Beginners Guide to the G1000 Autopilot in the Cessna C172 in Microsoft Flight Simulator

Поделиться
HTML-код
  • Опубликовано: 3 окт 2024

Комментарии • 84

  • @bananaGoochOil
    @bananaGoochOil 29 дней назад

    This is by far my most favorite plane to fly in the simulator and the autopilot navigation is a big help in understanding how to fly this plane! Big thanks man!

  • @gmpatriots25
    @gmpatriots25 Год назад +6

    Incredibly helpful tutorial on the Autopilot system in the Cessna 172 G1000. I just purchased the Honeycomb Bravo throttle quadrant which has AP controls built into it and had no idea how it worked. Your video, while I will need to watch it several times to fully understand, has helped me immensely to get started with this new control accessory. You now have a new subscriber. Thanks!

  • @barryflight1
    @barryflight1 6 месяцев назад +1

    I finally understand this confusing piece if kit. Great clear presentation.

  • @alexbain4983
    @alexbain4983 Месяц назад

    Absolute brilliant. A great way to learn to use your simulator. 🎉

  • @barriegatus4344
    @barriegatus4344 Год назад +1

    Bloody Great!!!!! Very clear and concise. Have been flying for 20 years, but left off for 7, then acquired FS 2020 and needed to brush up my skills. I recommend this clip highly. 10 out of 10. Keep going.

  • @howardslade267
    @howardslade267 Год назад +1

    Love your Videos on the C172. I mainly fly this with LNV and this really helps.

  • @overboostn
    @overboostn Год назад +1

    Best G1000 demo I've seen and I've been looking at a lot of them. I figured out EVERY problem I was having with this video. Thank you So much!!

  • @kevarms
    @kevarms Год назад +1

    Terrific video. This flight sim noob found it incredibly useful.

  • @ramnik.khanna
    @ramnik.khanna 2 года назад +5

    @Jonathan Beckett, thanks for an excellent tut on how to use the AP on the G1000!
    What is really creditable is that you did the whole video in one take, which is very rare amongst the other Flight Simmers on RUclips, who split each chapter of their tut, and later join them. This presentation style of yours indicates your deep knowledge, clarity of thought and mind, and confidence! Commendable indeed!
    You just earned a like and a new sub for your efforts!

    • @jonbeckett
      @jonbeckett  2 года назад +2

      I always record in one take, and never edit. Thanks for the vote of confidence! I think mistakes are just as valuable as doing things "right" - so if I make a mistake along the way, or can't figure something out, I say as much.

  • @SteveC1952
    @SteveC1952 2 года назад +1

    This video provides an excellent set of three views, G1000 PFD, Little Navmap for aircraft position/direction on the map, and the windscreen view. Jonathan demonstrates the basics of flying to/from the VOR, using the autopilot with the VOR and and ILS landing. An excellent multi view, detailed instruction video. VOR navigation caused me lot of confusion that took a while to sort out. This video would have helped a lot (also agood refresher today).

    • @jonbeckett
      @jonbeckett  2 года назад

      Thanks for the great comment :)

  • @oiwagner
    @oiwagner Год назад +1

    Very clear tutorials. High quality audio and video with a pleasant voice. Jonathan is also occasionally witty making it a joyful learning experience. Thanks and keep going.

  • @LeBongusDingus
    @LeBongusDingus 3 месяца назад

    Fantastic video. I’m upgrading my 172 next month with the G1000 this was an amazing demonstration

  • @mikepapahotel
    @mikepapahotel Год назад +1

    After a longish break from X-Plane 11 I recently bought MSFS. So much new stuff to learn after an absence of 2 years - and you dear sir are my go-to source for high quality in-depth tutorials.
    Thank you for all your hard work!
    I've scoured your library looking for a C172 G1000 tutorial with a short(ish) programmed flightplan with GPS nav and autopilot which terminates in a full ILS approach and landing.
    At the moment I'm struggling a little with the "enroute" section when no airways are involved and manually transitioning to a track that intercepts the localiser.
    If you can recommend one of your videos I'd be most grateful.
    Keep up the great work Jonathon...
    😊👍🏻

    • @jonbeckett
      @jonbeckett  Год назад

      I'm not sure I've done exactly what you're after - but if you just get used to switching the CDI between GPS and VOR you should be good.

  • @aureliomarsili3902
    @aureliomarsili3902 2 года назад +1

    Wow, very very useful, for anyone like me who don't read manuals ... thanks !!!

  • @eoinoconnell185
    @eoinoconnell185 4 месяца назад

    Really excellent tutorial.
    Instantly brought my flighting experience up a few levels.
    Many, many thanks !

  • @user-po5zf8vl8x
    @user-po5zf8vl8x 2 месяца назад

    Thank you for the time spent setting up these tutorials. I am very new to MSFS so a constant learning curve. I have over 1000 hrs as PPL in singles all VFR and very experienced in using maps. I have great interest in your map display. Looks like Google maps terrain, but it includes detailed airport info plus track made good snail trail. How do you do that. It’s exactly what I want to help me with enroute nav info. All the best Oldjla

  • @jonbeckett
    @jonbeckett  2 года назад +1

    The HD version of the video is processing as we speak - if you hang on a few minutes, it will be in glorious 1080P :)

  • @JohnHahn-o9n
    @JohnHahn-o9n Год назад +1

    Outstanding video. It allowed me to make extensive notes and significantly increased my knowledge. Well-done!

  • @stanvangilder9006
    @stanvangilder9006 2 года назад +1

    This is the video I've been looking for to understand the basics of navigating with autopilot with the G1000, MSFS. You cover a large range of features and options: My only suggestion would be to list an index of time markers. Like right now, I'd like to refer back to the section on DME... Then I'm off to check out your videos on flight planning.... Thanks again - New Subscriber

    • @jonbeckett
      @jonbeckett  2 года назад

      I'll have a look when I get a chance :)

  • @TWOKDOK1
    @TWOKDOK1 Год назад

    Excellent. I am ‘old school’ where software like MSFS and devices like the G1000 came with an instruction manual came with instructions! You had to get stuck in, do the graft and end up with understanding. These days the manufacturers seem to rely on You Tubers like yourself to do their job. Most of my frustrations so far has been because of ignorance of which button to press and when. Thank you for coming to my rescue. As a retired professional engineer, I need to understand how things work in order to make best of them and you certainly helped greatly with that. Thank you. Are you a pilot?

    • @Beery1962
      @Beery1962 Год назад

      Also a retired engineer here. I feel exactly the same way.

  • @KumarVishal
    @KumarVishal Год назад +1

    a big thank you for such a wonderful explanation....👏👏👏

  • @frmacleod
    @frmacleod 2 года назад +1

    Great video that had me feeling like an expert by the end of it -- even though there's a lot more to learn. Thanks.

  • @econhelp583
    @econhelp583 5 месяцев назад

    This is an awesome video! Thanks so much!

  • @andrewkay9592
    @andrewkay9592 2 года назад +1

    What a great video! This really explained everything clearly and easily understood. Thanks!

    • @jonbeckett
      @jonbeckett  2 года назад

      Glad it was helpful!

    • @jonbeckett
      @jonbeckett  2 года назад

      Of course they have now changed the G1000 over to the nxi haven't they ?

  • @flyinghorse2739
    @flyinghorse2739 9 месяцев назад

    Found your channel recently and I have to say, you have the best tutorial vidoes. Can you do some more on the 172 and dive deep into navigation, ILS, VOR, RNAV, and explain what these are and when to use them?

  • @DP-xz8xr
    @DP-xz8xr 2 года назад +1

    Nice video. I think I need to watch that a few more times!!!

  • @zstork
    @zstork Год назад +1

    Excellent video.

  • @billsmoot9421
    @billsmoot9421 Год назад +1

    This is great! Thanks!

  • @jakew9887
    @jakew9887 2 года назад +1

    Great presentation. Thanks. Would like to see some flights with ATC included if possible.

    • @jonbeckett
      @jonbeckett  2 года назад

      Do you mean "real" ATC (as in VATSIM), or using the ATC built into the game ?

    • @jakew9887
      @jakew9887 2 года назад +1

      @@jonbeckett Either one would be appreciated.

  • @pawelb3417
    @pawelb3417 8 месяцев назад

    Perfect tutorial. KGFK have a BC. Could you please check and make another video? How to use it?

  • @jeffreystone7327
    @jeffreystone7327 Год назад +1

    Mr. Beckett thank you for your time and sharing your knowledge. I am completely new and overwhelmed by the flight simulation. I have two on my PC that I enjoy. But they are for RC flying, which I have done for years. I have just enrolled in and just started my Ground Schooling. In hopes of earning my PPL. I have just subscribed to your channel. I have completed one video. Outstanding!!! But after that I’m lost in all that available. I was amazed at how realistic and detailed this simulation is. If you have the time, May I ask for some assistance please? I’m 64 and retired, definitely not the sharpest technology student. Wondering if you would help map out a direction with me in order to get a jump start on my flight schooling. Plus enjoying time on this simulator please? I have seen Microsoft simulator priced from $5 to $120. What do I need to enjoy and learn the controls and procedures of flying the Cessna 150 or Cessna 172 plane, simulator wise? I have a PC built for gaming by Jeff Ford out of
    Texas. I noticed you are using a Thrustmaster joystick and throttle. Besides that could you recommend which version of the simulator, yoke and rudder pedals that would make a good starting bundle please. Maybe in the $300-$400 range???? I know this is asking a lot. Any information, recommendations or suggestions would be greatly appreciated. Looking forward to watching, enjoying and learning from your channel. I’d just appreciate some help getting setup. Thank you and God bless.
    Jeff Stone

    • @jonbeckett
      @jonbeckett  Год назад

      As I replied to your email - your best bet - rather than just have my opinion - is to join a community such as VirtualFlight.Online where you can ask everybody.

  • @oscarholden8981
    @oscarholden8981 2 месяца назад

    Very helpful video, thank you. What mapping software is that?

  • @Horskrzy
    @Horskrzy 7 месяцев назад +1

    Thanks!

  • @ronstuveling
    @ronstuveling 2 года назад

    Thanks, this is very clear.

  • @jamescarey7277
    @jamescarey7277 2 года назад +1

    Ok, please ignore previous messages, I moved the plane to line up with the gps cdi and now it follows when I put press "nav". I thought the plane would find and follow the flight plan by itself. Still learning. Thanks.

    • @jonbeckett
      @jonbeckett  2 года назад

      It appears it will not acquire the track unless you are within certain bounds of it - so you can't be flying 90 degrees from it, for example.

  • @ramosnato
    @ramosnato 10 месяцев назад +1

    At time stamp 8:02 you show up multiple windows and in the middle it shows a map, where did you get that and how did you do the multiple windows.

    • @jonbeckett
      @jonbeckett  10 месяцев назад

      Hold down the ALT key, and press TAB repeatedly (hold ALT with the thumb of your left hand, press tab with your fingers) :)

  • @Damijan69
    @Damijan69 9 месяцев назад +1

    HI,Perfect instruction. Where I can download LITTLE NAVMAP, Thanks

  • @BillSmith-rx9rm
    @BillSmith-rx9rm 9 месяцев назад

    Is there a keyboard shortcut available for the GPS/NAV switch, or for the CDI selector button? I have searched and cannot find that these functions are available as a keyboard shortcut.

  • @mecraig6291
    @mecraig6291 Месяц назад

    Are the planes and uses the same in MSFS and FSX ?

  • @ThisLadWayne
    @ThisLadWayne 7 месяцев назад +1

    I don’t understand if you wasnt using the 3rd party software. What do you do about VOR or ILS. How would you know

    • @jonbeckett
      @jonbeckett  7 месяцев назад +1

      You wouldn't. It's an interesting point - there are navigation aids built into the game that exist in the real world, but you cannot easily lookup while in the game. BUT because they exist in the real world, you can look them up online (skyvector and chartfox come to mind).

    • @ThisLadWayne
      @ThisLadWayne 7 месяцев назад

      @@jonbeckett thank you i thought i was just being stupid, its a big learning curve.. If i set up in world map. i try to pick a point a few miles ahead of the runway to line me up i guess this is all we can do if we rely in game options only

  • @jamescarey7277
    @jamescarey7277 2 года назад +1

    Hi Jonathan, thanks for all the videos. I press the nav button (as in 25:50) and get a white "vor" next to green "hdg" and the plane does not follow the vor . What am I doing wrong?

  • @jamescarey7277
    @jamescarey7277 2 года назад +1

    Me again, sorry, I moved the vor cdi around and the indicator turned green and followed the course, but I am still getting the white "gps" next to green "hdg" and the plane does not follow my flight plan.

    • @jonbeckett
      @jonbeckett  2 года назад

      Yeah - see my previous response. I've seen that too. It seems you need to be within certain bounds for NAV mode to pick up the plan.

  • @finnross5360
    @finnross5360 2 года назад +1

    hey wehns your next live stream

    • @jonbeckett
      @jonbeckett  2 года назад

      I might take back off in a few minutes :)

  • @LXGNYT
    @LXGNYT Год назад +1

    Just Windering, What App Are You Using At 10:24

  • @alfredopeters9789
    @alfredopeters9789 Год назад +1

    I’m curious about the map you are using

  • @naunihalsidhu
    @naunihalsidhu 2 года назад

    Jonathan. I was trying to follow the Auto Pilot for the first time. Once i am in air @ 100 FT, I press the Auto Pilot and it just rolls my aircraft 360 degree and crashes.
    I thought it will just Level and fly straights, since I did not specify any heading height etc.
    Any idea what I could be doing wrong ?

    • @jonbeckett
      @jonbeckett  Год назад

      Sounds like you have a mapping conflict somewhere that's making that happen.

  • @burakgunduz254
    @burakgunduz254 Год назад +1

    how to see my aircraft on littlenavmap

    • @jonbeckett
      @jonbeckett  Год назад

      in the simulator menu, make sure it is connected.

  • @mohamadezzeddine3957
    @mohamadezzeddine3957 Год назад +1

    Don't take this the wrong way, but... i love yoy

  • @zoezoe358
    @zoezoe358 9 месяцев назад

    but i thought you are supposed to turn on beacon before starting the engine....
    3:15