esc with the 4300 kv on 3s surpass platinum combo. About the 3rd run but it was a 4x4 MT. I only ran it because thats what was in the combo and awaiting my 120 amp. :/. Sorry. Be careful.
Yes, there will be no issue for the 4300 kv motor to run on 3s since it will only be around 47k RPM (which is not yet exceeding the 50k Max RPM recommended by most manufacturers).The more sensitive piece is the ESC, so just make sure that you will get a good one and 2s-3s capable. I don´t own a Platinum series ESC so I can´t comment about it. Thanks for watching my videos! 👍
@CDS ....Yes, we should always be careful with the ESC (personally I always check the Temps) because it is the part which usually fails instead of the motor. The cheaper brands generally are more prone to getting burned when abused or misused, but I also saw many expensive one like Castle Mamba ESCs that also get smoked. So, as you said, be careful.
@@RcModwerks23 thanks, will look for 80A or stay with just using 2s on it👍🏻😊👍🏻
@@cds1223 thanks, will look for 80A or stay with just using 2s on it 👍🏻😊👍🏻
Top 👍🏻
Thanks
Do you have any problem running the Surpass Hobby KK series 3650 with those BLUE ESCs? I'm trying to have a similar setup for my beetleweight battle bot using the 3650 4500KV + 120A blue ESC.
It was ok for 2s lipo only
Would you please start showing the name/brand of each motor before you test it. Not just the specs. Thanks. It would really help.
Please check the Description box. Thanks for watchng !
Link to the motors?
please check the Description box, but some of these motors are no longer available since I bought some of them 2 years ago
Hello, very good engine comparison. I wanted to ask you if an ESC 80A Surpass Hobby would break down with a surpass hobby kk 3650 7700kv motor (max 95A amps) and a 7200mah 7.4v lipo battery? I think that due to my ignorance I should have bought a 4500kv motor (max amps 75A). Thank you for your help in advance.
Thanks ! I dont have that specific ESC, but it sshould be OK since I was also using a Hobbywing 80A ESC with my 7700kv motor without any issues. The motor will easily get hot due to the high kv, so you only need to watch the ESC & motor temps. 👍
95Ah @ its max voltage but at 7.4V Lipo (8.4V) it may only simmer, But! your right prolly should of gone for a lower kv to start with and work your way up the motors are pretty cheap these days
聲音小轉速快，才是好的馬達
Thanks for watching! 👍
Hello
You can give me tips for a full engine for a 124019 wltoys
Thanks in advance
All these motors will be good for Wltoys 124019, but the selected kv will depend on what is your goal . Higher kv motor is faster but it will be hotter than the lower kv.
@@RcModwerks23 Just for a leisure ride, I'm a beginner. Thank you
@@zeurdozeurdo5409 you can get 3600 kv to 4300 kv and pair it with 60 amp ESC .... the stock motor is comparable to 3200 kv, so you will get even faster than the stock motor
@@RcModwerks23 Thank you
I found an engine 3660 4000kv max10 SCT
@@zeurdozeurdo5409 that´s a good electronics combo 👍
something is wrong with your measurement. I hear different RPM's with my ears. :)
Every motor sounds differently because they are different brands
….when you don’t see your motor in the line up cause it’s cheap and made in china but still rips 😂😂😂😂😂
No problem as long as it works well
Intro is loud and annoying, otherwise video is OK
Thanks for the input and watching my video 👍
Lol into was dope…
Sir please tell me . Where can i buy 4000kv bldc motor
Try Bangood or Aliexpress. Thanks for watching! 👍