Francesco, thank you for sharing your information with us. This is another helpful video. I respectfully suggest that you use jack stands when working under your car. The hydraulics in the floor jack can fail, which would injure you badly or possibly kill you. Please be safe!
Ciao. Volevo chiederti se è possibile cambiare il filtro senza usare la diagnosi oppure se serve per forza usarla per attivare la pompa del gasolio per fare il riempimento del filtro?
Good afternoon. I carried out the fuel filter change on an F11 520d without realising that there was procedure for bleeding... I did 10 ignition cycles and tried to start, nothing. Looking online and saw all the info about the bleed procedure. The correct bleed procedure has now been carried out twice but the car still won't start. The first time the bleed was carried out you could hear the air and fuel being purged through. No air sounds on the second run. Any info or advice would be much appreciated. Cheers.
Hello Francesco , could you tell me which type of Car-jack you are using? I own also a 530d xDrive and do the most service stuff on my own, but due to Corona my workshop closed and I need to these things on the street.
Yes you can , I have done it for 3 times without the ISTA , make sure you clamp end of the hose , even if you forgot about that it's fine the car will start a bit slower . What you can do ... Put ignition on for couple of times and then start the car and enjoy your ride!
Some scan tools also have a 3min low pressure pump run programme prior to start to remove any air I recommend you get one of these for fault codes and battery replacement too
I replace it last year, run ista procedure for remove air during procedure I hear pump and stream into filter, but car start from 3rd attempt. On next day same 3rd attempt for start. But after I dont have any problems. Why bleeding didnt remove air? Maybe High pressure pump issue?
Hi, Thank you very much for another fantastic video. Your videos are the best👍 Can I ask where you got Ista+ from? I have an F11would like this software.
Without ISTA, I try to start engine. after no push the brake and start key on & off 4~5 times. There's no problem driving my car. I upload my youtube this processing. thks^^
Francesco, thank you for sharing your information with us. This is another helpful video.
I respectfully suggest that you use jack stands when working under your car. The hydraulics in the floor jack can fail, which would injure you badly or possibly kill you. Please be safe!
Ciao. Volevo chiederti se è possibile cambiare il filtro senza usare la diagnosi oppure se serve per forza usarla per attivare la pompa del gasolio per fare il riempimento del filtro?
Good afternoon. I carried out the fuel filter change on an F11 520d without realising that there was procedure for bleeding... I did 10 ignition cycles and tried to start, nothing. Looking online and saw all the info about the bleed procedure.
The correct bleed procedure has now been carried out twice but the car still won't start.
The first time the bleed was carried out you could hear the air and fuel being purged through. No air sounds on the second run.
Any info or advice would be much appreciated. Cheers.
Hello Francesco , could you tell me which type of Car-jack you are using?
I own also a 530d xDrive and do the most service stuff on my own, but due to Corona my workshop closed and I need to these things on the street.
OBDeleven just added a fuel priming app for this car. Is that pretty much the same thing? Is that safe? It only does it for 30 seconds
Nice job. Can i ask where you got Ista+ from? I have an F11would like this software. Thanks
Yes , that will help us a lot, If somebody will explain how to install ista+
Ciao ho visto il video, volevo sapere se è possibile sostituire il filtro senza usare il PC per la procedura di svuotamento aria, grazie
No your hpfp will be smoked after crank the car without bleed the system
God job 👍 Is it possible do this maintance without Ista use?
Yes but you risking the CR pump running on air.
Yes you can , I have done it for 3 times without the ISTA , make sure you clamp end of the hose , even if you forgot about that it's fine the car will start a bit slower . What you can do ... Put ignition on for couple of times and then start the car and enjoy your ride!
Some scan tools also have a 3min low pressure pump run programme prior to start to remove any air I recommend you get one of these for fault codes and battery replacement too
I replace it last year, run ista procedure for remove air during procedure I hear pump and stream into filter, but car start from 3rd attempt. On next day same 3rd attempt for start. But after I dont have any problems. Why bleeding didnt remove air? Maybe High pressure pump issue?
This is great job and well explained, thanks!
Hi, Thank you very much for another fantastic video. Your videos are the best👍 Can I ask where you got Ista+ from? I have an F11would like this software.
Without ISTA, I try to start engine. after no push the brake and start key on & off 4~5 times. There's no problem driving my car. I upload my youtube this processing. thks^^
Please, do not try to start the engine without performing a bleeding procedure. This can cause high pressure fuel pump damage.
@@marianogambardella668 Yes, you're right. I'll perform bleed air procedure next time. 😊
@@marianogambardella668Not even the BMW mechanic does it, they just fill back the fuel and starts it.
Can you make a video how to change serpentine belt
Thanks for video, ista works good
Nice tutorial, thank you
Nice video sir🙏🙏🙏🇮🇳
Bonne vidéo 👍.
hello brother i saw your videos and i work with bmw cars programmer and i like to work with you if we can chat together or if you have an insta page