You want a fat kick sound!?! EVANS EMAD & GMAD!
HTML-код
- Опубликовано: 7 авг 2024
- Today I swap out my Coated EMAD head for a new Clear GMAD. I'm hoping for just a bit more attack and punch with this swap out. The EVANS EMAD/GMAD is a standard go to bass drum head for me! I have them on basically every kit I own! (That's a lot of kits!) I also walk you through how I personally tune my kicks. I love a thick punchy slap sound and for me, this achieves that goal! So follow along as we explore the sounds of the EMAD vs the GMAD bass drum head on my PDP Classic Concept Maple drum set with a 22" kick.
I am a proud Endorser of Sabian Cymbals! Check them out at: www.sabian.com
I also use AVA Snare drums: www.AVAdrums.com
Kit: PDP Classic Concept Maple
Snare: AVA Step Stave Walnut/Maple 14x7
Hardware: DW 9000 Pedals, DW3000 Stands
Cymbals: Sabian AAX X-Plosions Crashes, AAX Medium hihats, AA Bash Ride
Sticks: VicFirth
Mics: Digital Reference
Interface: Behringer XR18
Edited: Garageband, iMovie
Cameras: Nikon D3200
Spaz Approved
Instagram @ SpazDrums
0:00 Introduction
1:45 Coated EMAD Sound Samples
4:08 Swapping Heads EMAD to GMAD
5:30 How I Tune my Bass Drum
7:35 Clear GMAD Sound Samples
9:30 Back to Back EMAD vs GMAD
10:25 Final Thoughts / Playing Видеоклипы
Emad. It's warmer and less plastic sounding which I prefer.
The purpose of “breaking it in” is to set the head and make sure it’s connected to the bearing edges properly. Good test. I play the EMAD as well
That coated emad sounds really nice and warm.
Awesome video. And I love the Yay sound effect
hahaha thanks :)
Wooww! The Gmad is perfect!
yeah it's my absolute go to! Great drum head !
Which beaters are those, gentlemen? I'm kinda impressed right here
I never trigger, and for me it's a science to get a clicky sound from the drums acoustically, and then proccess it (which less and less people are doing today). As a matter of fact, even the people who go honest about acoustic drums w/ no sample are taking the easy path of the "no reso head + coin in the beater" formula. By the way this beater sounds way better than the wooden ones I've seen
Respect for this kind of tone you got accoustically like a real man, bro! That's how it's done...
besides, a comprehensive walkthrough - you're sharing your best knowledge for free. Worth a billion likes and followers indeed...
Stay awesome! Cheers from Brazil
Thanks man! That's super awesome and I greatly appreciate the comment and compliments. And I agree with you 100%. I don't want any gimmicks or tricks. I'm using the DW Sound Control Beaters. I did a review on them. They are my favorite beater for sure. Three different heads to choose from, 5 different weights to choose from and self adjustable! You can find the link here if you want to check them out!
ruclips.net/video/gRBKj9Bx5Zw/видео.html
Emad for me. I heard they released an emad 56' calftone. I cant wait to try it out with my 20" Vintage Maxwin by Pearl. I estimate by what I've seen on the internet that its a late 70s Made in Taiwan. I havent played it yet. Still waiting for the calftones to arrive. Probably gonna go with eq4 calftones on reso.
Interesting! I hadn't heard that yet, I'll have to check it out!
@@ZackZweifel I can't wait for mine to arrive. Im a total drumhead nerd. I love trying new gear, new tunings, new cymbals.. etc.... I get bored easily and need changes often.
So my 8pc double bass kit becomes a 4pc bop kit sometimes.
My favorite kit right now is a tiny set for toddlers. I repainted them and put diplomats on them. They sound killer. Perfect for porch fests.
The Clear Head is Top 👍🏼 Thank You
It really is! I'd take that over anything any day!
That’s one way to end a video 🤘🏼
hahaha thanks! \m/ Thanks for watching!
I've used both, and I prefer the GMAD. Both sound great!
They're both great and both serve their purpose awesome! Thanks for watching!
EMAD sounds much better IMO. EMAD is much less clicky... seems to have more punch. Maybe if I were in a Metallica cover band, that GMAD would be perfect. I am wondering about that tuning vs the way I tune. I press dead center removing the wrinkles, then back it off a hair. I am currently using the Aquarian SKII... might have to try the EMAD next along with your tuning. Good video.
I used to do the wrinkle tuning also, actually.
EMAD for me. Thanks for shairng.
Thanks for watching!
Evans is great
EMAD just sounds much better to me and yes GMAD does have that plastic sound at impact. May need to tighten more??
Yeah tightening would change a lot.. I use a very loose tuning method as shown lol 😆
The GMAD seemed like it had more attack. But it was hard to tell because there was so much time on the tape that separated the 2 heads.
Thanks for watching and thanks for the feedback! On my next comparison video I'll keep the transitions shorter so the sound comparisons are closer. Appreciated!
I hear more definition and attack with the non-coated head which I prefer. Enjoy this little contribution towards drumsticks!
oh man!! I didn't even realize you could do that~! My first ever contribution! Thank you so so much! I will gladly enjoy that and put it towards sticks! We have a show next weekend I was going to pick some up this week! :) Thank you so so much!
GMAD for me.. More bass in the stroke I think.
I love that the clear emad still lets the kick resonate and boom, but I wanted something more durable and got the heavyweight and hated how choked and dry it makes the kick. Is the Gmad a good in between?
yeah it basically goes like this: EMAD Single ply 10mm, GMAD Single ply 12, EMAD2 Two ply 10mm. So the GMAD is in-between the EMAD and EMAD2
GMAD for sure I'm a metalhead though
\m/ hells yes!
How tight do you have your bass reso? I’ve definitely had my heads much tighter than yours for years but I’d like to try this setup.
The reso I do hand tight like the batter but then I give it a little more tension. This for me helps still give it some tone. I basically take the key and once it starts getting some pressure I stop turning the key. Hopefully that makes sense
GMAD head is better great job on the video
Definitely happy with the swap! Wait till you hear the next video I just recorded today! oh man!
why use mads with dampening inside the bass drum? also cant really compare used coated apples to new clear oranges. of course clear sounds better.🍻
You know.. I've taken out the pillow and still just like it a hair more with even more dampening. Style preference I guess? I know they aren't apples to apples comparison but thought I would still let people hear the difference since I could.
Bass drum mic gain was turned up too high that the sound had a popping echo sound. Also I couldn’t hear the difference cause that the first time the sound a video was coming from the batter view side and then you switch to sound the front resonant head side for the 2nd bass drum head.
Sorry about that! I appreciate the feedback and I will keep this in mind for future videos! Greatly appreciate the honestly.
GMAD for me
Gmad!!!!!!!
This video make me buy the Gmad 🙈🙈🙈🙈
Can't go wrong! haha nice!
There is a face in the coatedhead
I prefer the emad sound actually.
Yeah me too!
Emad sounds like asshole
Can you make a video without the mics so you can hear the head without them?
So you want to hear just the camera mic? I'm not 100% sure what you are asking
@@ZackZweifel , yes just the camera mic
@@ZackZweifel , btw gonna go for the gmad too, sounds cool
White head sounds more full
Are all those drums yours.....
Yes they are. I have 11 kits Currently. Just sold a couple
@@ZackZweifel nice bro 👍
looking at half a million dollars😂 🍻
nice man - but maybe in between?