Can the elements be tested by applying 12v to the wires to see if they heat up ? Also are there generally only 2 wires on these circuits , pos and earth ? Thanks
Hi... My back element works fine.. My seat is working very weak.. What if the resistance is double than it should be? The element is working but is not warm enough.. I don't see any broken wire
@@mistyg7440 hi.. Yes I did.. The wiring was broken... Soldered them together and it works fine now... 90% chance is that it snapped in the side cushion near your leg... From getting in/out the car
Great video this what I was searching for.
Glad I could help
Can the elements be tested by applying 12v to the wires to see if they heat up ?
Also are there generally only 2 wires on these circuits , pos and earth ?
Thanks
What brand of MAF sensor should I get to replace mine in a 2006 rover HSE 4.4l? I read sometimes they are finicky on which brand to go with.
Hi... My back element works fine.. My seat is working very weak.. What if the resistance is double than it should be? The element is working but is not warm enough.. I don't see any broken wire
Hey mate having the same problem, have you sorted it by any chance
@@mistyg7440 hi.. Yes I did.. The wiring was broken... Soldered them together and it works fine now... 90% chance is that it snapped in the side cushion near your leg... From getting in/out the car
Where are you taking an ignition live for the LH and RH seats?
What about the airbags. How can I tell which connector is to those. ?
If you don’t know, you shouldn’t be touching wiring. Airbags are always marked yellow insulation.
👍 thanks