OmniLogic Configuration Setup Part 1
HTML-код
- Опубликовано: 20 дек 2021
- Tech training video of how I set up a new pool's OmniLogic configuration programming.
NOTICE: Do not take the front panel off of the Omni like I show in the video. You should not have to do that to test the relays and program the system.
I do it because sometimes I have to change something in the wiring or verify the wiring in the box was done correctly. Also I have my appliance electrical license in the state of Texas. But even a master electrician risks his life when handling electricity and can die if he is not diligent with being careful and constantly aware of what he is doing when electrical wires are live. Thus ends my public service announcement about electrical safety. Thank you.
Is there a set of instructions to adding a chlorinator to an existing configuration? Already have the heater, lights, and pump added and just need to add the chlorinator - it has been wired.
Thanks!
I think I cover it in my video either part 1 or part 2 of when you have the option to add it during the configuration. Otherwise go to Hayward's site to download the setup instructions.
WHAT A HEADACHE
Yep it's a lot.
Hello! My remote relay just lost communication to the wiring hub. Any advice? Thanks in advance.
Reboot system, if still no, try another relay bank.
Please correct the line wiring to the Omnilogic. Double pole GFCI is not UL listed for that back feed setuo
You seem to be talking about the electrical wiring in the Omni, which an electrician wired, not me. The purpose of my video was to understand the configuration of the OmniLogic.
Hey great video but pump running in background is ruff to listen too
Sorry about that.
You should turn off your pump. We can’t hear nothing!!
Sorry, turn it up loud.
volume...mumbles
You will have to turn it up.