Is that 4 or 5 piston rings? I saw the kubota had 4. Which is definitely impressive for such small engines. Someone thought it was odd, but I said being a side shaft engine it would make alot of sense.
Very nice video. I have the same engine in India which my grand father was using for agriculture. I am planning to restore it this summer. Can you please share the model number for governor and link to buy head gasket? Governor broke and engine haven't moved in 30 years.
我记得中国人的历史题材电视节目种常说,曾经的日本是学习西方工业的优等生。 中国人の歴史を題材にしたテレビ番組でよく言われています。かつての日本は西洋工業を学ぶ優等生でした。 나 는 중국인 들 의 역사 제재 텔레비전 프로그램 에서 흔히 말 했 듯 이 일본 은 서양 공업 을 공부 하 는 우등생 이 었 다.
お疲れ様です。ピストンリングって、部品でるんですね~。びっくり!!
Yanmar and Kubota are good quality machines! Useful video, thank you!
Thank you!
Nice job, as always! These are the videos i like best. Thank you for the entertainment.
Thank you ;)
Nicely done, great work!
Thank you!
I would love to see a full rebuild and paint of a unit like this
I love your work done in seiza position!
Thank you ;)
Great job!
Thank you ;)
Boa tarde guerreiro aí sim mais um reparo bem feito e concluído parabéns 👏👏👏🇧🇷
Obrigado ;)
Well done, so nice work. 🙏
Thank you!
Excelente trabajo saludos desde Argentina
¡Gracias!
Nice job! As allways!
Thank you!!
I think this was the smallest liquid-cooled engine Yanmar made.
Hi, the videos are always amazig, I love these Diesel engines, I restore some also 😉 I always look 5 times each of your videos !!
Thank you!!
这样的勤快。
That oil from the sump looked very thin. Was there fuel in it?
Always like your fuel tank cleaning. Looks like hard work.
Thank you ;)
Yes, fuel seems to have gone into oil.
こんな圧縮すかすかなエンジンよく直しましたね、流石です…
水のようなオイル、錆び始めてるシリンダー、パキパキのピストンリング、凄まじいですね
元気に回ってる姿を見ると嬉しくなっちゃいます
いえいえ、ありがとうございます。
圧縮が戻ってくれるか心配でしたが、何とか無事に廻ってくれました。
Bravo!🎖
Thank you!
Is that 4 or 5 piston rings? I saw the kubota had 4. Which is definitely impressive for such small engines.
Someone thought it was odd, but I said being a side shaft engine it would make alot of sense.
Six rings. Three compression rings, one oil control ring and two bearing rings on the bottom.
Could you tell me the model of this Yamar engine, thanks alot.
Very nice repairs on the old machine.one question what is the device you use to boar the piston housing out with 😀👍👍
Google for "honing tools for cylinder", you'll get a whole range of those...
Patrick thank you for letting me know regarding the honing tool for the cylinders a very good range thank you take care 😀👍
Yes, thank you!
Play at 2X speed , it will save your time
Very nice video. I have the same engine in India which my grand father was using for agriculture. I am planning to restore it this summer. Can you please share the model number for governor and link to buy head gasket? Governor broke and engine haven't moved in 30 years.
だいぶ使い込んだプーリーですね😊❗️
ですね~
Мое уважение. Really nice
Благодаря ти!
@@garakutadou maybe you can use English answering me, so i have question, is there a cylinder-head gasket?
@@blindnumbemotions981 Yes. It is installed at 8:20.
@@garakutadou thanks
Excellent, cualificación AAA++++
Grazas!
うわーそれを修正することができます
It look like they copy Petter diesel engine from Punjab
Konbanwa from Indonesia 😀
Terima kasih!
@@garakutadou Sama Sama
일본에는 오래된 기계가 참많이있네요. 일찍 서양문물을 받아들여서 그런거 같기도 하네요..
我记得中国人的历史题材电视节目种常说,曾经的日本是学习西方工业的优等生。
中国人の歴史を題材にしたテレビ番組でよく言われています。かつての日本は西洋工業を学ぶ優等生でした。
나 는 중국인 들 의 역사 제재 텔레비전 프로그램 에서 흔히 말 했 듯 이 일본 은 서양 공업 을 공부 하 는 우등생 이 었 다.
部品はどうやって入手してるんですかぁ🙋❔
ダメなエンジンから外して使います。
Bom dia guerreiro tudo bem o que aconteceu não tá tendo mais reparos e nem vídeo
我楽多道さんはお店かなんか経営してるんですか?
以前ここのチャンネル名が“リサイクルショップ我楽多”だったのですが、ググってみたら出てきましたよ
大したものではありませんけどね。
こんばんは。
早速ですが、質問させてください。
発動機内部のピストンのクランクシャフト?下辺りにあるオイルを吸い込んで各部に回す?ための、ラッパ状の吸込み口が途中でネジ切れて破損しているようなのですが、部品名や役割など教えていただけませんか?宜しくお願いいたします。
こんばんは。
オイルフィルターのことでしょうか。
お返事ありがとうございます。途中でも切れているのですが、どうしたらよいでしょうか?アイディアなど、お力添えをいただけると幸いです。宜しくお願いします🙇
@@user-wz1jr8vr6v
交換がベストですね。
切って継ぐのもできなくはないと思いますが…
部品、もうないですよね?
部品取り以外は…
そうですね、アドバイスありがとうございました☺️
懐かしいヤンマーエース、T65型エンジン。果たして、復活するのでしょうか。
ありがとうございます。
Dhss
Здравствуйте!На поршне 4 компрессионных кольца и 2 масло съёмных . А между головкой и гильзой цилиндра есть прокладка?
Судя по всему паранит
@@blindnumbemotions981 Прокладка есть ?На видео не видно когда она ставилась.
@@user-ji3br2zl5t я тоже не увидел, но на подобном движке ставил и работает исправно (при разборке оригинальная порвалась
Да, он уже установлен в 8:20 :)
👍😁⭐⭐⭐⭐
Ok.....vietnam
Cảm ơn bạn :)
オイルがシャバシャバですね
何か原因有るのですか
燃料ポンプから燃料が流入したのではないかと思われます。
Xin chào tôi đang xem
Cảm ơn bạn ;)