@@68buicks dude those uppers have been around for literally a decade lmfao. but i just saw a 45 mac 10 which is a rarer one for like 14k. so try low teens. i found two on gunbroker for 12k and right at 9k. so i wasn’t wrong but you were by saying ‘high teens’ when they don’t even go above 15k.
or the looty which is quite litterally a step by step booklet to build a machine gun out of hardware store parts think brandon herrera has a vid about it
I'm pretty sure if you read the manual it's specifically states that you must perform a "gangsta tilt" in order to properly fire the gun. +2 accuracy if you aim it way above your head while hiding behind the trunk of a car
When they came out they were remarkably good little sub machine guns for how cheap they were. Problem is that's exactly what landed them in the hands of thugs too and ruined it for the rest of us
Why didn’t you tell us you were selling the guns already and that most of them are gone? It would have been cool to know how you sold them so we the people could have purchased a few. This is not an insult, but rather a question don’t take it the wrong way. Other than that, I’m loving your content, showing off the guns how they work it’s just beautiful and how you take care of them too well done, sir.
Do u live in a state where u can own this well that's obvious but did u have to go through more paperwork? And if u decide to move to a different state can u still keep it or would it be illegal
That mac looks like it needs a deep cleaning real bad, probably hasn't had one since the day it was first made. It also appears to desperately need to have the whole thing refinished. I go out on a limb here, i think it was manufacturing before the now defunct 1994 AWB, so most likely an 80' model whitch would explain why the deep cleaning and sun sequent total refinishing is needed.
Unnecessary but funny as hell 😂😂😂
The brief case courtesy of basic training or tech school. I lost mine years ago. 😂
Buying a 9mm mac is like buying a v6 camero
😂😂
@@pablo4yuexcept V6 cameros have over 300hp now lol
Had plenty experience with this weapon when I was deployed to Grove Street, always accurate always full auto
Lmfao 🤣
Me toooo G😂
Me too what years was your there Grove street for life
Grove street Rider fo life!!!😅😂❤
Always shootin sideways
CJ from San Andreas elevated in proficiency when he learnt to hold the mac sideways.
ahhhhhh😂
There was no MAC in SA. It's not difficult to find difference but dumbest people can't do even that.
remember, if the muzzle is touching your target, you can't miss!
Watch me play Call of Duty and I’ll prove you wrong in 5 seconds flat
@@westonprather3157for real tho😂😂😂
@@westonprather3157skill issue?
@@westonprather3157fact
And it's even better if your shooting steel upclose. Stay accurate and not safe boys😅
Oh... Gotta have that gangsta lean!!! I was wondering why I was missing!
lean ? he was leaning ?
Stop embarrassing yourself nobody shoots like that
the mac-11 really is just a VERY angry box...huh
It's a mac-10
Absolutely necessary
People actually made this gun. With machine equipment and not a bench grinder, some spotwelding and parts from Harbor Freight.
Yup very easy to copy n make fully auto... These were only$200 bucks back then now I've seen them about 900 bucks
Just 3d printed most of one bout to order the rest of the parts 😊😅
@@MannyGunzzuh… an original full auto mac11 goes for like 5k all the way up to 10k these days
@@68buicks dude those uppers have been around for literally a decade lmfao. but i just saw a 45 mac 10 which is a rarer one for like 14k. so try low teens. i found two on gunbroker for 12k and right at 9k. so i wasn’t wrong but you were by saying ‘high teens’ when they don’t even go above 15k.
@@m1u2j1o9yet another free person proving Mr. Luty's point.
cuz that's how it comes out the box!! 😅🎉😂
LOL!!
That's how it's laying when they steal it.
Always thought the mac10 looked like something some machinist made in his garage.....but I still want one ...
Should look at a m3 grease gun
@@2AURWAY another one for sure
It’s because some random machinist probably made it
or the looty which is quite litterally a step by step booklet to build a machine gun out of hardware store parts think brandon herrera has a vid about it
theres a guy on youtube that made one in his garage from scrap metal and no blueprints
Awesome to find firearms like this. Just sitting around from a previous generation and finally made it into capable hands.
They say you can't hit anything shooting sideways,but I've done it and it works for me as well as having the gun vertical I'm most cases
There's plenty of sideways and 45 degree or whatever angle shooting in cqb situations. Good to train at all angles
The original lmperial Stormtrooper's weapon.
Love the style of the Mac 10 and 11!!! 😊
Thank you for keeping the streets safe with your tutorials
I’m impressed! The open bolt action always makes it more accurate though ;)
Everything you said was wrong. This one isn't open bolt, and open bolts are less accurate most of the time.
@@MP-ky3hc it was a full auto joke
I love this 😂
If the 80s could talk
Wooo 90kid nostalgia here. It comes
Always make sure there are powerlines in the background. They make a good backstop.
Aint nothin but a gansta paaaartaaayyyyyy❤ 🎵 🎶
Step 1: you don’t, just spray and pray
jealous as hell of that classic mac. they’re so gangsta it’s nasty
That's hilarious 😂 I needed that
I have a old Mac-11 chambered in 380 with two stamps on it
I havent laughed that hard in a while.
My absolute dream gun tbh
That was actually hilarious 😂
I had one of those with a hellfire trigger. Was a great machine.
Will you be doing any giveaways from your weapons haul? I love seeing your content about these guns as always lol
Oh the good old days.early 90s los angeles. We call it the sowing machine.
Awesome bro
Fun fact: All macs are all are accurately factory fine tuned to shoot the gangsta way.
It’s no such thing as the gangsta way stop watching so many movies
Next level Genius 😂
Grove street gang approves
I can almost hear the fuds yelling right now 🤣
I'm pretty sure if you read the manual it's specifically states that you must perform a "gangsta tilt" in order to properly fire the gun. +2 accuracy if you aim it way above your head while hiding behind the trunk of a car
It's amazingly Accurate through volume of fire! 😂
When they came out they were remarkably good little sub machine guns for how cheap they were. Problem is that's exactly what landed them in the hands of thugs too and ruined it for the rest of us
Hurtin burger bullets 😂
Mac ain sht but a hammer
Damn were did you find that hirtenberger ammo?😂
thinking the same thing. prob from the dude who originally bought the gun\case
Maybe try a center axis relock grip, might help
Holding the Mac 11 like a G hits every time... 😂😂😂 Facts tho. 👌
Like a G? Bruh stop watching so many movies it’s embarrassing nobody does that in real life
@@mustafamawla219nobody? Bro get a grip
Am I the only one that finds these completely useless if not full auto?
I thought this too 😂
Fr bro
It's for nostalgia. Looks too cool in your gun collection not to have.
Why didn’t you tell us you were selling the guns already and that most of them are gone? It would have been cool to know how you sold them so we the people could have purchased a few. This is not an insult, but rather a question don’t take it the wrong way. Other than that, I’m loving your content, showing off the guns how they work it’s just beautiful and how you take care of them too well done, sir.
Or just throw it down a flight of stairs.
True Lies edition?
@@lygerzer0 Yup!
Kill$ everyone, but they are all bad! 😆
@@madsam7582
😂
It’s the only version that I can think of 😅🤣🤣🤣😎
Almost wanna watch true lies now😂
@@lygerzer0 No b.c. that was an MAC M10, not M11. This shit here is also jsut a semi pistol so... nothing will happen xD
It's always necessary to remember the up grades and time options.
from where do you have the good old Hirtenberger Munition?
He’s hilarious for that 😂😂
Ive seen them with a bike chain stock that goes around your shoulder in the hood
Thats why it comes out the box that way
Exactly 😂
Can i ask a question would it be any chance u got a colt single action army revolver from the abandoned fire arms?
How about upside down for ground level targets. I get the best results with that hold.
Those triggers slap like crazy 😅
Damn I forgot all about that. I was wondering why I sold that piece of shit and now I remember! 😂 Mine was a 9mm this looks like 10mm
Came to say this. Sold mine like 2 months after I got it
@@tcslusher78 man I think I had mine about the same amount of time. It couldn't hit shit and that finger slap was no joke
The good ol' Chinese sweep
🤣🤣🤣🤣🤣🤣🤣 such a country gangster
Any for sale my guy?
Facts
Parts kits are cheeeeep (ish, relatively speaking, etc etc.)
you need the carl Johnson style for that specific type of weapon
I see the appropriate technique for accuracy is the urban modified grip
Like a gangster 😂
That’s really cool
You gotta fire it upside down with your pinky to obtain maximum accuracy!
Dammit! That’s what I’ve been doing wrong. Going to try tomorrow.😂
😂😂😂😂 subscribing just from this reel.
Blud think he is in instagram 💀
Fair point, homie😂
It's literally A damn box that shoots bullets....you gotta do the intratec tec-9
Do u live in a state where u can own this well that's obvious but did u have to go through more paperwork? And if u decide to move to a different state can u still keep it or would it be illegal
Very necessary 🔥
@enoch1zg531Bro...?
MPA defender? If you hold it about half way up the mag the recoil gives it enough play to bump fire pretty easy
Some me love my dreams… life is juts not fair sometimes
Do you still have some of those .357s? I want to make an offer on some
Easy E approves of this message
Nawl he doesn’t nobody holds their gun sideways but people in movies
Mac 11’s are closed bolt while mac 10’s are open bolt right?
Está Arma sempre foi eficiente e para mim é melhor opção para equipes de Segurança
Have always wanted one!
Those are fun as heck until you get TRIGGER SLAP!!
Then you or your friends no longer want to play with that again. I know I have 2 of these.
I love how this gun sounds really cheap because it is really cheap to make
Got one. I think mine's messed up though. The fires three rounds at a time
I use to have a cobray just like this one I even have a short on my channel with it!
I actually prefer the .380 auto clambering in my mac . I save 9mm for the uzi , and .45acp for the Tommy.
Gun seller: You look like a Draco kinda guy.
Buyer: Well I was…but I’ll take a Mac-11 with a switch.
I miss the 80's
Now it all makes sense..kind of.
Bro struggled to pull that charging handle back
Black leather gloves increase accuracy also if you watch 80s movies.
The forbidden strapler
Love it perfect satire ❤️. 😂 but I’ve done that a few times in the range just to see why. Shit hurts my wrist and my aim is doggie doo.
It’s the way it comes out the box
Newsome is having a fit when he sees this.
I was expecting it to turn into another gun 😂
Is there a way you can convert it to fully auto versus semi auto?
Any for sale? Looking to get a cool old rifle.
I have a Cobray, i hate it. Would you like to buy it?
Upside down works even better.
Word Homie Mad Mag Daddy G! Give me a heart back or no re ups Dawg!
Are you selling any of those rifles???
I want one so badly!
No way... that's why I've been missing... not that I just don't have one, hut I need to tilt it
That mac looks like it needs a deep cleaning real bad, probably hasn't had one since the day it was first made. It also appears to desperately need to have the whole thing refinished. I go out on a limb here, i think it was manufacturing before the now defunct 1994 AWB, so most likely an 80' model whitch would explain why the deep cleaning and sun sequent total refinishing is needed.