the worn coin Gary on 13:47 is a french 5 or 10 centimes of napoleon iii france. love watching your videos. i love being taught from your adventures as a newbie to metal detecting......
Hi Gary, I found a solid silver 1600s button with a rose pattern on with your Tekkna program last week, it's been classed a treasure, under the treasure act. It was a good 10 inches down. Great find, cheers John
Great video Gary, I’ve gone over some of my colonial spots here in Connecticut with continued success using the Tekkna . Thank you for introducing us to this program. Have a great Easter !
Hi Gary. Greetings from germany. I love Tekkna. Got my first coins with it. I had a pretty small roman in the same hole within a nail. I have a field with i run over and over and i dont had the chance to try Tekkna there, but i will in the next few weeks an give you a feedback after.
That's great thanks Gary 🙏 Tekkna now firmly in my weaponry, (I'm switching between 3 progs. atm). - Successfully pulled an Eddie i Penny at > 8" (pasture) last Sat, and Tekkna saw that no problem!... Brilliant stuff Gaz - thanks for all the help Sensei... 😂 Bobby 🐭
Thanks Gary, the fields I detect in have a lot of big iron objects, the Deus seems to give these a high target ID, I'm starting to take notice of the sound more than the numbers which helps, thanks for the advice
Here in Cornwall little pasture field what said about before little lizzy silver sixpence copper coins found with program just reactivity 1.5 sens up to 98 been working very well . Cheers Gary
Great Video once again Gary. I’ve been using the Tekkna program over the past month and I love it. We don’t get the Roman’s you get in the UK but the program really works well on some of the older coins I’ve been looking for over here in Canada. Cheers James M,
Gary, I’m still waiting for the doctor to release me since my rotator cuff surgery. But I’m chomping at the bit to try your program. I have a field where I got a $5 gold piece but everything is deep. It should be a good test… John
Hello from the USA! Great video, Gary. Tekkna worked for me at an old demolished homesite. I found coins and relics in a sea of house debris. Did Remy have his “Roman cqndle moments” after consuming all the rotted turnips in the last episode? 😎
Your videos are always useful Gary, thank you. One question - I notice you frequency scan but you never seem to ground balance. Is there no longer a need for ground balancing on the Deus 2?
@@The-skillschool I always wondered - when I ground balance here in the South West, the figure usually drops from 87 to 73 - and that's on low mineralisation. Maybe I'm making a mistake, and this is possibly a reason why my depth (until Tekkna) has been lacking.
@@richardtarr2745 Same thing for me.. I asked the question to xp here is their answer.. Do not confuse the mineralization bar and the mineralization index. The mineralization index corresponds to the nature of the soil, so it is a value that tells you the "signature" of the soil. The mineralization bar on its side shows you the strength of this signature: the more it will rise and fill, the more mineralized your soil will be and therefore the more difficult you will find it to detect in depth because it creates a kind of mask that is difficult to cross (some talk about more or less dense fog). Keeping this in mind, you will therefore understand that your soil is a soil whose signature is present (it is not non-mineralized sand) but that its mineralization force is very low! Lucky that you are :) Conclusion: Make your GRAB at each exit as you have usually done visibly and enjoy your floor conducive to detection! It is advisable to stay at the default ground value on soils with little or no mineralized with our single-frequency devices because otherwise, you will generate the inconveniences you have mentioned (disruptions, ground sounds, audible disk shocks etc...). Conversely, on the multi-frequency programs of the Déus Il, the STAB SOL function makes it possible to strongly mitigate these famous disadvantages, so it is advisable to always do a GRAB in order to improve certain internal parameters of the device. Here you are, you know Everything (Désolé pour la traduction approximative 😐)
Hi Gary, very helpful video, are you using the 9" coil? I have a lot of problems identifying targets in iron laden sites with the bigger coils, do you think a smaller coil would make it easier? cheers Ash
Just look at the depth of those targets and in soggy wet ground, some would expect you to use "General" as it has Conductive Soil Subtraction. You've nanaged to create a beast out of the Deus 11 FT program. It's Witch Craft I tell you. 👍
Hi Gary, at the start when you reduced the reactivity to 0 then moved back up to 2.5., could expand on what you were wanting to hear or not hear from the machine as you increased the reactivity please?
Sure, on lower reactivity settings the machine sounded off on every sweep, with long lazy sounds. Raising the reactivity eliminated these false signals.
Hi Gary ive been using this program on the beach where there's lot's of iron and it works extremely well. Lets see what your tweaks are for Tekkan beach😎
@@The-skillschool Hi Gary...the suspense regarding the beach tweaks is killing me LOL...can't wait a few weeks for the videos - is there any chance you can post those simple tweaks??? Please...pretty please....Happy Easter.
Lovely Pasture Treasure hunt. You have such stunning landscapes there in the u.k. Gary. I know this deep signals with TEKKNA and had a lot of this gone signals at my last hunt. I guess it s cause of removing the soil because the air isnt conductive as the soil is. Because of that airtests are just useless in my opinion. Cheers mate, thanks for sharing.
Hi Gary I really enjoy your videos thank you so much. Can I add the program you’re using if I have the 2.0 update or do I need to go back to the 1.10 version
Gary how do I get a XP hoody like you have? I was out with the Tekkna program doing some testing, was finding very small targets so in my book it works. Question do you think if I use PWM instead of high square I will be missing any thing? I tap my pin pointer on my ring also. Thanks for sharing and teaching me something new about the machine.
Hello Gary, I love the tekkna program, just a small question, the tekkna has a three-way responsiveness, should we leave it to three or can we take it down on some fields to gain in depth? I would like you to explain to me please. 🙏
Hello sir Even though you are using a small coil, you found a target with a depth of 14 inches and good target sound Could you tell me, sir, what program you used and the settings you used in this video? Thank you for your interest
What’s this thing with the pinpoint? Why’s it good if the signal disappears? On my Legend I used to use the Pinpoint purely to locate the target, the signal would never disappear…new DeusII user and new subscriber.
@@The-skillschool I was wondering why you said the pinpoint method test was a good sign and suggested a positive target. It sounded like you thought it was telling you a bit more than just what re it was, but he number of presses to make the target disappear seemed significant?
i found another vid of yours where you explain - the more presses of the pinpoint button the deeper the target. Cheers, only just got a d2 so at the start of a pretty steep learning curve after a vanquish. your vids are a great help
I got a deus one for Christmas, due to weather i didnt get to take it out till last week, in a park field i hit a dozen times with my nokta legend, the deus one witht the x35 9in coil i got three rings, two sterling one tungsten carbide wedding band, and a piece of juno jewelry awesome first hunt with the deus My elliptical coil just came today, im probably going to mainly use it, main reason why i bought the deus instead of the deus 2 is for the elliptical coil Theres a rumor that XP might release a new machine that can share coils with the Deus 2 like the ORX did with the deus, if it turns out to be true i think that will be a good idea, but if its true i hope it has more tone options than the orx did
used it yesterday and it tells you when to dig even in with the iron next to it found 2x cut half and a cut quarter with lot of other goodies ,yet to find any thing at depth
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
the worn coin Gary on 13:47 is a french 5 or 10 centimes of napoleon iii france. love watching your videos. i love being taught from your adventures as a newbie to metal detecting......
Great info, thanks for your help.
Hi Gary, I found a solid silver 1600s button with a rose pattern on with your Tekkna program last week, it's been classed a treasure, under the treasure act. It was a good 10 inches down. Great find, cheers John
Great job thanks John
Great video Gary, I’ve gone over some of my colonial spots here in Connecticut with continued success using the Tekkna . Thank you for introducing us to this program. Have a great Easter !
Thanks for your support Jo Jo
@@The-skillschool lütfen program bilgisini alablirmiyim
got to love them deep targets.! gets your heart pumping and the anticipation of maybe finding a gold coin or another valuable
artifact. cheers!!!!!!!
Thanks Robert, the more you dig, the better the chances.
Hi Gary. Greetings from germany. I love Tekkna. Got my first coins with it. I had a pretty small roman in the same hole within a nail. I have a field with i run over and over and i dont had the chance to try Tekkna there, but i will in the next few weeks an give you a feedback after.
Thank you 👍🤝
That's great thanks Gary 🙏 Tekkna now firmly in my weaponry, (I'm switching between 3 progs. atm). - Successfully pulled an Eddie i Penny at > 8" (pasture) last Sat, and Tekkna saw that no problem!... Brilliant stuff Gaz - thanks for all the help Sensei... 😂 Bobby 🐭
Thanks Bobby 🤝
Thanks Gary, the fields I detect in have a lot of big iron objects, the Deus seems to give these a high target ID, I'm starting to take notice of the sound more than the numbers which helps, thanks for the advice
Glad to hear you are working it out
Used this program today and found 2 Roman coins one was a Roman Minim @6” deep. It worked great thanks Gary
Great feedback, thanks David, congratulations on the Minim, they are tough critters to find 👍
Here in Cornwall little pasture field what said about before little lizzy silver sixpence copper coins found with program just reactivity 1.5 sens up to 98 been working very well . Cheers Gary
Nice one Bobby
Great video Gary,
thanks for sharing.
It was very intesting us usual.
See you soon.
Thank you
Deep targets great finds nice hunt. Thanks for posting.
Thanks Fred 🤝
Супер!
Вы обещали видео про морской пляж, когда оно появится?
In a few weeks
Great video Gary.
Thanks Greg 🤝
Perfect Gary Tekkna is perfect… thank you so much. I have This program for meadows and fields. 👍👍👍
Thanks Peter 👍👍
Banada biri bu program hangisi yazar mı versiyon 2.0
Great Video once again Gary. I’ve been using the Tekkna program over the past month and I love it. We don’t get the Roman’s you get in the UK but the program really works well on some of the older coins I’ve been looking for over here in Canada.
Cheers
James M,
Thanks for sharing James, it's good to know that you are getting results.
👍 always good to see you!
Thanks again!
Ahoj Gary,super video,Tekkna je super program v České Republice pracuje na 100%
That's good to hear, thanks for your feedback.
Gary, I’m still waiting for the doctor to release me since my rotator cuff surgery. But I’m chomping at the bit to try your program. I have a field where I got a $5 gold piece but everything is deep. It should be a good test… John
Shoulder injuries are a nightmare John.
Same problem but no surgery.
Get well soon.🤝
@@The-skillschoolThank you Gary I hope it is as good as the last one. I miss detecting.
For tour knees. Mix honey and lots of cinnamon and take a teaspoon twice a day. In 4 days it will make a difference. Cheers
I will try that thanks
That land looks familiar, is there a vineyard on that farm ? 😊👍
Hmmmm can't say 😁
Hello from the USA! Great video, Gary. Tekkna worked for me at an old demolished homesite. I found coins and relics in a sea of house debris. Did Remy have his “Roman cqndle moments” after consuming all the rotted turnips in the last episode? 😎
Glad you like it, Rem is doing OK.
He had his own turnips removed this week.
@@The-skillschool 😢
Your videos are always useful Gary, thank you. One question - I notice you frequency scan but you never seem to ground balance. Is there no longer a need for ground balancing on the Deus 2?
I don't ground balance Richard.
especially here in the UK. The only time I would do this is on mineralised ground.
@@The-skillschool I always wondered - when I ground balance here in the South West, the figure usually drops from 87 to 73 - and that's on low mineralisation. Maybe I'm making a mistake, and this is possibly a reason why my depth (until Tekkna) has been lacking.
I wouldn't say you will lose depth, you will just make the machine unstable with an incorrect GB.
Watch the mineralisation bar when you sweep.
@@richardtarr2745 Same thing for me.. I asked the question to xp here is their answer..
Do not confuse the mineralization bar and the mineralization index. The mineralization index corresponds to the nature of the soil, so it is a value that tells you the "signature" of the soil.
The mineralization bar on its side shows you the strength of this signature: the more it will rise and fill, the more mineralized your soil will be and therefore the more difficult you will find it to detect in depth because it creates a kind of mask that is difficult to cross (some talk about more or less dense fog).
Keeping this in mind, you will therefore understand that your soil is a soil whose signature is present (it is not non-mineralized sand) but that its mineralization force is very low! Lucky that you are :)
Conclusion: Make your GRAB at each exit as you have usually done visibly and enjoy your floor conducive to detection!
It is advisable to stay at the default ground value on soils with little or no mineralized with our single-frequency devices because otherwise, you will generate the inconveniences you have mentioned (disruptions, ground sounds, audible disk shocks etc...). Conversely, on the multi-frequency programs of the Déus Il, the STAB SOL function makes it possible to strongly mitigate these famous disadvantages, so it is advisable to always do a GRAB in order to improve certain internal parameters of the device.
Here you are, you know
Everything
(Désolé pour la traduction approximative 😐)
Awesome video Gary! What update version do i need to install it in my D2? Thanks
Thanks Joseph, all explained in the Tekkna 2 video.
Version 1.1 or 2.0
@@The-skillschool Ok great thanks
gary, where did you get your black hoodie with the xp logo on your arm ??
From Hayling Detect
thanks gary
Hi Gary, very helpful video, are you using the 9" coil? I have a lot of problems identifying targets in iron laden sites with the bigger coils, do you think a smaller coil would make it easier? cheers Ash
@@ashleyod1346 yes a smaller coil may help if the iron is small. Bigger iron will confuse a smaller coil.
Usually a faster recovery speed will help.
Just look at the depth of those targets and in soggy wet ground, some would expect you to use "General" as it has Conductive Soil Subtraction. You've nanaged to create a beast out of the Deus 11 FT program. It's Witch Craft I tell you. 👍
Sure is Paul, even at Freq max 40.
Thanks for watching.
no problem detecting under power lines with deus 2 ! rest of detectors are struggles there !👌🏻
That's good to hear 👍
Hi Gary, at the start when you reduced the reactivity to 0 then moved back up to 2.5., could expand on what you were wanting to hear or not hear from the machine as you increased the reactivity please?
Sure, on lower reactivity settings the machine sounded off on every sweep, with long lazy sounds.
Raising the reactivity eliminated these false signals.
@@The-skillschool ok thanks
Hi Gary ive been using this program on the beach where there's lot's of iron and it works extremely well.
Lets see what your tweaks are for Tekkan beach😎
Simple tweaks, they can be done in seconds.
Glad it is working for you. 👍
@@The-skillschool Hi Gary...the suspense regarding the beach tweaks is killing me LOL...can't wait a few weeks for the videos - is there any chance you can post those simple tweaks??? Please...pretty please....Happy Easter.
Lovely Pasture Treasure hunt. You have such stunning landscapes there in the u.k. Gary. I know this deep signals with TEKKNA and had a lot of this gone signals at my last hunt. I guess it s cause of removing the soil because the air isnt conductive as the soil is. Because of that airtests are just useless in my opinion.
Cheers mate, thanks for sharing.
Thanks for your thoughts, great info sir 👍🤝
Hi Gary I really enjoy your videos thank you so much. Can I add the program you’re using if I have the 2.0 update or do I need to go back to the 1.10 version
Thanks, did you watch last week's video.
All was explained in that one.
@@The-skillschool I believe I did not sure how do I rewatch it
Gary how do I get a XP hoody like you have? I was out with the Tekkna program doing some testing, was finding very small targets so in my book it works. Question do you think if I use PWM instead of high square I will be missing any thing? I tap my pin pointer on my ring also. Thanks for sharing and teaching me something new about the machine.
Hi DDS firstly the hoodie is a Hayling detect one.
Regarding PWM, it's worth a try.
Hello Gary, I love the tekkna program, just a small question, the tekkna has a three-way responsiveness, should we leave it to three or can we take it down on some fields to gain in depth? I would like you to explain to me please. 🙏
100% if you are on a quiet piece of land, lower the reactivity.
Try 2.5 to start with.
@@The-skillschool Thank you master🫡
Hello sir
Even though you are using a small coil, you found a target with a depth of 14 inches and good target sound
Could you tell me, sir, what program you used and the settings you used in this video?
Thank you for your interest
@@ابووله-ج5ف Thank you, I can't remember what program, perhaps I mention it on the video.
What’s this thing with the pinpoint? Why’s it good if the signal disappears? On my Legend I used to use the Pinpoint purely to locate the target, the signal would never disappear…new DeusII user and new subscriber.
You can guage the depth, when the target disappears when you second press the pin point.
Thanks for the sub 👍
Hi Gary, what is that pinpoint method exactly you refer to? What are you doing and what does it tell you? (3 presses to clear etc)
Each time you press the PP it shrinks the target
@@The-skillschool I was wondering why you said the pinpoint method test was a good sign and suggested a positive target. It sounded like you thought it was telling you a bit more than just what re it was, but he number of presses to make the target disappear seemed significant?
i found another vid of yours where you explain - the more presses of the pinpoint button the deeper the target. Cheers, only just got a d2 so at the start of a pretty steep learning curve after a vanquish. your vids are a great help
Nice and deep Gary in that wet grass...
Thanks Albert
Hi Gary,
What’s this Pinpointer trick you’re using?
It goes quiet when you switch it off?
Thanks
Watch my earlier video Steve
Hello Gary, does this program work in dry soil?
Just adjust your reactivity on the day
Thanks, super!!!!
Thank you
Hi Gary in the tekkna program would it be ok to use a notch to cut the coke out say 23-24? Or would it notch small gold and cut qrts out?
Cheers Wayne
Sure can Wayne, personally I like to hear it.
Спасибо за программу, а какой грунт баланс у вас и значение стабильности грунта?
All factory default
I got a deus one for Christmas, due to weather i didnt get to take it out till last week, in a park field i hit a dozen times with my nokta legend, the deus one witht the x35 9in coil i got three rings, two sterling one tungsten carbide wedding band, and a piece of juno jewelry awesome first hunt with the deus
My elliptical coil just came today, im probably going to mainly use it, main reason why i bought the deus instead of the deus 2 is for the elliptical coil
Theres a rumor that XP might release a new machine that can share coils with the Deus 2 like the ORX did with the deus, if it turns out to be true i think that will be a good idea, but if its true i hope it has more tone options than the orx did
Thanks for your thoughts.
What was that studio pinpoint trick you did? Am I missing the joke or is there something useful here that I'm missing?
@@philllandry4957 l have videos on pin pointing
Nice tutorial thnx
You are welcome
used it yesterday and it tells you when to dig even in with the iron next to it found 2x cut half and a cut quarter with lot of other goodies ,yet to find any thing at depth
Well done sir, thanks for the feedback.
Sorry if asked previously. Is this a 9" or 11" coil?
9" coil
@@The-skillschool Sweet. I use the same. TY for a reply.
13:50 Napoleon III, some kind of Centimes
Thank you
Love the Indian hat 👍👍
Thanks buddy 🤝
Do you not use XY now Gary?
Not on the Deus 2
Will it work on Deus II Master Gary?
Yes I have a video on the master set up.
Very thankful that I try the metal detector if you gave me
Hmmmm
can you do video putting this into ws6 thanks
Check his video list - he has one...
Thanks
Likes bro 👊👍
Thank you
...would XP Xtreme Hunter + pinpointer not be better than Deus 2 + pinpointer?
Depends what you are looking for.
@@The-skillschool what is XP Xtreme Hunter good at and what is Deus 2 good at then?
I have videos on this subject
interesting. I just cant get mine to go that deep no matter what I do.
Different soils I guess
👍👍
Thank you
Looks like the tekna program is a young mans program 😂😂😂😂😂😊
I hear you Russ 😀
Envoye moi une dedector deus2 cadau😊
Sure, send me £1500 euros
We cannot going deeper than 30-35 cm. Actually we can, but all machines on the market are banned to this depth!
It depends on the target size and ground conditions.
#xpxtrem