Volvo S40 V50 isofix mount - Easy

Isofix mount Volvo S40II V50 2004 -

[@remedypit]

Thank You All for all those likes 👍🏻and subscriptions. I am glad to see that this video helped so many people. 🤝👏🏻

[@Jacpaepae]

Thanks for this, would'nt have made it without you.

[@somasamtab8560]

The original bolt is M10x1,5 , length is 25 mm, head is hex 13 mm, quality 8,8. There is a room for longer bolt, max. 55-60 mm. If you don't have bolt, you can buy two according these parameters, but the head size will be 15 (if hex flange bolt) and 17 mm if normal hex head. This is not problem. And you also need two wood construction washer.

[@remedypit]

@@somasamtab8560 thank you for your advice ! Have a great day ! 🙂

[@lnesland]

Nice job. Thanks for sharing. I need to do the same to my Volvo V50.

[@dakysrb]

Thank you! I proved to my wife that we don't need to change car 😂 i love my Volvo so much and i don't want to change it to the new plastic one.

[@remedypit]

Yeah ! I still drive the same car - now almost 20 years old volvo s40 - now with two isofix 👨‍👩‍👦‍👦 😂 regards

[@janew1418]

Much appreciated, exactly what I needed to see! 🙏

[@4li5t4ir]

Thanks for the video, helped a lot!

[@TheKimpaboy]

Thank you very much, helped me out alot!

[@remedypit]

No problem !

[@rikke4550]

Very useful video... Thanks a lot👍

[@thijsdevoogd6002]

Thanks just what I need.

[@Baaja1990]

Thank you very much, you helped me a lot 💪

[@watchitburn]

Thanks man - that helps a lot!

[@remedypit]

Rene Messner No problem. Volvo manual is unclear in this particular case.

[@edsamazing]

Thanks for this!

[@MaverickQbiak]

Legend, thanks!

[@robertsoek4176]

Super, dzięki

[@KorabShala]

Thank you, it helped a lot. I have a volvo V50 2010 and I am about to install the second isofix and I was wondering what is the process for that? Same as this one where I proceed with unscrewing the 2seated part? Also is there a slot for the second isofix to be begin there? Thank you again!

[@remedypit]

Nice to hear that. Yeah it is similar procedure and it should be slot for second isofix also. Regards

[@mart12345677]

Thanx great help

[@arypma]

thank you! very helpfull

[@KrzysztofSilesia]

Witam.
Czy można wiedzie jaki fotelik zamontowałeś w swoim samochodzie? Ja także zamontowałem isofixa do swojego S40 2004r. Nosidełko spasowało prawie idealnie, natomiast fotelik już żaden...
Dzisiaj byłem na doborze fotelika i maksymalnie co uzyskaliśmy to kąt 30 stopni, czyli o wiele za mało. Wszystkie foteliki stały wręcz pionowo.
Pozdrawiam.

[@remedypit]

Witaj,
Na razie jesteśmy na etapie Cybex Gold ATON M z bazą M I-SIZE, tutaj kąty są odpowiednie. W przyszłości do tej bazy będzie pasował fotelik SIRONA M2 I-SIZE ale nie przymierzaliśmy go jeszcze do auta.
Pozdrawiam

[@mkg3978]

Great 👍

[@nemocap2958]

Thanks!What about other side?Same procedure?

[@remedypit]

Nemo Cap Yes

[@Oxytard]

Thanks alot!

[@simonmagnusson6216]

Thanks!

[@moravacso]

Where to buy this isofix? Thanks

[@remedypit]

Hi, ebay or something like that, depending on country where you live.
For example:
www.ebay.co.uk/itm/GENUINE-VOLVO-ISOFIX-BRACKET-FOR-CHILD-SEAT-V50-C30-S40-C70-8639658-31439072-/223730790151

[@e.bergstrom]

Hi how did You get the measurements? And can you be specific please. I have a Volvo v50 2004 and have both the isofix part but I’m wondering how I’m going to place it I would be very thankful...

[@remedypit]

Hi, all you need is the isofix part with screws, V50 mount is the same like S40 II (my is 2005). Check out this manual: www.volvopartshop.com/ekmps/shops/tmsvolvo/resources/Other/fitting-instructions-31439072.pdf

[@javieradelgadosoto2313]

and where is the top tether??? thanks!

[@remedypit]

What do you mean by tether, could you please describe it in other way ?

[@mentorpl]

Cześć, akurat interesuję się tematem i top tether to jest jeszcze jakieś inne mocowanie fotelika poza pasami i isofixem. Albo po prostu jakiś dodatkowy pas, nie wiem.