wood window locks - key making - impressioning
HTML-код
- Опубликовано: 6 сен 2024
- In this video we are going to take a look at, and make keys for, a wood double hung window lock. These locks were typically found on older houses and sometimes called sash locks.
I had a house just a few weeks ago with about 20 of these on them and every single one, painted over one way screws so no choice but to make keys by impressioning. Customer had a very typical 1980’s add on to the house so there ended up being three different keys for all of his. Luckily most were on one key (the originals)
So no, one key doesn’t work them all for those consumers that are invariably going to send me a email asking for a key to be mailed to them. Call a locksmith, if they don’t know how show them this video (which will probably piss them off)
People don't think Jason's impressions are funny but they pay him well to do them. 😂
Your videos are great. I'm working on being a residential/commercial locksmith and your videos are the most informative that I've found for that. Thanks
Great Job. You Are A Modern Times Hank Spicer. The Original Filing For Dollars Master Locksmith. 👍
I took Hank Spicer classes back in the day. He told us his daughter impressioned a GM sidebar lock.
Always neat! I get these type of lock requests..problem is no body wants to pay for it or my time.” Well I can just buy me another one of them locks for $10.00 at the hardware store” ( exaggerated but you get the point)
I really appreciate this, I struggle with impressioning but it's a skill I need to learn
This is a great skill you mastered Jason. I have done very little impression but you made it look easy and fast Thanks for sharing
I've practiced but have never really done well with impressioning. Skill indeed!
Hey Jason love watching your videos just a thought I had
A Ford ignition with after market code I took my Curtis
Clipper set all the cuts to# 1s to get the right spacing as
A starting point I'm not good at impressioning I use black
Marker on key edge instead of smoking to get the pin
Marks keep up the good work your videos motivate me
To keep doing locksmithing I'm now in a wheelchair and
No longer run a service truck with I miss thanks what
About dismantling the lock there must be a retainer holding the plug in there just a thought
Wow that glass is a real pane to work around! Great video as always Jason, thanks for showing this 😊👏 P.s. - would definitely be interested in seeing the Peter Fox holder in the store! 😊
Great video. I remember having these latches on our windows growing up, but I have never seen one with a lock before. I can just imagine trying to impression one next to what I suspect is thin single pain glass.
For some of us that aren't as lucky as guessing how far down and over a 3 is in position 4, another way to do this would be to use our code machine and just take the first mark which looks to be in position 3 and cut a one depth there, if it marks again, cut a two depth there, etc. I find it really hard to nibble a small amount using the Lishi cutters. In my younger days, the masters would do it exactly as Jason did, but if it wasn't smooth enough they would just file the top of the plug until it became smooth, which of course increased the number of operating keys a scosh. As always, thanks Jason for sharing your knowledge.
I always used a file. After it was made I would try to cut the key by code. If not I would just copy the key on a new blank and send them on their way. I'm an automotive locksmith since the 80's. I was great at impressioning not so good at picking locks. Sadly we don't impression car locks any more. I still have my Framon impressioning handle. Now we just either call in for codes or get it from NASTF. Of course after that program the transponder. If you told me this is where it would end up in the 80's I wouldn't have believed it. We make a lot more money but I kind of miss the old days. Curtis clippers and my Framon #2.
Great video! Thanks Jason!
I saw an old forum thread I believe it was where he made 6 of those Lishi Duplicators and they were stamped 2018. It looked like that batch were done in more or less a small machine shop and he made some before that using a drill press, hack saw and other hand tools. I always wanted to build one as he posted measured plans and later and some cad drawings. Vice Grips work, but the Fox Duplicator is certainly better and to me it has a huge cool factor.
Nice super informative thanks Jason!
Another great video there sir.. I'm still working on getting better using the Lishi cutters for impressioning smaller keys... I do hope y'all start to sell that clamp that you used in the Lishi Cowboy video , it will help .... Keep up the good work ....
I am impressed as always :)
Very nice - Good Job
Nice video.
Market the clamp 👍
Thanks! Interesting. *Double* Hung windows, *No* "fixed" window, *BOTH* move. : } yes?
*Hi!* Update: I get it now, you were speaking of LOCK, Not window. oops "This" = lock part. sorry
lol Words took wrong turn again in my head, perhaps lost [key]. cheers!
would scope with a scope or even an endoscope.