My Favorite DJI RS3 Pro Build
HTML-код
- Опубликовано: 9 апр 2023
- A breakdown of my favorite build for the DJI RS3 Pro, using the BMPCC 6K Pro and Sigma 18-35mm.
Product Links:
Titla Battery Handle Base Accessory Mounting Bracket:
tilta.com/shop/battery-handle...
SmallRig Dual Handgrip for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro 3027:
www.smallrig.com/smallrig-dua...
Tilta NATO Rail Extender Arm for Rear Operating Handle:
tilta.com/shop/nato-rail-exte...
Tilta Rear Operating Handle for DJI Ronin:
tilta.com/shop/rear-operating...
SmallRig Adjustable EVF Mount with NATO Clamp MD3507:
www.smallrig.com/smallrig-adj...
Ninja V Monitor:
www.atomos.com/products/ninja-v
NITZE MOUNTING PLATES KIT FOR NINJA V 5” MONITOR - NINJA V-MPKIT:
nitze.hk/index.php?route=produ...
Titla Left Side NATO Rail to Rosette Adapter:
tilta.com/shop/left-side-nato...
TiltaRosette Extender Arm
tilta.com/shop/rosette-extend...
Connect with me on Instagram:
/ instaianwebb
#djirs3pro #djironin #bmpcc6kpro
You are a natural teacher. Great teaching, demonstrations, and explanations. 🎉
Nine minutes of a great understandable Custom Rig Build . Bravo
Thank you Mark!
Glad it was helpful! Thanks for watching.
For some reason out of all different setups I’ve seen, this one makes the more sense to me. I have tried so many ways and always end up with just the camera in the the gimbal and that’s it. Even yesterday decided to tried mounting the Ninja V on center back and end up dropping my gimbal and damaging it. I was able to fix it, but it was unfortunate. I might do try again with once my mind cleared up the catastrophic failure. lol great video by the way. Thanks for sharing
Glad I could help! Sorry to hear about the drop, I've been there before.
nice build, thanks for sharing
Great video!
Thanks for watching!
Wowwwww !!!!!
This kind of DJI RS 3 rig up Im waiting for
Thank you very much
Thanks for watching!
Love the rancid poster, the videos good too 😄
wow!incredible ! 👐
Thanks for watching!
Love the setup! Ive just ordered this gimbal and the Ninja V! I like that you've placed the raven eye unit on the back of the monitor 😎
Thanks! Best of luck with your build. Thanks for watching!
Duuude. running the raveneye on the monitor was genius, had never seen it rigged like that
Thanks! Happy to help.
I like the setup...thanks for sharing!
You bet
Real interested on that hdmi cable. Super thin!
So... Love the all the parts and gizmos that attach making this thing a beast.. but, would have been nice to see you USE IT :)
Amazing…what an efficient rig, thank you! Looks like I better hit the gym before carrying that around 😊
Thanks for watching! It's definitely heavy, but worth the weight.
nice !!!
Thanks!
Exactly what I was looking for. Thank you for that great useful video!
You're welcome!
Nice! Missing link is seeing you in the field to see how you operate. Curious to see your shooting style to see if it's similar to mine. The build you have is similar to the one I'm thinking about building.. just don't have that hands on exp. yet.
Great Video, what was the additional cost of the full set up after the RS3? Thanks.
How secure is that Tilta 15mm LWS Baseplate Type VI? I mean how is itnsecuring the BMPCC 6K Pro Tilta Cage? Is it just a lever lock at the back of the baseplate or is there a some sort of stop mechanism that prevents the cage from sliding off the gimbal completely when the baseplate lever fails?
Great video! Is there a reason you didn't go with the DJI accessories?
Very helpful video, thank you. The whole rig build ends up costing similar to the RS3 pro. I guess if you want something workable you gonna have to pay for it. Your video saved me a lot of research time. Why not use another wireless control handle instead of the Tilta Rear Operating Handle for the rare/low handle? How often do you need to pull focus when operating on low angle? Do you find the right hand controls are enough? Thanks a lot.
You could use a wireless control handle. I typically don't need to pull focus too much when in low-mode, but it could be an excellent addition.
So glad I stumbled into this video. I love the setup, and I've ordered most of the parts. One question, if you don't mind, I'm wondering why you chose to use the Tilta rear extended arm instead of using the one that came with the DJI RS3 pro gimbal.
Thanks for watching. Sorry for the late reply. The Tilta extended arm gives you another Nato rail mounting point, which allows me to mount the monitor holder. The DJI version doesn't include this.
Thank you for your response,. That was actually explained in the video, I think. It is a great set up, especially the left wooden handle.
Amazing build... And how you connect a battery charger for your camera??... Do you use a VMount battery or just the battery it's come with the camera?
Thanks for watching. I do sometimes add an NP-F plate on top of the camera and add an additional NP-F550. The ones sold by Blackmagic are the best ones, they last quite along time. Thanks again for your comment!
Impressive build, and very informative!
With that Smallrig Arm, are you able to make small tilt adjustments to Monitor without having to loosen/tighten something? I’ve gotten really used to this on other monitor mounts, and it’s hard to tell if the MD3507 is able to do this or not? Thanks m8!
Yes. It's a tension arm, so you can tilt it up and down without having to loosen it.
Nice build, I have something similar. Are you still able to use Raven eye through the touch screen of the monitor? I guess I'm wondering why bother with rave eye at all If not using the DJI app?
I'm using RavenEye to send a signal to a client iPad. Not for personal camera monitoring.
Hey, what about the RONIN battery with the DJI handle, takes a lot ? How long time is the DJI battery with that please
Hi, nice built! Do you plan on adding a V mount battery?
Thanks for watching! I don't plan on it, it would add more weight than I'd want. I do sometimes add an NP-F plate on top of the camera and add an additional Sony NP-F550. Thanks again for your comment!
I love this. Could you kindly answer this one question? This will be my first DJI RS purchase. Does the Raven eye need power? Or the HDMI powers it if it’s not connected to the Ronin?
How are you powering each accessory, like the monitor and the Raven Eye? Are you drawing power from the RS3 or powering each device with a separate battery? I'm thinking about keeping the rig as light as possible (since I do weddings where weight is an issue for holding the gimbal for hours).
Raven Eye has internal battery. Monitor runs off an NP-F550, it's a small one, but if you buy Blackmagic's version of this battery, it lasts a long time.
What hdmi cable did you use to this setup?
By you mounting the video transmission unit onto the back of the Ninja V, you had to remove the Master Caddy II that holds the SSD. Therefore not being able to record to the Ninja V. I personally record to both the camera SD Card and Ninja V for safety backups.
That's true; but you could mount the transmitter on top of the master caddy SSD. I just don't like using the SSD when running the gimbal, as it adds even more weight. But it's all personal preference at this point.
@@MergeDigitalMediathe master caddy with the SSD weighs an ounce, if that.
Did the cable from monitor to cam, give more “stress” for the gimbal’s motor? I have no idea about this.. 🙂
Do you have a link or name for the lens support attached to the plate?
What batteries are you using for your monitor. I must be using some old cheap ones on my new Atmos Shinobi but it dies or wont power on after 15-25 minutes of being on. Is that normal for a battery the same size as yours. Im sure I bought budget batteries so any recommendations for good ones would be awesome!
I'm using the Blackmagic Design 3500mAh Li-Ion NP-F570 Battery - these last a very long time.
@@MergeDigitalMedia Awesome thanks! I’ve been looking at going another route potentially and using a V mount battery to power both camera and monitor but really appreciate the recommendation! I’ll likely grab one down the road to have as a backup if needed🤙🏼
You have to tell me where i can buy this 90degree angle changer thing you plugged the screen cable in on the camera, please :I
That's from Tilta - Google: HDMI 90-Degree Adapter
Hi,i have pretty similar setup except that i am using meike s35 cine lenses.My big problem is that no matter how good my balance is,no matter how good i am performing the ninja walk,i always get shakiness and jitters on my footage.It looks more like a handheld than a smooth gimbal footage.Have you experienced same issues,or do you have any suggestions to try out??Thank you very much,great video!!
Hey, thanks for checking out the video!
I have noticed that issue before and have a few suggestions, some of which you may have already tried, so I apologize if this is redundant.
1. Do you use a lens support? I’ve noticed some jitters when not attaching the lens support because the BMPCC 6K Pro is so front-heavy.
2. Have you run the Gimbal Auto Check feature on the Gimbal? Inside the Ronin menu, you’ll find this option.
3. Have you run the Horizontal Calibration on the Gimbal? Also, inside the Ronin menu.
Hopefully, these suggestions help; let me know if you have any questions. And please subscribe to my channel for more upcoming videos! Much appreciated.
Same thing happening on my c70
As monitor arm are heavier than camera
Heard motor parameters need to adjusted +5% or something .
@@Neo-qm1dn What do you mean by monitor arm??I usually adjust the stiffness about 5-8 steps more after auto tune
@@sakisdimoglou1834 the arms we put monitor on
Perfect tip I will do that
@@Neo-qm1dn I think no matter what,with camera and lens without any image stabilization there’s no way to get a perfect smooth footage.Jitters are always gonna be there unfortunately…If you find any solution that works please let me know!
what is the last accessory for, please?
Holy shit
Hey, nice video. I was wondering why you use a FF motor with this lens. You can just connect your camera to the RS3 via Bluetooth and pull focus with the dial ( and start/stop rec etc)
I did not know that! Thanks for the tip, will do!
Are you sure you could pull focus with Bluetooth? I know you can stop/start.
@@nigerian-nightmare yes sir, i use it on the regular
@@joelelhadj6993 im going to look into this as well
@@joelelhadj6993listen man, can you direct me anywhere for help on this? I have some powerzooms Sony lenses that in theory I don't have to use a follow focus with in order to pull focus but if I connect via Bluetooth and set it to zoom, it only works with FF.
Is your gimbal the RS 3 Pro or the RS 3 (non-pro)? It looks like it is the RS3 Pro based on the fact that you can connect the DJI Tethered Control Handle.
Thanks for watching. It's the RS3 Pro
how did you get the DJI controll handle to be recognized by rs3 pro? I have it plugged in the same way is in your video, but nothing... Thank you!@@MergeDigitalMedia
What are you shooting with this?
Blackmagic 6K and URSA Broadcast G2
Damn I thought my set up was sexy.. lol
get out of here, too heavy
It's all personal preference at this point. It works well for me.