Building An RC Boat Out Of Trash (Part 1: Hull Template)
HTML-код
- Опубликовано: 5 окт 2024
- I will be using corrugated plastic to form the hull which will be covered in bondo and painted. The transmitter, receiver, servo and motors are from an old helicopter that was destroyed.
I hate those signs posted all over the place also, good for you for taking them down, and recycling them as well!
It's actually against city codes to place signs on public lands (like in a ditch or on a powerline post). Anytime I see them, I pull them up, stack the signs up to be reused, and use the wire frames in my homestead gardens. Insert them into the dirt and they are great to tie plants to. I take the plastic signs, punch several holes into the edges, string them together with twine to make a box, and pack fruits and veggies into them to deliver to the local farmers market. So thank you to all the people who leave those signs out for me to collect.
Thank you!! This was exactly what I needed for my home made boat plans. Thanks for taking time to share this.
Hi. Interesting vid.
I use this plastic real estate board stuff to build rc jet aircraft. rather than stitching it together, which must take a long time, why not just use hot melt glue ? Saves a lot of time if you're not good at stitching (like me). Thanks for posting.
hot glue sucks up water i here ill look into it but a hate it well the normal cheap stuff anyhow ..lol its good for hold stuff wile real glues set up
There was a time when there were a lot of great inventors and innovators. RUclips comments are living proof of why that time is in the past and there are so few current inventors and innovators nowadays. I have to wonder if the first people who learned how to make fire were shunned and told they were doing it wrong, because they didn't wait for lightning to make it like it had always been done before.
Nice project. Let the haters sit in the cold and dark and complain about the newfangled fire making that is all the rage. They can wait for lightning to make them some fire.
The plastic name is Corflute. It is very temperature sensitive too. It will stretch along the fluted length a considerable amount depending on temperature and humidity. Very poor template making material. Long skinny pieces are the worst.
Mark both sides of the zip tie n then split the difference... straight down the middle. I wanna build an RC boat so bad coz we have an AWESOME spot near me. Im pretty damn good at Geometry drawings. 3d curves i ALWAYS use a Zippy n split the difference. NEVER FAILS
In fact, this videos so good I'm gonna hit that like button!
Using a heat gun to lightly soften the plastic then bend it to the desired shape would help.
Due to being an Orthotic Technician i was contemplating using EVA Block cut into pieces and formed to make a Blank then Vacuum form it... but still need guudelines to grind to lol. I want a Batman style build with the split twin cones at the front. More pain for me in the design process but gonna be worth it. I know NOTHING about the RC Part 🤣🤣🤣
Great boat I really did learn how to make a proper one and u should do another one of these soon I find it really fun and interesting
Good job and keep it up😄
+Jaydn321 Thank you:)
Hummmm, boat made from trash. I wonder where I could find thread, needle, epoxy, bondo, spray paint, hardware (prop, U-joint, etc) foam, etc in the trash? Still....nice project, and I learned something. That is good! Should be an abundant supply of signs in just a few months as the Presidential race heats up....IF it can heat up any more than it is already!
Really good video
I don't know if i wasn't paying attention but i don't remember making a remote controller.
I dont know if you used the remote from your helicopter as well
Thanks bro. I like your project
so much.
I did mine out of Pizza boxies fiberglass with Polly resin fun project.hydro foil.
next time if you are working on the cheep you can use blue-jean material with fiberglass. Not as good as FG but in a bind its ok.
Your so creative and you must be popular
Grate job .did the plastic melt when the resin kick off
Nice, man
I tried your methode with foam incert..too light floops all over the water...need some ballast and weigth but it was fun... ducks unamused...llooll
haha! Awesome:)
Espectacular muy bien 😃👍👍
Did you take measurements of it cut out of paper? I'm trying to duplicate what you've done but I can't get the shape right.
I'm sorry I did not take any measurements.
i'm an artist myself, either you're born with it or for some they go school to learn, i've been learning to play guitar just by watching youtube, but i was born an artist never went to school for that, either u have or u don't so it goes both ways,
Hood video! 👍🏼 very informative 👍🏼
How many times have you cut your fingers using the blade without a handle?
Dude ur wicked!💯
50 points to Gryffindor for spotting the sneak a toke on the bench at 15:56 happy 420 man :)
hehe. It's just tobacco ;)
indeed Sir ;)
@11.50...groovy wave effect there in the edit...wasn't sure if I was getting prematurely seasick or flashing back to the '70s! "Don't drink and boatbuild!" 😂
Nice
thanks for the idea, sir good job all the way..
cut it in half make great broom stick paddles tooo...forgot the frames make good cage material ...make a rectangle wire together and screen at hard ware. keepem coming.
I going to modify your design a bit.
three folds.. cut the nose out of the hole piece skip the back.. glue plastic box on wood sticks to sides ....fill the shell with foam add controls, battery, 50 ft cheapy controller put top on it and give it to children!
put all the goods in a bag in the foam and box..... if it flips NO big deal, wipe the nose and the pride and start again.
HA! Great idea:)
im guilty..... retired engineer....
yeh tons of fun ideas for YOUR design. push a wire through it bend at 90 degress put ballast pontoons on it as training wheels.put a bigger motor on it and smoke it down the river with a spoiler on top... Flat the bottom and put a computer fan on it for the everglades tour????haha
should I shut up now! all this for your sign junk...every place i go I see them...put it to work as toys!
go gettum...
Will do!
Nice boat
hahahaha tej laus yeej hais tias pub dev Rog Dev tig rov Tom yus ces zoo li no ntag los ma me kwv aw..
Wow nice
soooooooooo gooooooooooooooooood !!!!!!!!!!!!!!!!1
Any details about layout for build
Do you need a FAST boat NOW?
Well CALL! THIS! GUY!
whatever we said is included is not included please buy our stuff
what's the size of the boat and the length
I see a "one hitter" pipe 👀
Would you be able to upload the drawings and sizes that we need to cut our material to
Lewis Day review my channel. I'm building similar structures.
Sweet
AWESOME!!! LOL 👍👍👍
0:12 Waaaay to make lemonade!
at first I thoug u put ads There :v
Sir can i get a pdf of this???
Lol 2x3. boards??. Although they are probably closer to 3 inches then 4in their referred to as 2x4s.. they r cuct 2 in thick and 4 in wide but by the time they r dry and ready for sales they shrink a lot
They're 2x3's dude.
They r referred to as 2x4s
They r cut at 4 inches but drying shrinks them to 3
I understand what 2x4 is. The ones used here are 2x3. Like this: www.homedepot.com/p/2-in-x-3-in-x-96-in-Select-Kiln-Dried-Whitewood-Stud-845000/100038668
You can also get 1x1's, 1x2, 2x2, 2x3 to mention a few, and yes 2x4 (your fav) :)
muito bem explicado
Paulo Robalo pi
මොකක්ද හදපු
What are the dimensions of the boat?
I will try to find my template and I will let you know.
By watching some of the Video...….we know ..he is not using any ruler or tape measure...... However he is building a nice WoodBoat Model. then...guess the size of the boat.…. I say...….18'' long
You need another couple of hands...
wow it's a paper boat haha
how did you draw bow? 7:49
sancak099 and I I
but the video gets stuck in the middle
Kierthan reddy dy
I'm pretty sure if anyone is doing anything illegal with those signs it's you by stealing them...
+Mohammed Neckbeard thank you
+Gabe Lewis FOCUS MAN
The signs are totally illegal, he can rip down any he encounters, just as I do.
I have heart burn τεχνολογια να φτιαξω πλοιο
if you comment to me like that YOU will be reported!,Period! Mr.Manilowa no need to write that dont like something switch channels. that is what i do...
top
or a photo please 🙏
porque no ase atra cosa como helicópteros
Looks awesome! You know what who cares what these jokers say! I just picked up a few trump for president sign that were in the trash and started building one so far so good and after bondo I'm reinforcing with fiber glass so whatever temp whatever happens it wont affect it too much lol. Great video brother! Fuck them school boat builders! There shit sinks the same way our will in bad situations!
i got that same weed pipe lol
Um that belongs to a friend ;)
thats sweet man u have a new sub from canada im new on youtube and lookin for suds 2 lots of cool rc snowmobile vids and more
paulgraham pgpg review my channel. I'm building similar structures.
Holy crap why is it so slow I had to watch at 2x speed
Holy crap why are you such an asshole
bruh u hate signs
ok!!!
Пётр Алёшев p
dab on thos haters 10:25
Couldn't afford a T-shirt man? 😕
bod එක
M
cccccoooooooollllllllllll
sir:-) can you send me that print on my email it will be you biggest help for me please?
review my channel. I'm building similar structures.
I not like
If you like woodworking, just look for Stodoys plans.
SPEAK THE HELL UP!
Hey man, just try to relax and see if you can find the volume button.
ponies anieeqakashif asfahankashif armyel
What? get a better mic then people could what you're saying.