I did a similar thing on our old Scania when I was younger. It was on a crane mount, so I had to dig a ditch to get under the truck and do all the work from below. As a teenager you see everything as a challenge. I got it done in a day. Today I guess someone had to put a gun to my head to get it done 😂😅. It's hard work.
Gotta do pre trips every day and give it a good going over every week or so. You don’t lose all the oil from a differential through a wheel seal and not know it
Yeah it seemed kinda strange there wasn't more oil slung around underneath... Almost like that truck had done sat for awhile and they just pulled it out to make a video...
There wasn't any rear end oil because it had already slung it out 20K miles ago ! When you grenade a rear end like he did that wasn't done in 20 mile trips! What the heck! I know it's good to help folks out but your not getting paid to help people out that because of dumb decisions cost you money (way more money than necessary) because of their dumb decisions!
Definitely would like to see more logging. Video started off good then it changed quick. Thanks for tryi g to take time and make content just like the logging and equipment.
Their cost for a reman unit would be a hell of a lot more just for the part! I wouldn't think he could get a reman unit for $2100 the are probably going to jbbweld that same unit and flush it out fill it with gear olive and spray paint it and sell it back to him for $2100?😅
If he had been doing expections..he would have noticed a long time ago ...that's just basic stuff they don't teach in driver school..😅...just saying..rims dont lie......if you're axles leak 9 times of 10 will you'll see it on your rims......💯
Hate to see that happen to the fellow, but you got to keep up with maintaining your equipment and daily inspections help with preventing catastrophic break down.
Not on here to say that would never happen but that couldve damn near been avoided by doing a walk around inspection and not just checking the fluids under the hood. Takes quite some time for gear oil to leak out. Love the videos!
And I'm pretty good friends with 1 of the guys that own the saw mill right there near you. His a big time logger in blackridge VA. Would really like to come see that house your family is fixing up 1 day.
Like seeing the logging stuff on RUclips. Keep up the good videos. I'm from just down the road and have a mobile welding service. Welding on logging equipment and trailers for a long time if you ever need any help. I'm right by WestRock in Gaston if you ever need any work done.
I believe there is a gauge you can put on the instrument panel to tell you how much heat is in your diffs and how much heat is in your gearbox and how much oil is in the diffs and the gearboxes there is a set up that you can do that
Another fantastic video. Hope the gentleman can get his truck sorted and earning money again. Looking forward to seeing how he gets on. Keep the great video's coming. Regards from across the pond
Wow. Short video with only a subcontract truck being tore apart. Being from Virginia, guess I expect to see more work and longer videos of production and getting the work done instead of mechanic work videos and such short videos each week
I'm guessing they do a lot more wrenching than logging. If you're here to see timber movin, you'll probably be disappointed. If you're here for laughs, there's plenty to be had
12:23 Justin I realize that this is just a business venture when it comes down to it...but where do you find these folks from brother? I feel for you I mean it's like one step forward and two steps back and it's over what I would call the dumbest, unexcuseable , ignorant problems? You parted ways with your driver because of his ignorance, yeah a very rookie mistake sliding off into the ditch, but that's where you STOP a real knowledgeable driver at that point wouldn't do 5K + of damage! A contractor that dosent do simple preventive maintenance to his equipment dosen't need to have a pile of crap screwing up your tome and money? You don't limp a tractor 20 miles and run a rear planetary so hot and crack the housing like that ! Again another warm but that SHOULDN'T have his ass in a seat and shouldn't be screwing up costing you money? Brother you are such a awesome fella in several tough business and have the business smarts to succeed but what you need is a right hand leader with the years of the trucking industry, to handle and screen your drivers (both company and contractors) and the authority to hire and terminate them! If he knows the business he will from the looks of your videos Save you a lot of money, downtime and headaches and especially stress!!! Good luck and much more and better success in 2024! I personally have 40 years in the transportation industry 3.7 million safe miles, A recipient of North Carolina Trucking Association driver of the month (September 2021) and North Carolina Trucking Association Road Team Captain 2023/2024 currently serving! You are welcome to look up my bio and reach out to my email or give me a call if you feel I can help you with anything, I'm no Bobby Goodson but I do know the transportation industry thus far ? Not all but evidently enough considering the opportunities that the North Carolina Trucking Association thinks ? I get to go around our gret state and talk to the motoring public about commercial vehicles and safety driving around then ! Merry Christmas and Happy New Year to you and your family sir ! I hope you'll have a blessed 2024! markwillcox214@gmail.com
@@charleswalton5132 no he's a expert this wheel holder and his dumb truck owner should have done $20 worth of maintenance on this piece of crap truck to begin with along with having a real at least SOMEWHAT intelligent driver and he wouldn't be out of a rear-end or $2100 ?
@@brian_2040 yeah and that didn’t leak out over night! I check all oil levels once a week on the driveline, guess not everyone cares about $$$ or if that had of detonated at 60 going down the highway ad kill somebody?
Hate to watch that. Ive been around trucks and heavy equipment for a long time. Stuff like this is preventable but it sucks. Nit only is he out of a week of work but that $2100 in parts plus install parts and consumables. Based on what they were working on and with i say that's a really big ding on the bottom line for these guys.
HEY KEEP BOOBY GOODSON AROUND WE ALL LOVE TO SEE YOU ,& BOBBY WORKING TOGETHER.😊😊😊😊,
I give him credit for taking it out by himself it’s a lot of work and things happen it’s all apart of working in the woods . Happy new years to you 😊
I did a similar thing on our old Scania when I was younger. It was on a crane mount, so I had to dig a ditch to get under the truck and do all the work from below. As a teenager you see everything as a challenge. I got it done in a day. Today I guess someone had to put a gun to my head to get it done 😂😅. It's hard work.
nice to see you helping someone out when they need it good video
Gotta do pre trips every day and give it a good going over every week or so. You don’t lose all the oil from a differential through a wheel seal and not know it
Yeah it seemed kinda strange there wasn't more oil slung around underneath... Almost like that truck had done sat for awhile and they just pulled it out to make a video...
you got to do your pre trip
There wasn't any rear end oil because it had already slung it out 20K miles ago ! When you grenade a rear end like he did that wasn't done in 20 mile trips! What the heck! I know it's good to help folks out but your not getting paid to help people out that because of dumb decisions cost you money (way more money than necessary) because of their dumb decisions!
The rust at the crack doesn't appear overnight...
Definitely would like to see more logging. Video started off good then it changed quick. Thanks for tryi g to take time and make content just like the logging and equipment.
Im just disappointed we didn't get to see Rollin Coal Mobile Mechanic Service on the scene
Their cost for a reman unit would be a hell of a lot more just for the part! I wouldn't think he could get a reman unit for $2100 the are probably going to jbbweld that same unit and flush it out fill it with gear olive and spray paint it and sell it back to him for $2100?😅
thank you
love the channel bud just found few weeks ago be safe out there
If he had been doing expections..he would have noticed a long time ago ...that's just basic stuff they don't teach in driver school..😅...just saying..rims dont lie......if you're axles leak 9 times of 10 will you'll see it on your rims......💯
Do a video every day. Oh bobby Goodson need to be on your team .sure miss watching his videos. Too.
I hope they're pulling those hubs off to check the axle bearings.
Naw they'll be good just keep er movin
Why bother if they ran it long enough to grenade it the way they did?
Always awesome Videos. Happy New Year.
Man I’m really enjoying this series keep up the good work buddy you gonna have good weeks and bad weeks just all part of it
Like the man said, that's logging, there's always something. 👍
Another great video sir keep up the good work
Another great vdeo!! Thanks for sharing!!
Happy new years to you and your family
Respect to you and all your people Great Videos.
I like to wish you and your family a New Year's Eve.
Great video thanks for sharing
My lord that buncher seems about sick cutting that timber.
Nice video. Happy New Year.
Let's go
Hate to see that happen to the fellow, but you got to keep up with maintaining your equipment and daily inspections help with preventing catastrophic break down.
Not on here to say that would never happen but that couldve damn near been avoided by doing a walk around inspection and not just checking the fluids under the hood. Takes quite some time for gear oil to leak out. Love the videos!
And I'm pretty good friends with 1 of the guys that own the saw mill right there near you. His a big time logger in blackridge VA. Would really like to come see that house your family is fixing up 1 day.
Like seeing the logging stuff on RUclips. Keep up the good videos. I'm from just down the road and have a mobile welding service. Welding on logging equipment and trailers for a long time if you ever need any help. I'm right by WestRock in Gaston if you ever need any work done.
Another whole video about a truck that is broke down.
I believe there is a gauge you can put on the instrument panel to tell you how much heat is in your diffs and how much heat is in your gearbox and how much oil is in the diffs and the gearboxes there is a set up that you can do that
After the money and work i would check my fluids a little more often. Good job doing the work himself though.
That’s a rough way to work on something dude got it out though
Badass videos let’s go
He gonna make it
Take some of that damn fluid and give that 5th wheel with a little love of something, hell anything.
What kinda dogs you run
👍👍👍
Another fantastic video. Hope the gentleman can get his truck sorted and earning money again. Looking forward to seeing how he gets on. Keep the great video's coming. Regards from across the pond
👍
I feel sorry for that fellow, that sucks when you have to work so hard and it costs you big money. What kinda hounds are you hauling in you box?
As a driver you must keep an eye on these things before it gets catastrophical. It must have dripped oil for some time.
Wow. Short video with only a subcontract truck being tore apart. Being from Virginia, guess I expect to see more work and longer videos of production and getting the work done instead of mechanic work videos and such short videos each week
I'm guessing they do a lot more wrenching than logging. If you're here to see timber movin, you'll probably be disappointed. If you're here for laughs, there's plenty to be had
How far away from Danville Virginia and South Boston area are you???
Thats a hard way to work on a truck out in grass and not in a shop. Hate that for the truck owner and driver.
Have equipment blocking the front of my shop infront of the door. Other wise he could have taken it there to work on.
more drama then a school Girl < Bobby>Justin > !!!
TimbeR!!!
Man what happened to swamp loggers i grew up watching that and highway thru hell
Bidenomics happened and Swamp Loggers shut down.
Kinda sad seeing some of Bobby's old equipment
Too bad inspecting the brakes isn’t part of the pre-trip inspection, the driver could have caught the oil on the brakes and tire.
Sounds like he needs to learn how to do a pre trip so he would notice a wheel seal out.
why not just put the rear diff in the pickup with the excavator 🤔
12:23 Justin I realize that this is just a business venture when it comes down to it...but where do you find these folks from brother? I feel for you I mean it's like one step forward and two steps back and it's over what I would call the dumbest, unexcuseable , ignorant problems? You parted ways with your driver because of his ignorance, yeah a very rookie mistake sliding off into the ditch, but that's where you STOP a real knowledgeable driver at that point wouldn't do 5K + of damage! A contractor that dosent do simple preventive maintenance to his equipment dosen't need to have a pile of crap screwing up your tome and money? You don't limp a tractor 20 miles and run a rear planetary so hot and crack the housing like that ! Again another warm but that SHOULDN'T have his ass in a seat and shouldn't be screwing up costing you money? Brother you are such a awesome fella in several tough business and have the business smarts to succeed but what you need is a right hand leader with the years of the trucking industry, to handle and screen your drivers (both company and contractors) and the authority to hire and terminate them! If he knows the business he will from the looks of your videos Save you a lot of money, downtime and headaches and especially stress!!! Good luck and much more and better success in 2024! I personally have 40 years in the transportation industry 3.7 million safe miles, A recipient of North Carolina Trucking Association driver of the month (September 2021) and North Carolina Trucking Association Road Team Captain 2023/2024 currently serving! You are welcome to look up my bio and reach out to my email or give me a call if you feel I can help you with anything, I'm no Bobby Goodson but I do know the transportation industry thus far ? Not all but evidently enough considering the opportunities that the North Carolina Trucking Association thinks ? I get to go around our gret state and talk to the motoring public about commercial vehicles and safety driving around then ! Merry Christmas and Happy New Year to you and your family sir ! I hope you'll have a blessed 2024! markwillcox214@gmail.com
gotta pretrip this is why
Well that was completely owner operator failure nothing to do with logging!🤦🏼♂️🤷♂️
Typical driver, I bet he said it never made any noise...he didn't know it broke
@@truthbetold2914. You’re a typical armchair expert I see!
@@charleswalton5132 no he's a expert this wheel holder and his dumb truck owner should have done $20 worth of maintenance on this piece of crap truck to begin with along with having a real at least SOMEWHAT intelligent driver and he wouldn't be out of a rear-end or $2100 ?
I know it's easy to sit back and say "pre-trip on the truck would have showed him he had a issue.
@@brian_2040 yeah and that didn’t leak out over night! I check all oil levels once a week on the driveline, guess not everyone cares about $$$ or if that had of detonated at 60 going down the highway ad kill somebody?
Hate to watch that. Ive been around trucks and heavy equipment for a long time. Stuff like this is preventable but it sucks. Nit only is he out of a week of work but that $2100 in parts plus install parts and consumables. Based on what they were working on and with i say that's a really big ding on the bottom line for these guys.
Very poor maintenance of machinery causes very big problems in amateur set ups
Indian 😂mechanics would fix that whole piece