your work and tutorials are really useful and great but it lacks one important thing, we would love to see results of every installation and how they work, i.e. show how it looks when lights are on. Thanks
I just installed the tint vinyls on my 2017 GT but I noticed after a couple of hours, the tail lights had what appeared to be moisture when they are lit. Not sure if that will go away after a few days or what. Really hoping that I don't have to redo my lights.
@Bill Tumas .. I am about to get this for mine, I dont see individual pieces on the site. If I screw up one of them, are individual pieces available to purchase if we already purchased the whole kit? Or do you give the vendor info with the kit to order just one piece from them?
This may be a dumb question, but say u wash your car regularly, would this change the position of the tint? I normally use car wash and water and dry with microfibre. Thanks!
Who Would I Contact If I Have a Tail Light Idea That Can Really Change And Alter The Look Of The 2015 Mustang Which Would Provide More Profit On Their End? Thanks
Hey bill, great vid's...I looking to add a Shelby gt350 stripe kit (from ford parts) to my 2016 Shelby gt350 stripe delete car...a detailed video help greatly...thx
I always thought "murdered out" should be red splatters all over the car like it was shot it stabbed to death. I still don't know what blacked out has to do with murder.
it's a great hack, execive water use making mess leading to contamination on the install and uncomfortable work area, wrong water mix, execive use of the heat gun, any respectable ppf "wet application film" knows is too much soap in that mix the less soap the more TAC on the film minimizing the use of heat guns to that degree, keys are good film a good installer, failed on the lower fog lights I might be over critical do to being a ppf and window film pro
Google best water mixed for ppf application, some use 70% alcohol and baby shampoo, how much slip and tac depends on the temperature of the surface on plastic surfaces it requires less soap and more alcohol
for a full spray bottle put about a shot glass of 70% isopropyl alcohol it will make the full bottle about 5% alcohol content then add three teardrops of baby shampoo and that's a mix remember the more soap the more slip the more alcohol the more tac
your work and tutorials are really useful and great but it lacks one important thing, we would love to see results of every installation and how they work, i.e. show how it looks when lights are on.
Thanks
this
want this kit but I live in Comufornia where they crack down on all kinds of mods. Anyone have any issues in California with any violations?
Beautiful effect. But I would have to get it done for me. I dont have the patience!
MrMrwilson11 do it on the weekend
Yes thank you Bill!!!
Do you guys have a video on adding racing stripes?many thanks
I just installed the tint vinyls on my 2017 GT but I noticed after a couple of hours, the tail lights had what appeared to be moisture when they are lit. Not sure if that will go away after a few days or what. Really hoping that I don't have to redo my lights.
Brandon McMillan how is it??
@Bill Tumas .. I am about to get this for mine, I dont see individual pieces on the site. If I screw up one of them, are individual pieces available to purchase if we already purchased the whole kit? Or do you give the vendor info with the kit to order just one piece from them?
This may be a dumb question, but say u wash your car regularly, would this change the position of the tint? I normally use car wash and water and dry with microfibre. Thanks!
+Rick Kaler Not at all, once it dries it is on there pretty good.
Who Would I Contact If I Have a Tail Light Idea That Can Really Change And Alter The Look Of The 2015 Mustang Which Would Provide More Profit On Their End? Thanks
Bill, great videos! Are the tints legal?
+Nguyenwins Depends on your area, headlights typically are not
I have a question. After putting the tint, when washing the car the tint won't move?
+jose miguel morla simon no once it dries it will not come off unless you want it to
ok thanks
+jose miguel morla simon It's just like a screen protector on your cellphone. So it won't move.
Where i can buy one kit
What's the tint percentage
Top how to show for mustang love it 👍
Hey bill, great vid's...I looking to add a Shelby gt350 stripe kit (from ford parts) to my 2016 Shelby gt350 stripe delete car...a detailed video help greatly...thx
4-6 hours bill you're killing me lol. Can you do it for me
+Rob57664 Sure but I am very expensive :)
I have a 2016 V6 base model, will those tint vinyls fit?
+Alex Miranda yes but you want the kit without the 50th tails
Get a real car bitch
can i use a girl hair dryer if i cant get access to a heat gun bill??
Yes you can, the process will just be a little slower
I always thought "murdered out" should be red splatters all over the car like it was shot it stabbed to death. I still don't know what blacked out has to do with murder.
Drives down the street
Gets pulled over
is it legal?
+julius ceasar Yeah, they dont decrease light output at all
14:36 Looks like shes crying
it's a great hack, execive water use making mess leading to contamination on the install and uncomfortable work area, wrong water mix, execive use of the heat gun, any respectable ppf "wet application film" knows is too much soap in that mix the less soap the more TAC on the film minimizing the use of heat guns to that degree, keys are good film a good installer, failed on the lower fog lights I might be over critical do to being a ppf and window film pro
So your saying less soap? About to order a kit possibly and any tips are greatly appreciated..
Google best water mixed for ppf application, some use 70% alcohol and baby shampoo, how much slip and tac depends on the temperature of the surface on plastic surfaces it requires less soap and more alcohol
I would have thought that alcohol over spray would be bad for the paint or trim?
for a full spray bottle put about a shot glass of 70% isopropyl alcohol it will make the full bottle about 5% alcohol content then add three teardrops of baby shampoo and that's a mix remember the more soap the more slip the more alcohol the more tac
the alcohol level would be so low it wouldn't harm the paint but you also need microfiber rags to whipe off excess water