💥How to repair Nissan Qashai ignition switch. 💥 Key not turning. Reparatie contact.💥 Cum se repara💥
HTML-код
- Опубликовано: 30 сен 2021
- #qashqai #nissan #micra
How to repair Nissan Qashqai ignition switch when the bladed ignition key doesn't turn anymore.
This video is for informational purposes only! We do not assume any responsibility for material damage or damage to personal property as a result of the information contained in this clip. Use this information at your own risk. More VIDEO TUTORIALS
ALL BRAND NAMES, TRADEMARKS AND REGISTERED TRADEMARKS APPEARING ON THIS CHANNEL ARE THE PROPERTY OF THEIR LEGAL OWNERS AND ARE USED FOR DESCRIPTION / ILLUSTRATION / IDENTIFICATION ONLY - Авто/Мото
Great video, thanks getting the pins out definitely the trickiest bit for me, mine was a nissan tino but all nissan models look very similar. Would have sent it away to get repaired but £180. A little excessive for 30 mins work, one tip be very careful drilling pins out
Thank you very much for sharing
😅 Fantastic video worked for me cheers, life saver.
Thanks for sharing
Just what i needed, and worked fine for me. Thanks.
Thank you for sharing 👍
Thank you.
Good job!
Thanks man
Excellent job thanks 👌
Thank you very much for your comment
When opening the steering column cover screws, theirs like a silver coin also in the middle what’s that for
Thank you
Very quickly done ….I usually remove the damaged float and don’t put one back in and cut new blade .I have never had a recall from doing this
Yes thats works fine as well. Thank you very much for your comment 👌
hi if you don't mind me asking what do you mean by the float? is this the part he replaced in the vid if so then are you saying it doesn't need to be there? only asking as mine is broke key sticking in the ignition but can not find anywhere selling that small part
@@robc882 that’s the problem
Why do you need a new key in the case that you don’t put one back in?
Does this really work without the dusk cover thing that worn out? Would be amazing. I removed one but after 6 months already worn out again..
How do find the name floater or the piece that is broken in obey or amazon for a nissan sentra 2028 switch?
Hey great video!!
Can I ask what size drill bit did you use to get the small pins out?
And how deep did you drill in them?
I can't remember. Is a bit bigger than the pin or same size
hi, what are the small pins that you drill out? I need to replace them but not sure what the part is called? Can I fill around them with some soldered metal?
You don't need to replace them, if you use a small enough drill, and pull them out, as shown, they go straight back in. You can fill the centre with any mailable metal like lead if you wish. Saves having to buy a tiny piece of metal to the width of your drill bit!
£275 including call out fee round my ends. They rebuild the thing. Not to even replace it.😢
Hello Sebastian.
Thank you for this video. Together with some other video's it enabled me to fix the lock of my Nissan.
However, around 2:30 I see that you put the new lever in upside down! How did you manage to get the steering lock working this way?
I can't remember. Maybe I changed it afterwards... :)
How much does this job cost you?
What do you mean? How much is to do the repair?
@@sebastianthelocksmithandre1600 yes
220£
@@sebastianthelocksmithandre1600 220£==$?
300 $