Hey guys thanks for all the great content! I just bought a '23 H10 rise and am slightly concerned with the overall life of the battery, and whether or not a replacement will be available down the road. Same with the motor. Any thoughts?
We have no idea about replacement batteries and motors down the road, but ours have over 2,000 miles so far (pretty hard miles) and they’ve been trouble free so far. Our philosophy is to just ride and enjoy the bikes for as long as we can. These modern e bikes are kind of a new frontier and we’ll just have to see what the longevity is.
Question, I have a h15 rise, which I bought exstender but haven't needed to use it , anyway I tried ir the other to see how work but 6 miles in bike turn off , is there a set process how to turn the bike and exstender on.
@ceriway380 We usually have the extender plugged in before we turn on the bike. Make sure the plugs are in Tight. The STEPS computer will recognize the extender and use it first. However two weeks ago we were both having our bike shut off every 10 min. Unplugged the extenders and everything was fine. I attributed it to dirty contacts, since I had sprayed a little silicone on the cable’s locking mechanism before the ride. I cleaned the contacts and the next ride was fine. Long answer, but no special procedure if you start out with it plugged in. I’ve never plugged it in mid ride though.
Hey guys thanks for all the great content! I just bought a '23 H10 rise and am slightly concerned with the overall life of the battery, and whether or not a replacement will be available down the road. Same with the motor. Any thoughts?
We have no idea about replacement batteries and motors down the road, but ours have over 2,000 miles so far (pretty hard miles) and they’ve been trouble free so far. Our philosophy is to just ride and enjoy the bikes for as long as we can. These modern e bikes are kind of a new frontier and we’ll just have to see what the longevity is.
Question, I have a h15 rise, which I bought exstender but haven't needed to use it , anyway I tried ir the other to see how work but 6 miles in bike turn off , is there a set process how to turn the bike and exstender on.
@ceriway380 We usually have the extender plugged in before we turn on the bike. Make sure the plugs are in Tight. The STEPS computer will recognize the extender and use it first. However two weeks ago we were both having our bike shut off every 10 min. Unplugged the extenders and everything was fine. I attributed it to dirty contacts, since I had sprayed a little silicone on the cable’s locking mechanism before the ride. I cleaned the contacts and the next ride was fine.
Long answer, but no special procedure if you start out with it plugged in. I’ve never plugged it in mid ride though.
So you always started with a full charge on the bike , does the exstender show lights when riding the bike . Thank you for replying.
No, the extender is dark when using it.