For you guys that are concerned about bubbling in the tint you don't have to worry since it's vinyl. I have a few vinyl things on my Mustang that I installed myself and didn't have any experience with it and at first I had a couple of small bubbles but they disappear within a day because vinyl has really small holes that you can't see and the air will escape and it'll look perfect after that. So don't worry if you have no experience working with vinyl tint and it looks a little bubbly at first. It'll fix it's self.
+KingPNW Yes most of them will come out if they are small enough. One more pass with a heat gun would have fixed that one for sure, its tough to see them sometimes with the lights in the studio.
Hey Bill did you spray the soap water on both sides or just the side that is applying to the light? I'm sure it's not a big deal just wanna do it right.
terrible the reason I am so critical is because I am a window tint professional also a paint protection film professional the installations had excess water use leading to contamination and an unsafe working area also excessive use of a heat gun that can lead to paint and film damage on the vehicle also wrong use in the mixture of water too much soap there was no use of alcohol or proper squeegees very simple problems can be fixed by something as easy as adding alcohol to the mix Pros know those that don't know don't. I guess I'm being critical because of my standards.
God damn dude. You should settle down and get a bit more critical with your grammar. He didn't say you had to do it this way, it was just an example and generic tutorial to showcase their product.
For you guys that are concerned about bubbling in the tint you don't have to worry since it's vinyl. I have a few vinyl things on my Mustang that I installed myself and didn't have any experience with it and at first I had a couple of small bubbles but they disappear within a day because vinyl has really small holes that you can't see and the air will escape and it'll look perfect after that. So don't worry if you have no experience working with vinyl tint and it looks a little bubbly at first. It'll fix it's self.
Just bought this kit 😊
There was a "finger" left in the lower rear valance application. Will that disappear with time?
+KingPNW Yes most of them will come out if they are small enough. One more pass with a heat gun would have fixed that one for sure, its tough to see them sometimes with the lights in the studio.
Looks Good! Can I take it to a regular tint shop so they install it for me?
+NGS_NUKEZ I tried today and they said they dont want to be responsible to anything that goes wrong with it
I did the same and tried charging 400$.. I was like nah haha
lots of bubbling!
Hey Bill did you spray the soap water on both sides or just the side that is applying to the light? I'm sure it's not a big deal just wanna do it right.
+mike peifer Just the side that will be adhering to the lens
Great guide but to much fluid can stop the tint vinyl from sticking so be careful.
Think I'm gonna give this a try on my 15 GT. Anyone know if this is legal in AZ? I looked it up but just making sure I'm reading it right.
Could I use a hair dryer?
Yes
+Bill Tumas cool, thanks man.
Will this fit the Australian model
the lights are all physically the same size so yes it will
is this 50 state legal?
+bozz302 probably not
i think its illegal on all states for the front lights, i had this for about a year and haven't had any problems yet
It is legal, it barely tints.. it’s not as dark as you think
Not sure if I like the look of the tinted headlights
is it legal
its easier to plasti dip the side markers and reflectors
CZA4V Just NO.
That's retarded plastidip doesnt allow light through like a tint does
why you would tint your headlamps is beyond me........
Its for looks and doesn't affect light output if its only a light smoke tint.
Not really an 4-6 hours job lmao. Most is an hour.
terrible the reason I am so critical is because I am a window tint professional also a paint protection film professional the installations had excess water use leading to contamination and an unsafe working area also excessive use of a heat gun that can lead to paint and film damage on the vehicle also wrong use in the mixture of water too much soap there was no use of alcohol or proper squeegees very simple problems can be fixed by something as easy as adding alcohol to the mix Pros know those that don't know don't. I guess I'm being critical because of my standards.
God damn dude. You should settle down and get a bit more critical with your grammar.
He didn't say you had to do it this way, it was just an example and generic tutorial to showcase their product.
“Pros”!
As with everything else on youtube, this video would be so much better without the stupid music.
We have tried them without the music and everybody hates that too :)