Fantastic job Mike!!! Thanks to your video I was able to change easily, the right side wing of my SL300 . Just a doubt. Originally, the space in this wing area over the wheel, In wich colour was painted? Chasis colour? Black? Best regards from Spain
Thanks for your comment - glad to hear you managed to change your wing! The wheel arches were generally painted black. On my red 280SL which was stolen, someone had painted them red (the chassis colour - it looked OK but was not correct) Mike
Mike. How did you manage to fit non original wings onto the car. I have some reproduction wings and they will not fit at all. The distances between the fixing holes near the door are not the same as the original. Any advice?
Sorry to hear you are having problems fitting repro wings. What is the make model and year of your car?....and where did you get the wings? The reason for asking is that the shape of the wing may have changed slightly...I found this when trying to fit the headlights to my now stolen 280SL. I must confess that the new wings I had fitted to that 280SL were fitted by a body shop and not by me...but they never said they had any problems. Mike
Hey Mike. I was thinking about removing my passenger side wing but I was looking around it and there is like three inches of weld at the front on top where the cross bar goes to the other fender wing. Do you know what I’m talking about? I wish I could show pictures of it now.
Hi - you can send a picture to m_scott65@hotmail.com and let me know via this channel when you have done it. I don;t look at that email unless I am expecting something. Mike
Hey Mike, At 4:174:18. Where can I get those clips? I looked and looked online and what I found looked like what I needed and they look too wide. Let me scrub the video and see if you linked it at the end of the video. Thanks
Hi - I believe they are part number A0009945645 as per the diagram shown at: mb-teilekatalog.info/view_SubGroupAction.php?lang=E&mode=BM&class=1&aggtyp=FG&catalog=048&model=107042&group=88&subgrp=015 You can get them at the SL Shop if you are in the UK: parts.theslshop.com/headlamp-fastener-blower-motor-cover-mounting-clip-0009945645/ Mike
Happy New Year Mike! Wish you and your family all the best. Looking forward to more of you great videos. Will you remove both fenders? You should probably remove the engine as well and do a complete "rust bath" restoration of the front section in classic Mike's Mercs fashion, making everything look like new or better than new.
Happy New Year to you! Once again, you are quite right, the sensible thing would be to remove both wings, whip out the engine and do the whole thing properly. My plan originally was to cut my teeth on the 450SL project....and then move on to the silver SL once I was a little more experienced with welding and fabrication. However as 2020 has taught us, plans change, so who knows where this current SL will lead me. Mike
Hello Kelly, are you referring to the D Jet ECU? If you have a 350 SL, you have one that controls the injectors and one that controls the ignition (actually, it is merely a "switch"). I have the same car and can gladly advise you on what to do.
@@Kellysg126 Hi - I don't have any particularly good source for ECU's. I know that the SL shop has a reconditioning service but it aint cheap! Meanwhile, you can have a read of this article - it might throw some light on your issue: jetronic.org/en/d-jetronic/53-ecu Mike
@@jonm1066 Hi - if you have a look at this video (ruclips.net/video/hQGic5k2vBw/видео.html) it shows how the bumpers are made up. There is no plastic and I suppose you could in theory remove the chrome - but the bumper would look pretty weird with it. Are you asking because you have an SL and want to mod it...or areyou asking just out of interest? Mike
@@MikesMercsandothercars thanks! I guess I was looking at the US or NA version of the bumper . I wanted to see if I can remove it because it’s a lot bulkier than your EU version
Fantastic job Mike!!! Thanks to your video I was able to change easily, the right side wing of my SL300 . Just a doubt. Originally, the space in this wing area over the wheel, In wich colour was painted? Chasis colour? Black? Best regards from Spain
Thanks for your comment - glad to hear you managed to change your wing! The wheel arches were generally painted black. On my red 280SL which was stolen, someone had painted them red (the chassis colour - it looked OK but was not correct) Mike
Mike. How did you manage to fit non original wings onto the car. I have some reproduction wings and they will not fit at all. The distances between the fixing holes near the door are not the same as the original. Any advice?
Sorry to hear you are having problems fitting repro wings. What is the make model and year of your car?....and where did you get the wings? The reason for asking is that the shape of the wing may have changed slightly...I found this when trying to fit the headlights to my now stolen 280SL. I must confess that the new wings I had fitted to that 280SL were fitted by a body shop and not by me...but they never said they had any problems. Mike
Hey Mike. I was thinking about removing my passenger side wing but I was looking around it and there is like three inches of weld at the front on top where the cross bar goes to the other fender wing. Do you know what I’m talking about? I wish I could show pictures of it now.
Hi - you can send a picture to m_scott65@hotmail.com and let me know via this channel when you have done it. I don;t look at that email unless I am expecting something. Mike
@@MikesMercsandothercarsI just sent you an email. Thank you.
Hi - cant see it . What address did you send it to? m_scott65@hotmail.com?@@joshuaculley9695
@@MikesMercsandothercarsI think it did gmail instead of hotmail
Hey Mike,
At 4:17 4:18. Where can I get those clips? I looked and looked online and what I found looked like what I needed and they look too wide. Let me scrub the video and see if you linked it at the end of the video.
Thanks
Hi - I believe they are part number A0009945645 as per the diagram shown at:
mb-teilekatalog.info/view_SubGroupAction.php?lang=E&mode=BM&class=1&aggtyp=FG&catalog=048&model=107042&group=88&subgrp=015
You can get them at the SL Shop if you are in the UK:
parts.theslshop.com/headlamp-fastener-blower-motor-cover-mounting-clip-0009945645/
Mike
Fantastic
You are a man of few words...but I appreciate your comments. Mike
Happy New Year Mike! Wish you and your family all the best. Looking forward to more of you great videos.
Will you remove both fenders?
You should probably remove the engine as well and do a complete "rust bath" restoration of the front section in classic Mike's Mercs fashion, making everything look like new or better than new.
Happy New Year to you! Once again, you are quite right, the sensible thing would be to remove both wings, whip out the engine and do the whole thing properly. My plan originally was to cut my teeth on the 450SL project....and then move on to the silver SL once I was a little more experienced with welding and fabrication. However as 2020 has taught us, plans change, so who knows where this current SL will lead me. Mike
Hi mike. Hope you had a good new year! Do you know of any aftermarket ecus for the 350sl?
Hello Kelly, are you referring to the D Jet ECU? If you have a 350 SL, you have one that controls the injectors and one that controls the ignition (actually, it is merely a "switch").
I have the same car and can gladly advise you on what to do.
@@cav4290 im referring to the d jet yes.
@@cav4290 mine is 1971
@@Kellysg126 Hi - I don't have any particularly good source for ECU's. I know that the SL shop has a reconditioning service but it aint cheap! Meanwhile, you can have a read of this article - it might throw some light on your issue:
jetronic.org/en/d-jetronic/53-ecu
Mike
Is it possible to do bumper delete
Thanks for your comment.... but I’m not sure understand your question. What do you mean by bumper delete? Mike
@@MikesMercsandothercars remove the plastic and chrome parts from the rear and front where technically it’s for protection
@@jonm1066 Hi - if you have a look at this video (ruclips.net/video/hQGic5k2vBw/видео.html) it shows how the bumpers are made up. There is no plastic and I suppose you could in theory remove the chrome - but the bumper would look pretty weird with it. Are you asking because you have an SL and want to mod it...or areyou asking just out of interest? Mike
@@MikesMercsandothercars thanks! I guess I was looking at the US or NA version of the bumper . I wanted to see if I can remove it because it’s a lot bulkier than your EU version
Yes - it is a very common (if not expensive) mod that many owners of US cars do.....then they switch the front headlights to euro spec. Mike