How To Vinyl Wrap A Car - Interior Trim | POV Detailed Guide | Step By Step

In this video I show you how easy it is to vinyl wrap an interior trim piece / console to change the look from OEM woodgrain to a sleek brushed metal. The interior piece is from a Chevy Traverse, but this process applies to any interior trim piece. The vinyl used for this project was 3M Brushed Titanium.
Get this vinyl 3M vinyl at this affiliate link: amzn.to/3y1Yy4Z
Get other vinyls for your vinyl wrap projects at these affiliate links below:
Avery Gloss Black Vinyl Wrap (enough for most hoods or roofs): amzn.to/2FRKaWQ
3M Gloss Black Vinyl Wrap (enough for most hoods or roofs): amzn.to/3mFnnyf
3M Gloss Psychadelic Flip Vinyl Wrap: amzn.to/3iQCQZh
3M Deep Matte Black: amzn.to/37EBNtA
Vvivid Designer Triangle Carbon Fiber Vinyl Wrap: amzn.to/3uDgm5d
Vvivid True R Black Carbon Fiber Vinyl Wrap: amzn.to/3iPeBf0
Vvivid Black Indestructible Vinyl: amzn.to/33J5BSh
Vvivid Black Leather Vinyl: amzn.to/2ZWr1Kq
Vvivid Black Stealth Camo Micro Pattern: amzn.to/2EmGLPu
Vvivid Black Stealth Camo Medium Pattern (1’x5’): amzn.to/2TmFxHF
Vvivid Black Stealth Camo Large Pattern (1’x5’): amzn.to/3oqlxlR
Vvivid Black Stealth Camo Large Pattern (5’x25’): amzn.to/2HE9Hn6
Vvivid Black Stealth Camo Large Pattern (5'x50'): amzn.to/3mjPlie
Vvivid Matte Demon Black: amzn.to/2GEJWmE
Vvivid Black Rainbow Sparkle: amzn.to/3n5ui3e
Vvivid Matte Metallic Black: amzn.to/3p3tiyB
VViViD+ Kevlar Blue High-Gloss Vinyl Car Wrap (1ft x 5ft): amzn.to/3aXq1fy
VViViD+ Kevlar Red High-Gloss Vinyl Car Wrap (1ft x 5ft): amzn.to/38URH1U
VViViD+ Kevlar Green High-Gloss Vinyl Car Wrap (1ft x 5ft): amzn.to/3hBd4th
VViViD Ultra Gloss Racing Red: amzn.to/3nuIX7R
VViViD Ultra Gloss Light Nardo (Chalk) Grey: amzn.to/35pZ9RW
Need tools for your vinyl wrap project? Get them here at these affiliate links.
WRAP TOOLS:
REV Brand Heat Gun: amzn.to/2Hm955P
3M Blue Squeegees: amzn.to/3mHuI0C
3M Gold Squeegees: amzn.to/3mNQeAO
Monkey Strips felt buffers: amzn.to/3v2feaQ
Banana Buffers: amzn.to/3stHH7H
Ehdis Fabric buffers: amzn.to/3ecInt0
Micro-squeegees: amzn.to/2Sofkbn
3M Finish Line series Knifeless Tape: amzn.to/32N6Ctd
3M Design Line series Knifeless Tape: amzn.to/3ckvGuW
Vvivid Utility Knife: amzn.to/35WVZ99
Olfa Stainless Steel Body Utility Knife: amzn.to/2RKAgsQ
NT Cutter A553 Yellow Plastic body knife: amzn.to/3alSUkh
NT Cutter 30 Degree Snap Off Blades for Utility Knives: amzn.to/3cfTiRf
Olfa 30 Degree Snap Off Blades for Utility Knives: amzn.to/3kM1Brd
Vvivid Wrap Gloves: amzn.to/33KfBe2
Benzomatic Torch Head: amzn.to/3qxCfAJ
DeWalt 9’ mini magnetic tape measure: amzn.to/2P4pOyG
Stanley 12’ tape measure: amzn.to/2QB6jxY
Tool kit pouch: amzn.to/3mXj8yG

[@fishandreptileinfo]

Nice job.

[@ColorChangeCustoms]

Thanks and thanks for watching!

[@sharstohlman2936]

I like the wood too. But I just bought a denali and that wood grain is like Green...yuk. so does any one know it the sell either marble or wood grain that's black to replace it. I don't want it a solid color. Thanks all!

[@marklengal9990]

What about a bezel from a jag or Benz with small switch holes, some areas of the bezel only have 1/8 of plastic between switches. Do I still attempt to wrap around the edge or straight cut and leave the edge ?

[@ColorChangeCustoms]

Sorry for the late reply. In that case, I might just wrap over and cut out the holes. I might then use some sort of coloring on the insides of the small holes (black paint, plastidip, or even sharpie LoL!) so the original color doesn't show through when you put the trim back on.

[@marklengal9990]

Have you ever done the g35 console and hvac switch area? I’m trying to do that now and all the little button wholes are tuff.

[@ColorChangeCustoms]

No, I've not done that in particular. Small holes are tough...sometimes, it may be better to just cut them out at the edges and use some sort of coloring on the inside of the hole (like paint or plastidip)

[@haygood9]

Can i send u the pieces i want done and pay you to do it for me???😊

[@307_Scoot]

could you use 651 or do you recommend 3m

[@ColorChangeCustoms]

Use an automotive cast vinyl. 651is a calendared craft vinyl mostly intended for decals and flat surfaces, not wrapping in this respect. I’d recommend vinyls like Vvivid XPO and Premium+ series, 3M 2080 (and older 1080) series, and Avery SW900 series of automotive wrapping cast vinyl.

[@307_Scoot]

@@ColorChangeCustoms thanks

[@helpmefixthis9117]

Woodgrain look is so much better

[@tamonthompson7599]

How long will it last

[@Assrael_sucks]

I got my side mirrors carbon fiber vinyl wrapped. Its been over 3 years and the wrap is still as good as new.

[@Xplorer228]

Is it removable? How hard to remove?

[@ColorChangeCustoms]

Yes, I used automotive vinyl wrap, which is designed to be removable. It's fairly easy to remove depending on how long it's been on.

[@15DurangoRT]

Yikes

[@cmorebutts7337]

i have a TRADESMAN and broke the bezel when switching out the brick radio for an android carplay. ebay asking 150.00 for a used bezel. i am hoping i can reset the piece i glued back in as it is uneven and the use a carbon looking vinyl wrap.

[@ColorChangeCustoms]

Thanks for watching! Hopefully it works out.

[@malcolmbeegle3093]

Horrible!