For old times sake, I would enjoy one of your refurbishment, restoration, repair, renew projects on a sad, sorry piece of furniture that is begging for your special touch, attention to detail, concise explanations! 💜💜💜
One piece of advice: When you try to do use the router on such a thin piece, clamp another piece flush with the first piece to increase the surface area your router rests on. It's much safer and your cut will be cleaner because the router will be more stable.
Wood Preserver amzn.to/3IxOqah (Amazon UK) geni.us/4xWgU9 (Amazon Worldwide) this is my favourite preserver as it protects against loads of stuff - unfortunately I couldn't get it at the time I did this project so you'll see I'm using a different one in the video Polyurethane Glue amzn.to/3uLKgWJ (Amazon UK) geni.us/BW7aV (Amazon Worldwide) Ronseal Fence Life Plus Dark Oak Stain amzn.to/3PjucTM (Amazon UK) geni.us/8a6hbc9 (Amazon Worldwide) 🔨 MY TOOLS 🔨 For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn a small commission from qualifying purchases UK affiliate store: www.amazon.co.uk/shop/ragnbonebrown US affiliate store: www.amazon.com/shop/ragnbonebrown 🤝 HELP SUPPORT THE CHANNEL 🤝 Support with RUclips channel membership: ruclips.net/channel/UCVyE_6jEtVZGmYGXtUOL5FQjoin Support with Patreon: www.patreon.com/ragnbonebrown Support with PayPal paypal.me/ragnbonebrown Shop With Amazon using my affiliate link: geni.us/iWD3K 💰 SHOP 💰 Etsy: www.etsy.com/uk/shop/KeithBrownMaker teespring.com/stores/rag-n-bone-brown-merch 🎧 WORKSHOP BANTER PODCAST 🎧 ruclips.net/user/workshopbanter Also available on Spotify, Apple, Google and most other podcast platforms 🔗 LINKS: 🔗 Website: www.ragnbonebrown.com Facebook: facebook.com/ragnbonebrown Instagram: @ragnbonebrown Twitter: twitter.com/ragnbonebrown Email: ragnbonebrown@gmail.com Second RUclips Channel (non woodwork videos): ruclips.net/user/keefykeef
A great video once again. One tip I would give is to order an extra fence for the router from their spare parts list, then you can use both fences at the same time, one on either side of the work piece. I know this works on a lot of routers however it is worth checking first that the rods are long enough and if there are holes on both sides of the router base.
Hi Keith Just out of curiosity, I was wondering which wood filler you used to fill the holes. Also, if you had to cut the old gates in half to get them to your workshop, how are you going to get them back to your auntie. Great little project and the gates turned out really good.👍
Great questions. The filler was just a test mixed one, it said exterior and interior on the tub but realistically I'm not sure how well it will hold up, it'll be interesting to find out. It's somewhat protected by the stain so maybe it'll do ok. Luckily my auntie's neighbour was able to pick up the gates, which saved a lot of hassle, couldn't have got them on my roof rack, so hiring a van was going to be the plan but now sorted
Nice one, thanks for sharing the nifty design cutting the braces into the centre rail. Much as I'm enjoying my foray into woodwork, I'm not yet very good at conceptualising joinery, so I find explanations like that really helpful... On another note, I see the battery in your drill lat 12'07" looks suspiciously similar to the dimensions of Parkside's 12V, so I wonder... On another another note, shelled out £140 inc. VAT & delivery for 20 decking boards 140 x 28 x 2400 mm from Wickes (I know, I know) last week. Cheers.
Nice job! I once tried DIY, I hit my thumb with a hammer, stood in a paint tray, and nearly cut my fingers off with a jigsaw. That was all in a few hours, and that was when I realised it wasn't for me.
I ruined a screwdriver I'd had for yeras taking out rusty screws that had been in some fence wood I was salvaging - using a pair of pliers or a vice grip is a good idea. Good video.
Pinapple shorts! :D But no, I actually have a serious question/discussion point. Perhaps an idea for the podcast. When you say that using salvaged materials made for a substantial saving, I guess you haven´t factored in your time spent salvaging/preparing the materials. If you were to "pay yourself" a decent hourly rate for it. Would it still be a substantial saving? I find that kind of hard to belive, even with timber prices as they are now. Of course some types of material are easier to salvage than others. And don´t get me wrong, I all for the environmental aspect for using salvaged materials. Cheers and thanks for a great video.
😁 Thanks Keith. Another great video. I've just received a massive haul of deck boards for a couple of projects so this was a well timed video 😁. Thanks again... wait a minute... where is Mickey ??? 🤣🤣
The gates look very nice in the finished photo Keith, great use of the reclaimed decking. The diagonal braces let into the wood look impressive as well as being stronger. Tony
Great video Keith and lots of useful info on the design. Always good to see wood being reclaimed and reused. The links are really useful - too shame there wasn't a link to those shorts.
Them yellow shorts again! Gonna have to have a word with Ria about them getting “lost” when she does the washing!! Nice job on the gates though, looking forward to seeing them hung. Stay safe x
Great video again kieth. Been after some gate inspiration as it were for wee while. They look good. Can't wait see the fit and the other upcoming projects 👍🏴
Good job thanks for sharing....... Now the devil in me was waiting for you to say "after finishing the gates I had to cut them in half to deliver them back to my auntie" 😂😂 Oh by the way, thank you Keith for recommending Ben's channel Hew and Awe.
Ok. So I'm gonna have to go back and watch this again. Really nice build. Love the use of the decking boards. Which has inspired something else for me.. I cannot find anyone local to make gates. Live in a council house and there were no gates on the driveway. I looked for years and couldn't find anyone. I don't have the money to get someone to do it now but I'd still like some. Ours would be way smaller than the ones you made. Just for a driveway. Yeah definitely churning ideas with those decking boards now. Defo have to go watch again and pay proper attention. Thank you so much. Have you ever made a screen door? That's a project I want to tackle soon. Really soon with this great weather and two kittens who are only getting vaccinated next week! I'm melting!
Another great video mate, ive been dreaming up some small gates for part of my garden, and this video has definitely come in handy. Will have to rewatch it closer to our summer here though haha! Cheers
I'm building gates next week, 2 driveway and 1 side gate, can't say im looking forward to it. But will be half lap joints, are the other gates you made holding up okay?
Great little video mr and too see you use reclaimed timbers a lot of work stripping down but l think it’s worth it good too see you use the router l love my Milwaukee m18 router but I must admit I have not used the spiral bits l must look into them take care 👍👏👏
Great video.I really like how you are able to build something new out of recycling old timber.The gates are looking really good and the way you think things thru like the bracing of the larger gates as the timber was not long enough is excellent.Look forward to episode 2.Thanks for the link to the wood preserver i deffo need some.As for favours to the wife i think you should clean the oven and do the washing up for a week.lol 👍
Depending on nothing getting in the way if you drop the broad at 2:00 flush to the workbench your have loads more reference surface and you can run your router fence against your vice jaws.
Nice project so far. Looking forward to seeing how you go about hanging these gates. I've hung two large gates on two occasions and I have a 'trick' of my own for doing it :) Mind you, it was just two gates, not three . . . . . . . :)
For old times sake, I would enjoy one of your refurbishment, restoration, repair, renew projects on a sad, sorry piece of furniture that is begging for your special touch, attention to detail, concise explanations! 💜💜💜
Yeah miss those videos
Dressing table and two wardrobes still on my to do list and in storage waiting ...
One piece of advice: When you try to do use the router on such a thin piece, clamp another piece flush with the first piece to increase the surface area your router rests on. It's much safer and your cut will be cleaner because the router will be more stable.
Wood Preserver amzn.to/3IxOqah (Amazon UK) geni.us/4xWgU9 (Amazon Worldwide) this is my favourite preserver as it protects against loads of stuff - unfortunately I couldn't get it at the time I did this project so you'll see I'm using a different one in the video
Polyurethane Glue amzn.to/3uLKgWJ (Amazon UK) geni.us/BW7aV (Amazon Worldwide)
Ronseal Fence Life Plus Dark Oak Stain amzn.to/3PjucTM (Amazon UK) geni.us/8a6hbc9 (Amazon Worldwide)
🔨 MY TOOLS 🔨
For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn a small commission from qualifying purchases
UK affiliate store: www.amazon.co.uk/shop/ragnbonebrown
US affiliate store: www.amazon.com/shop/ragnbonebrown
🤝 HELP SUPPORT THE CHANNEL 🤝
Support with RUclips channel membership: ruclips.net/channel/UCVyE_6jEtVZGmYGXtUOL5FQjoin
Support with Patreon: www.patreon.com/ragnbonebrown
Support with PayPal paypal.me/ragnbonebrown
Shop With Amazon using my affiliate link: geni.us/iWD3K
💰 SHOP 💰
Etsy: www.etsy.com/uk/shop/KeithBrownMaker
teespring.com/stores/rag-n-bone-brown-merch
🎧 WORKSHOP BANTER PODCAST 🎧
ruclips.net/user/workshopbanter
Also available on Spotify, Apple, Google and most other podcast platforms
🔗 LINKS: 🔗
Website: www.ragnbonebrown.com
Facebook: facebook.com/ragnbonebrown
Instagram: @ragnbonebrown
Twitter: twitter.com/ragnbonebrown
Email: ragnbonebrown@gmail.com
Second RUclips Channel (non woodwork videos): ruclips.net/user/keefykeef
I thought you bought a Domino? Did you decide to sell it?
Not enough depth of cut for this size of gates unfortunately, unless you have the big domino
Always love reclaimed wood projects!
Thank you
A great video once again. One tip I would give is to order an extra fence for the router from their spare parts list, then you can use both fences at the same time, one on either side of the work piece. I know this works on a lot of routers however it is worth checking first that the rods are long enough and if there are holes on both sides of the router base.
Hi Keith
Just out of curiosity, I was wondering which wood filler you used to fill the holes.
Also, if you had to cut the old gates in half to get them to your workshop, how are you going to get them back to your auntie. Great little project and the gates turned out really good.👍
He will cut them in half when finished 😜 😉
Great questions. The filler was just a test mixed one, it said exterior and interior on the tub but realistically I'm not sure how well it will hold up, it'll be interesting to find out. It's somewhat protected by the stain so maybe it'll do ok. Luckily my auntie's neighbour was able to pick up the gates, which saved a lot of hassle, couldn't have got them on my roof rack, so hiring a van was going to be the plan but now sorted
@@RagnBoneBrown Thank you for your reply. Glad you got the gates sorted👍
Nice one, thanks for sharing the nifty design cutting the braces into the centre rail. Much as I'm enjoying my foray into woodwork, I'm not yet very good at conceptualising joinery, so I find explanations like that really helpful... On another note, I see the battery in your drill lat 12'07" looks suspiciously similar to the dimensions of Parkside's 12V, so I wonder... On another another note, shelled out £140 inc. VAT & delivery for 20 decking boards 140 x 28 x 2400 mm from Wickes (I know, I know) last week. Cheers.
Yay the yellow boxers are back!😆. Great video Keith thanks, your explanations are always easily understood.
Nice job! I once tried DIY, I hit my thumb with a hammer, stood in a paint tray, and nearly cut my fingers off with a jigsaw. That was all in a few hours, and that was when I realised it wasn't for me.
Really good, I've used decking timber on some fencing, doesn't look too bad and much cheaper.
i made a huge misrake with "expansion gap" on the claddingf on my shed. it never expanded it shrunk.
I ruined a screwdriver I'd had for yeras taking out rusty screws that had been in some fence wood I was salvaging - using a pair of pliers or a vice grip is a good idea. Good video.
Delighted the yellow shorts got a run out. Not seen them for a while
Pinapple shorts! :D
But no, I actually have a serious question/discussion point. Perhaps an idea for the podcast. When you say that using salvaged materials made for a substantial saving, I guess you haven´t factored in your time spent salvaging/preparing the materials. If you were to "pay yourself" a decent hourly rate for it. Would it still be a substantial saving? I find that kind of hard to belive, even with timber prices as they are now. Of course some types of material are easier to salvage than others. And don´t get me wrong, I all for the environmental aspect for using salvaged materials.
Cheers and thanks for a great video.
That would make for a great topic! I will have a think about it and try and figure it out. Thank you!
Great use of masking tape to illustrate cut locations and direction (5:30). Very effective way to illustrate what you’re explaining.
Cheers
Personally i Use rachet strap to replace long clamps works well.
😁 Thanks Keith. Another great video. I've just received a massive haul of deck boards for a couple of projects so this was a well timed video 😁. Thanks again... wait a minute... where is Mickey ??? 🤣🤣
Great job. Love this type of video 👍🏼
Keith, you taught me some good, practical stuff in this video. I really enjoyed it. Thanks for sharing this video with us.
Thanks
Routers cannot use them for love nor money
Love you video....wondered what camera and editing software you use. Thanks
Thanks. See here for info ruclips.net/video/cOHJaCbmP3Q/видео.html
The gates look very nice in the finished photo Keith, great use of the reclaimed decking. The diagonal braces let into the wood look impressive as well as being stronger. Tony
Cheers Tony
Thanks Keith
Would half lap joints work with gates that are not so large... Say around 2M opening. Or even dowels?
ruclips.net/video/mXRYLFJey7Y/видео.html I used them here..
Great job with salvaged wood.
Someone been watching Gid 🤣
Routing the m&t? Should have got your domino out, would have been much quicker and easier.
Not enough depth of cut for gates this big, hence using the router
Pretty nice work, Keith! The gates look fantastic! 😃
Stay safe there with your family! 🖖😊
Thank you
Loved every second , a Great tutorial
Great video Keith and lots of useful info on the design. Always good to see wood being reclaimed and reused. The links are really useful - too shame there wasn't a link to those shorts.
Nice bit of repurposing again there mate. Good to see you trying to get on with the router. Keep at it. 😉👌
Thank you mate!
Who read it as "Bill Gates" and sighed?
Them yellow shorts again! Gonna have to have a word with Ria about them getting “lost” when she does the washing!! Nice job on the gates though, looking forward to seeing them hung. Stay safe x
Great video again kieth. Been after some gate inspiration as it were for wee while. They look good. Can't wait see the fit and the other upcoming projects 👍🏴
Good points and explaining. 👍
Doin a good job Keith all the best with it, have a nice day Mate !!!.
Cheers Brian
Noooo! Not the wood preservative!!! Don’t do it Keith!!!!! Nooooooooooooooooo……….
🤣 more money down the drain
love a good salvage! 👌🤓
Hall of fame nephew
Good job thanks for sharing....... Now the devil in me was waiting for you to say "after finishing the gates I had to cut them in half to deliver them back to my auntie" 😂😂
Oh by the way, thank you Keith for recommending Ben's channel Hew and Awe.
Haha!!! Thank you
Ok. So I'm gonna have to go back and watch this again. Really nice build. Love the use of the decking boards. Which has inspired something else for me.. I cannot find anyone local to make gates. Live in a council house and there were no gates on the driveway. I looked for years and couldn't find anyone. I don't have the money to get someone to do it now but I'd still like some. Ours would be way smaller than the ones you made. Just for a driveway. Yeah definitely churning ideas with those decking boards now. Defo have to go watch again and pay proper attention. Thank you so much. Have you ever made a screen door? That's a project I want to tackle soon. Really soon with this great weather and two kittens who are only getting vaccinated next week! I'm melting!
Thanks very much. No I've not made a screen door yet
Another great video mate, ive been dreaming up some small gates for part of my garden, and this video has definitely come in handy. Will have to rewatch it closer to our summer here though haha! Cheers
Thanks mate
I'm building gates next week, 2 driveway and 1 side gate, can't say im looking forward to it. But will be half lap joints, are the other gates you made holding up okay?
Yeah half lap gates holding up just fine 👍
Great little video mr and too see you use reclaimed timbers a lot of work stripping down but l think it’s worth it good too see you use the router l love my Milwaukee m18 router but I must admit I have not used the spiral bits l must look into them take care 👍👏👏
Thank you
Nice project, Keith! I made a small shed once using tongue and groove boards, didn't line up as neatly as your boards, haha!
Thank you
Great video.I really like how you are able to build something new out of recycling old timber.The gates are looking really good and the way you think things thru like the bracing of the larger gates as the timber was not long enough is excellent.Look forward to episode 2.Thanks for the link to the wood preserver i deffo need some.As for favours to the wife i think you should clean the oven and do the washing up for a week.lol 👍
Thank you! Not sure about oven cleaning though 😃
Onya Keefy 🎉
Depending on nothing getting in the way if you drop the broad at 2:00 flush to the workbench your have loads more reference surface and you can run your router fence against your vice jaws.
Great idea
Excellent video Keith 👍🏼
Thank you
Very nice joinery there Keith, your auntie will be over the moon with them gates mate 👍🏻👍🏻
Thank you
👍👍👍
Thanks for sharing!
Keep on making.
Lovely old job 👍
Well done man 👏
Thanks
Thank you so much!
Nice project so far. Looking forward to seeing how you go about hanging these gates. I've hung two large gates on two occasions and I have a 'trick' of my own for doing it :) Mind you, it was just two gates, not three . . . . . . . :)
Cheers