If it weren't for prompters, how many edits are added to the final cut..wow.👌👌 Thanks Brian and the others at HVAC/R School who make these educating videos possible. Please continue to bring us more videos like important protection for service technician and precautionary steps during service of a suspected burn out., and proper steps to clean the system, what parts should be replaced etc, and get it running again.
I’ve already went through HVAC trade school, graduated with flying colors, got my universal 608, been working in the field for about 3 months now, and I’m still watching these videos. I guess I’m fully dedicated to this magnificent trade. But man do I wish I discovered HVAC when I was younger. Better late than never!
Same here. I'm 40 now but I was always interested in HVAC in my younger years but never got in to it until I was 30. Been in the business for 10 years now and still learning about HVAC. I'm more into inverter system atm. Most of the technology is moving forward to Inverter for more efficiency.
Female homeowner here and thanks to you I know so much more about my heat pump and it's operation. I can now have an intelligent conversation with the HVAC guy when my system is not functioning properly.
This video is GOLD! Being a new HVAC tech this 3d model is amazing to actually see the inside working components operate and flow. Thank you for this video!
My AC is great again thanks to you. I did a compressor replacement not from a burnout but rather from age 20 years old and a very high electric bill. I learned about compressor oil is hygroscopic along with the correct compressor replacement voulme. I replaced and moved the clogged dirty rusted dyer line filter to the air handler in the attic. The filer by default was outside at the compressor Goodman. Well that didn't seem correct even though the manufacturer had it outside when ever video said put it at the airhandler. Well now I know why it looked like it came from the bottom of the ocean. I even put in a sight glass with values correctly oriented in the proper direction on both side. Yeah, I burnt two sight glasses but I learned how to do it correctly without the black dot of death inside. You know you guys have done this also :) Now it's roasting hot and one year later it's working great.I even filtered out all the fires from canada using my airhandler. You literally saved me big bucks and no leaks. I know you ac guys are going to hate but with the right skill set you can do it (Rob Schneider aka Duce) thanks to this channel.
Very good presentation. I especially appreciated your comment on refrigerants boiling cold - that was what I was missing. For your state change (liquid to vapor) you may give the example of 212 degree water going to 212 degree absorbing 970 btus/pound of water, not the normal 1 per degree change between lets say 211 and 212 degrees. 2ndly, it helped me to think of the AC/cooling portion is sucking the warm/hot air over the coils so that the heat can be removed and the resulting cool air being expelled into the room. Many folks look at this as blowing air over the coils and can get confused. As others have stated, this is a wonderful preseentation - thanks again.
Cruised through hvac school, got my epa universal, landed a sweet career as an apprentice and already a month in. I’m loving this field so glad I got into this. Knowledge just never stops, so rewarding to understand what you are saying! 💪🏽👨🏻🔧
Thank you very much a very thorough explanation of all the system components. As a homeowner and one who installed their own system, it is great to know what all the functions are on my system..
Yes this should be sold to schools,graphics, or as you say 3-D model. Format is 21st century. Yeah man! I had old dead units,old dead techs (lol),2-D books at which to wrap my understanding of heat pumps. No one would elaborate, maybe they were not sure,or just insecure. Thankyou Again!! Great content as usual MR. O..
This video is simply superb. As far as educational content is concerned, this is one of the best videos I’ve ever seen. Thank you so much for your work!
Like the picture of frosted outside unit heat pump. Typical central FL situation where homeowner turned on lawn sprinklers in attempt to protect their plants from freeze damage, putting a lot of local humidity in air near the outside unit.
Thanks Brian this video is a great tool for H.O.'s to explain operation in place of lengthy on site representation. I am retired from the HVAC industry as an owner/ service tech. I also live in central Florida. Wouldn't mind checking out your operation some time.
I wish i had videos like this during my bachelor years. It would be much much easier to understand and extremely more interesting . Thank you a lot HVAC School!
06:35 These are called _aspirating_ accumulators. They are sometimes pre-charged in the field with a small amount of oil to minimize the aspiration of liquid refrigerant. better solution is a separate oil separator ahead of the accumulator, and a low oil cutout in the compressor. I have seen more than one Coplemetic compressor throw a connection rod due to poor oil return. The nice thing about Colemetics is they can be rebuilt, unlike standard herms.
The heatpumps I've been working on here in germany don't have a transformer and all that wiring, just the 400V for the compresser and 230V for the controls. I think all that is integrated into the main circuit board most modern machines here, 230V going directly into the circuitboard, and the board is spitting out lower voltages for the sensors and stuff.
Very nice air conditioner heat pump parts overview. I dug the 3D pictorial motion graphics and this information gave me a much better understanding of this technology so that I can better serve our HVACR customers.
3D hi-speed ADHD gold! This is your best yet! Colorful, concise and clicks along at an exciting pace. Really keeps my attention. Does having 10 kids make your teaching style evolve like this?
I have to say, your videos are so incredibly educating even for those not in, or training to be in the trade. Your channel, Craig with AC Service Tech, and Curtis from HVAC Guy are the best. Are your animations from Interplay HVAC Simulations?
Amazing Video thanks a lot for all the work to get this étayé if the art explanation for the hvacr leasing community and and curious fellow Bravo make us more of the 3 d ones happy new year 2023
Ive worked on a few heat pumps that didnt have any accumulator on em.. the compressor wasent ever the issue on those systems though.. except if the accumulator was installed somewhere away from the compressor, which would make it usess:.. right?
Im have been trying to find out if that was to install a plate heat exchange on the low side to cool the high side if it would raise the efficiency of the unit
Hi I was wondering how much length is required for heat pump. Or sould I say what's the minimum length is required between inner unit and outer unit for heat pump to cool down well insulated place ?
Question I have a heat pump that's in the heat mode and runs the pressures up to 500+ psi then locks out but in the cooling mode it runs fine. It has a TXV on the HP. I believe the TVX is bad. Feedback when you can.
Sounds like the outdoor TXV is stuck open, or the bulb lost it's charge. You can try putting the sensing bulb in ice water to see if TXV closes & then put it the bulb in hot water to see if it opens. When your doing that keep an eye on your suction pressure to see if it's changing. 👍
Do you have any section drawings or diagrams that you can share for a heat pump system in a residential high-rise? i.e. whole package install including drip pan to external drip pipe outlet on the facade of a building?
If it weren't for prompters, how many edits are added to the final cut..wow.👌👌
Thanks Brian and the others at HVAC/R School who make these educating videos possible. Please continue to bring us more videos like important protection for service technician and precautionary steps during service of a suspected burn out., and proper steps to clean the system, what parts should be replaced etc, and get it running again.
Ii u
Uu
Uu7uuu
Uu
Uu7uuu
I’ve already went through HVAC trade school, graduated with flying colors, got my universal 608, been working in the field for about 3 months now, and I’m still watching these videos. I guess I’m fully dedicated to this magnificent trade. But man do I wish I discovered HVAC when I was younger. Better late than never!
Same here. I'm 40 now but I was always interested in HVAC in my younger years but never got in to it until I was 30. Been in the business for 10 years now and still learning about HVAC. I'm more into inverter system atm. Most of the technology is moving forward to Inverter for more efficiency.
I hear ya Greg, I’m 40 and just got into the HVAC field 3 years ago and I love it. I wish I was introduced to the field in high school.
I've ben doing this 24 years, believe me, you'll always run into new things.
Female homeowner here and thanks to you I know so much more about my heat pump and it's operation. I can now have an intelligent conversation with the HVAC guy when my system is not functioning properly.
This video is GOLD! Being a new HVAC tech this 3d model is amazing to actually see the inside working components operate and flow. Thank you for this video!
Honestly, one of the best videos out there for not just describing the Heat Pump but showing how it works.
Brian and the HVAC School knocked this out of the park, as they always do! Thank you for your dedication and service to the industry!
Best heat pump video of all time. One of the most well made videos on RUclips period.
My AC is great again thanks to you. I did a compressor replacement not from a burnout but rather from age 20 years old and a very high electric bill. I learned about compressor oil is hygroscopic along with the correct compressor replacement voulme. I replaced and moved the clogged dirty rusted dyer line filter to the air handler in the attic. The filer by default was outside at the compressor Goodman. Well that didn't seem correct even though the manufacturer had it outside when ever video said put it at the airhandler. Well now I know why it looked like it came from the bottom of the ocean. I even put in a sight glass with values correctly oriented in the proper direction on both side. Yeah, I burnt two sight glasses but I learned how to do it correctly without the black dot of death inside. You know you guys have done this also :) Now it's roasting hot and one year later it's working great.I even filtered out all the fires from canada using my airhandler. You literally saved me big bucks and no leaks. I know you ac guys are going to hate but with the right skill set you can do it (Rob Schneider aka Duce) thanks to this channel.
Thanks God there’s people like you ,
I just pray so you keep on helping how need you every single day , like me .
Thanks again Bryan👍🏻🙏🏼
these visuals and animations are god-tier. over the top quality stuff
Schools everywhere should be using these. Great work mr Orr
Very good presentation. I especially appreciated your comment on refrigerants boiling cold - that was what I was missing.
For your state change (liquid to vapor) you may give the example of 212 degree water going to 212 degree absorbing 970 btus/pound of water, not the normal 1 per degree change between lets say 211 and 212 degrees.
2ndly, it helped me to think of the AC/cooling portion is sucking the warm/hot air over the coils so that the heat can be removed and the resulting cool air being expelled into the room. Many folks look at this as blowing air over the coils and can get confused.
As others have stated, this is a wonderful preseentation - thanks again.
Cruised through hvac school, got my epa universal, landed a sweet career as an apprentice and already a month in. I’m loving this field so glad I got into this. Knowledge just never stops, so rewarding to understand what you are saying! 💪🏽👨🏻🔧
This is the type of education I wish I had back in Trade School over 10 years ago. Great video!
Awesome video. Thinking about getting a heat pump but didn't really understand it all until this video. Thanks so much!
Thank you very much a very thorough explanation of all the system components. As a homeowner and one who installed their own system, it is great to know what all the functions are on my system..
Yes this should be sold to schools,graphics, or as you say 3-D model. Format is 21st century.
Yeah man!
I had old dead units,old dead techs (lol),2-D books at which to wrap my understanding of heat pumps.
No one would elaborate, maybe they were not sure,or just insecure.
Thankyou Again!!
Great content as usual MR. O..
This video is simply superb. As far as educational content is concerned, this is one of the best videos I’ve ever seen. Thank you so much for your work!
Like the picture of frosted outside unit heat pump. Typical central FL situation where homeowner turned on lawn sprinklers in attempt to protect their plants from freeze damage, putting a lot of local humidity in air near the outside unit.
Thanks Brian this video is a great tool for H.O.'s to explain operation in place of lengthy on site representation. I am retired from the HVAC industry as an owner/ service tech. I also live in central Florida. Wouldn't mind checking out your operation some time.
Very much appreciated, you actually relay the information far better than my Tech School teacher ever did.
Man this dude is like a brain surgeon in the HVAC field...Love watching these videos...Great job man!
I love this video. Thanks 💪🏻
I'm not a current HVAC student, but you've made one with your videos. Thanks for the education.
Very nice and simple explanation! thank you!
I wish i had videos like this during my bachelor years. It would be much much easier to understand and extremely more interesting . Thank you a lot HVAC School!
Great visualization. Even if the schrader valve.
Those graphics are amazing! Great work putting that together. Being a visual learner, that was invaluable. Thank you!
Great video.
06:35 These are called _aspirating_ accumulators. They are sometimes pre-charged in the field with a small amount of oil to minimize the aspiration of liquid refrigerant. better solution is a separate oil separator ahead of the accumulator, and a low oil cutout in the compressor. I have seen more than one Coplemetic compressor throw a connection rod due to poor oil return. The nice thing about Colemetics is they can be rebuilt, unlike standard herms.
Thank you very much for making this videos. AMAZING Job. You guys have the best graphic examples for us to learn about HVAC. Congratulations.
the most mind blowing thing i learned in hvac trade school is that boiling water is a cooling method
This video is a fantastic walkthrough. I'm learning so much from all your educational content. Thank you!
Amazing illustrations and animations so helpful to absorb the basic principle of heat pumps. Thanks for sharing.
Great video Brian. Keep it up
What a great overview!! 👍
So very cool, I am very new to HVAC and this really helped simplify heat pumps for me. Great job love your content.
The heatpumps I've been working on here in germany don't have a transformer and all that wiring, just the 400V for the compresser and 230V for the controls. I think all that is integrated into the main circuit board most modern machines here, 230V going directly into the circuitboard, and the board is spitting out lower voltages for the sensors and stuff.
Great video presentation ❤❤❤ VERY MUCH informative,
Thank you for sharing your knowledge ♥️🇵🇭
Very nice air conditioner heat pump parts overview. I dug the 3D pictorial motion graphics and this information gave me a much better understanding of this technology so that I can better serve our HVACR customers.
Thanks Brian really educational for hvac tech like me.
You are awesome Brian I have learn so much from you and your guys THANKS 🙏🏽
Great video in 3d bro thank you
Thank you for all the useful information that should help save people money and learn a trade.
Thank you so much for posting this video. The 3d visualization is impressive, very well done. Thanks again
This video has been great help to me, thank you very much.
This is awesome. Do you have one for oil furnaces and boilers??
Superb
Great info. and great graphics. Thanks Bryan.
EXCELLENT overview. Thank you very much. The animation was also fantastic!
Thank you so much it was a professional explanation.
love it and thanks for the sharing and it is great video which explained the system very well!
3D hi-speed ADHD gold! This is your best yet! Colorful, concise and clicks along at an exciting pace. Really keeps my attention. Does having 10 kids make your teaching style evolve like this?
I have to say, your videos are so incredibly educating even for those not in, or training to be in the trade. Your channel, Craig with AC Service Tech, and Curtis from HVAC Guy are the best. Are your animations from Interplay HVAC Simulations?
Nice and simple explanation.. video on 3d was fantastic.
Great video and amazing illustration. Great work.
good refresher course thank you
Excelente!
Amazing Video thanks a lot for all the work to get this étayé if the art explanation for the hvacr leasing community and and curious fellow Bravo make us more of the 3 d ones happy new year 2023
Very nice video and easy explained, thanks brain
He's a good teacher.#GreatJob! 👍
3D model is sweet! Keep up the good work!
This is outstanding. Much appreciated
Thanks a lot Sir....Like this Video❤❤👍👍
Very nice.
Amazing video!
Great video 📹,thanks for teaching!!!
Awesome video
just wow. excellent.
Thanks for making these video really like the 3D
Great video
I hope you don’t mind if I use this video in our training. Awesome job
Use away brother
Thank you very much
Very informative video. Thanks a million.
Only Brian can sum up 4yrs of school in 20 min 😂🥇👌
THANK YOU !!!!!!!!!!!!!!!!!!!
انا حبيت هذا العمل
Ive worked on a few heat pumps that didnt have any accumulator on em.. the compressor wasent ever the issue on those systems though.. except if the accumulator was installed somewhere away from the compressor, which would make it usess:.. right?
IMPRESSIVE VIDEO
Im have been trying to find out if that was to install a plate heat exchange on the low side to cool the high side if it would raise the efficiency of the unit
Super nice
Hi I was wondering how much length is required for heat pump. Or sould I say what's the minimum length is required between inner unit and outer unit for heat pump to cool down well insulated place ?
I was wondering if u give one or 2 hour class on zoom and if u do how much u charge I am really interested in taking class thanks.
This was amazing
👍👍👍
Very nice 👌 thanks
Question I have a heat pump that's in the heat mode and runs the pressures up to 500+ psi then locks out but in the cooling mode it runs fine. It has a TXV on the HP.
I believe the TVX is bad.
Feedback when you can.
Sounds like the outdoor TXV is stuck open, or the bulb lost it's charge. You can try putting the sensing bulb in ice water to see if TXV closes & then put it the bulb in hot water to see if it opens. When your doing that keep an eye on your suction pressure to see if it's changing. 👍
Thanks
Explain the de ice loop
Do you have any section drawings or diagrams that you can share for a heat pump system in a residential high-rise? i.e. whole package install including drip pan to external drip pipe outlet on the facade of a building?
16:37 so the heat in heat mode is not technically coming from the outside air but from the compressing of the gas?
So both condenseor snd Evaporator are fin type in heat pumps?
❤❤❤❤❤❤
You go so fast
Wow
ممتاز
So is the front seat back seat thing correct here? I was taught that back seated is all the way out, and front seated is all the way in....???
How do you cut the air conditioner on??
Tk's a lot
Sir where is the heat exchanger in heat pumps
What about a heat pump for a pool