Clear and concise. Easy to listen to you as you have everything ready to go and you know what you’re doing! Question re: blade. I heard you say blade style when you set custom. I’m not with my machine to check, is that the standard blade? Guessing it would be a good idea to set one blade for especially for aluminum?
What a great idea. I never thought of using a cricut to do the metal. I love it! And what a super awesome idea to use pop can aluminum. I wondered how you got the corregated look. So smart! I am so impressed! You are so creative. These would make great address signs because they would weather really well. Oh the possibilities!
Very nicely done video! Thank you for your time and effort into making it and sharing your very creative idea. I just finished trying this technique and it came out awesome. I didn't have any of the wax on hand so I just clipped the aluminum letter in my Cricut tweezers, held it upside down and ran a lighter over the front side from underneath. It gave a cool effect. Just have to be very careful as the aluminum gets very hot but cools down quickly. Also have to be careful not to hold the lighter in one spot to long as it can start to warp and pull in on itself.
Thank You so much Becky Bert for your kind words. I love love your idea on burning with a lighter. I will definitely be using it. I'll bet it was a cool effect and thank you for sharing it with me. I appreciate it.
Saw you in a sub for sub thread, and you're so close to 1K! You're in a very interesting spot, as your kind of videos seem to be the ones that have a much higher watch time. Keep the quantity up, and I'm sure you'll reach the 4,000 hours of viewership more easily than the rest of us will!
Thank You EA40. Hoping I get that 4,000 before the deadline. Good luck I hope you hit the 1K and 4,000 hr before the deadline. Just watched yours and your very knowledgeable on the Bentley.
This is an amazing DIY clock! I want to make one with the Canadian flag too hehee. Maybe for next year, I think it will take ma long time to do. Plus I will need to buy a die cutting machine. But love this! Great reuse of waste. 😘
I used the Darice Embosssing Folder you can click here to find it on amazon goo.gl/JCAHss I also listed most of the items in the description. You just have to hit the show more to see it. Thank you for stopping by
Clear and concise. Easy to listen to you as you have everything ready to go and you know what you’re doing! Question re: blade. I heard you say blade style when you set custom. I’m not with my machine to check, is that the standard blade? Guessing it would be a good idea to set one blade for especially for aluminum?
Thank You for your kind words. Its the fine point blade (regular blade)
It was the antiquing for me…that’s what I was looking for! THANK YOU for showing me the magic! God Bless
You are so welcome!
Perfectly done
Thank You Creative Art
I love that this craft uses recycled materials! You never cease to amaze me with your creativity!
Thank You so much KC's Dollhouse
Awesome as always, I am enjoying working my way through your channel, full view and liked love mimi x
Thank You Mimi, I truly appreciate your support and I enjoy your video. so glad we became friends.
What a great idea. I never thought of using a cricut to do the metal. I love it! And what a super awesome idea to use pop can aluminum. I wondered how you got the corregated look. So smart! I am so impressed! You are so creative. These would make great address signs because they would weather really well. Oh the possibilities!
Thank You We Imagine for you support. Yes, that is a great idea on the address sign. love that idea.
Like#79. Enjoying this video again. We went into in-depth step by step instructions. Extraordinary results 😘💕🌹
Thank You so much Benny Wilson's World Wilson
Like#76. We see a empty pop can. You see recycling into a masterpiece. Shows you have artistic creativity 😘💕🌹😍😍😍
Now that really would be a cool DIY clock!
Thank You Annalisa's Awesome Adventures!!! glad you liked it.
Very nicely done video! Thank you for your time and effort into making it and sharing your very creative idea. I just finished trying this technique and it came out awesome. I didn't have any of the wax on hand so I just clipped the aluminum letter in my Cricut tweezers, held it upside down and ran a lighter over the front side from underneath. It gave a cool effect. Just have to be very careful as the aluminum gets very hot but cools down quickly. Also have to be careful not to hold the lighter in one spot to long as it can start to warp and pull in on itself.
Thank You so much Becky Bert for your kind words. I love love your idea on burning with a lighter. I will definitely be using it. I'll bet it was a cool effect and thank you for sharing it with me. I appreciate it.
That's pretty crafty! Like the short and sweet intro to the video. I need to make one soon! I subscribed!
Thank You Infringed for the kind words and for subscribing. going to check out your site out and I'll sub back
How Cool is That!! Great Video and Explanation! 👏 I Didn't Know About Using a Cricut on Aluminum. I Have a New Hobby. Thank you! 🙂
Glad it was helpful! Thanks for watching!
very creative video ‼️ I️ loved it keep up the good work 💯 just subscribed
Thank You for your kind words and stopping by. I just subbed u back
So amazing tips to make Tin Shed fonts. It's very useful. Love it. Big thumb ups 85
Thank you friend. appreciate your support.
That looks like so much fun!!
Thank You Persephone Beauty for stopping by and your kind words
Saw you in a sub for sub thread, and you're so close to 1K! You're in a very interesting spot, as your kind of videos seem to be the ones that have a much higher watch time. Keep the quantity up, and I'm sure you'll reach the 4,000 hours of viewership more easily than the rest of us will!
Thank You EA40. Hoping I get that 4,000 before the deadline. Good luck I hope you hit the 1K and 4,000 hr before the deadline. Just watched yours and your very knowledgeable on the Bentley.
Die cutting machines are so cool. 😊👍🏼
Yes, They are awesome. Thank You for stopping by 😊
This was really helpful :)
Thank You common nobody :)
Awesome video! glad you made it to 1k! Subscribed to your channel!
Thank You Prefitness Heading over to your channel and will sub and watch your video
Very creative
Thank you LatinTotal for stopping by and your kind words
Thank you for sharing such helpful tips.
Thank You so much
Your videos are very interesting that every time I watch until the end. A very creative tutorial. BIG LIKE:)
Thank You so much for your kind words.
Thank you for sharing. Fantastic and wonderful my dear friend.
Thank You Alfredo
Do the numbers/ letters have sharp edges after you are done cutting and embossing?
no I can rub my finger along edge and it don't cut it.
Wow!!! Look forward to seeing more of your videos
Thank You World of Stacey and Freddie
are the edges sharp when cut with a cricut. does it leave little pieces of metal behind?
I can run my finger along the edge and it will not cut it. It don't leave pieces of the metal on the item it cut Its a a clean cut.
Do you think this could be done with a Brother ScanNCut machine?
if it can cut metal it should work
What a helpful video well done👍👍👍
Thank You Sing
Welcome
✨💖⭐️ Happy New Year! ⭐️💖✨
Thank You Happy New Year to U
Great way to recycle the coke cans. Interesting.
Thank You Cup of spring
This is really cool!
Thank You Queen of Freebies
Awesome my friend, thanks for sharing. very creative :)
Thank You Celine`s Toy Surprise Box
This is an amazing DIY clock! I want to make one with the Canadian flag too hehee. Maybe for next year, I think it will take ma long time to do. Plus I will need to buy a die cutting machine. But love this! Great reuse of waste. 😘
Thank You Draw With Evellial and great idea.
Full ads watch :) this is so neat!! I always wondered how this was done. Impressive!!
Thank You House of eight
Superb, great job. Big thumbs up for this video👍58
Thank You ASA Technical
How would I take the name off the can, for example the word coke
You don't need to as that will be in the back and you would not see it. The inside of can is facing up
Amazing, well done! Thanks for sharing :) Huge 👍🏽 and Full View 💫🦉💫
Thank You
Uli Toys Review
appreciate your support
Very informative. I learned something new 👍🏼👍🏼😀
Thank You 100Years Apart
like#11!!!!! Nice video
Thanks for sharing~ my friend!!!! Have a nice day~^^
nice
Thank You All in One
Creative !
Thank You Taij Griffin
great video :) liked
Thank You FUN BB
awesome that is really cool :) like #102
Thank You
like 49! Very nice idea :)
The results are amazing but I'd be so afraid to even try this!
Thank You Annalisa's Awesome Adventures!!!
done
Great video sweet
Thank You
mantap videomu sobat. sukses untukmu. aku datang membawa komplit dan aku menanti kunjunganmu. salam sukses bersama
I am sorry I only speak english
nice video..you did diy? cool! :) just sub to your channel :D
If you could give me a shoutout in your next video that would be amazing!
What embarrassing plate did you use
I used the Darice Embosssing Folder you can click here to find it on amazon goo.gl/JCAHss I also listed most of the items in the description. You just have to hit the show more to see it. Thank you for stopping by