Ruroc could drop the price of their lids by a hundred bucks or more, by packaging it in a plain box. I don't know anyone who gets excited by, nor keeps, the shipping box (just ignore Chase's giggles).
If you're buying a track helmet just save and get a good one. An AGV, ALPINE, SHARK. I've never once heard a good thing about Ruroc, I've been subscribed to chase for years but never cared to own a Ruroc.
Crash over 100 mph with shark helmet and walk away with minimum damage only other helmet i use daily beside racer r pro is ls2 thunder. Enjoy some of the anesthetic that my ls2 thunder has over my racer r pro.
As an old school rider (been scootin' Harley's for 45 years now), who has worn no helmet long before state laws, to wearing a half helmet to satisfy the law, to wearing a Ruroc 3.0 Carbon, and a 4.0 Ghost. Both of which are rigged for cameras, mic's, and SENA's. I don't know the levels of wind noise, or where it gets "bad" or not. I can tell you, that going from a half helmet, to a full face while riding a short pipe Harley, is noise and wind free! Many of you do not realize, that head shape dominates the fit and feel of a helmet. If your head does not best fit the liner or shell shape, you will get wind noise, hot spots, and a loose fit no matter how cinched the chin strap is. Those of us who love our Ruroc's, have helmets that fit our beans. Those who hate it...don't. Before you start, this applies to ALL helmets, regardless who makes them. This is why you tried on different brands, before deciding on the "best helmet ever" for you. This is also why there are dozens of makers of helmets. Go to any helmet review...or any gear review for that matter... and you will find detractors hating it, or telling how shitty it was while it fell apart in their hands, along with the highest of praise. So, to each his own. Obviously, Ruroc helmets fit Chase's head just fine, as they do my big nut. YMMV!
@@MrDeepseadwellerwell I tried my homies on and just ordered the 4.0 track gold and carbon and it fits great even better cus his was a size too big and it’s way lighter than my plastic helmet
I have the Ruroc Atlas 4.0 Liquid Carbon. It’s not worth the price. I’d imagine the track version is just the same. Honest opinion, wait a few more iterations before you buy any Ruroc motorcycle helmet. Pros: • Looks cool 🤷🏻♂️ • Comfortable when the helmet is on Cons: • The wind noise is CRAZY loud even at low speeds (AND I WEAR EARPLUGS) • It has horrible aerodynamics, there’s way too much wind buffeting for a helmet at this price • Even with ALL the vents closed, the wind gets through and goes directly into your eyes • It’s an absolute bitch to take off, well after its break in period • By far the worst helmet for highway speeds If you have the money for an Atlas 4.0, save up an extra 100-200 bucks and get yourself a Shoei rf1400, HJC RPHA 11 Pro, or an AGV K6
Wholly agree. I have the blue one and even at the $300 I managed to snag it for, it was noticeably worse than my icon Airflite. No internal sun visor, fit is not very snug, bad wind noise, the visor is a HUGE pain in the ass to close all the way, and I cannot feel the difference between the vents open and the vents closed. Ill one up it as well and say that securing the visor to the helmet with twisty bits is a horrible design. DONT BUY THESE
Very true I have the same and yes it’s not worth the money at all don’t get me started on the Harmon/kardon comms unit it’s almost useless and you add the wind noise it’s basically a whisper in your ear
Arguably, on track you don't care that much about wind noise and so on. You would want as much airflow and adjustability as you can get. Because depending on changing conditions you'll likely sweat your ass out. And opening vents gets you more air, but also more noise.
Yes, it is against RUclips’s policies for creators to not disclose sponsored content properly. RUclips requires creators to clearly inform their audience when a video includes paid promotion, sponsorship, or endorsement. This is to ensure transparency and to maintain trust with the viewer. If a creator fails to adequately disclose such relationships, it can be considered a violation of RUclips’s terms of service, specifically their policies on transparency and honesty. This not only applies to RUclips’s rules but also often aligns with federal advertising regulations in many countries, such as the FTC guidelines in the United States, which mandate clear and conspicuous disclosure of sponsorships.
I’ve got a regular Ruroc 4.0 Batman edition. Not worth the money at all in my opinion. Yes it looks very cool, but the build quality is horrible. The inside liner of the helmet is already tearing apart after half a year of use. The shockwave? Decent quality.
I got the standard 4.0 and as nice as jt looks, i cant stand the fit. It went from tight to quite loose fitment inside in 2 rides, yet its still a bitch to take off. Bought the Shoei NXR2, which I should’ve in the first place
Only had a few dry rides with my track version before all the glue gave up including the rubber trim around the bottom, the padding, the spoiler plus the clip inserts for the chin curtain and cheek pads bent and wouldn't clip in. They refunded me for the helmet and I went with a different brand. The helmet performed very well but I've not come across such bad build quality ever! maybe mine was a one off and I was just unlucky (unlikely as I seen another with build issues on social media) but I couldn't take that chance.
It’s insane how many bad reviews I see on this helmet. The style alone is beautiful but if the quality is that bad I think I’m going to reconsider. I’m using a Bell Broozer right now and the price of those aren’t the best but I will say it’s a decent lid. I paid 279.00 for the Broozer but..there is some improvements that can be made
I was just setting up my camera and audio on a new helmet and thought I'd watch a quick refresher, so searched RUclips for one of your helmet setups... the first one listed was 11 years ago! I've been watching since Chasein3D and had no idea so much time had past! That's pretty crazy... and awesome. Congrats!
It would be amazeballs if they made the track spoiler & closed side vents standard on everything moving forward starting with the 5.0 that way for those of us never going to the track we can still get our fidlock.
The rubber strip is a sloppy lazy solution. Take your 700.00 dollars you would of wasted on this and try an Arai or Shoei or Schuberth. All seal excellent and are super light and offer a much better quality helmet for that price point.
Love the look of the helmet the only problem i have is the plastic insert in place of the shockwave keeping flying out at highspeed had to order 3 if them so far.😢seems like its held in magnetically
Even with race safety certification, the long term fit and finish of this helmet remains questionable. The facility to use Shockwave seems a bit strange but does leave the door open to future development. To test this helmet on a first ride with vents closed AND taped up only highlights the fact that this remains a noisy helmet. I do understand that commenting during the ride was necessary but y'all should have shown what its like with vents open first. I do agree with Chase that losing the USP Fidlock to double D rings is a shame but racing standards need to be met. I think I will stick with any other helmet that fits me better (both now and in the long run) and will not fall for the gimmicky designs that invariably will try to help sell this poor product.
If no respectable professional race organization/rider is using the helmet in their series, why trust it on your head for track use? Id choose a snell rated sedici strada over a ruroc for track use. That acu gold standard is ass. Companies can pay for that rating without actually being certified.
I have a blue one in the shop but haven't opened it yet. TBH I really love the subtle gloss black with the carbon but I'll hold my opinion for when I see some color.
Dudes will drop $15 to $20k on a bike yet absolutely lose their minds at the thought of an $800-$1000 lid from Arai , Shoei or AGV to protect their brains. Wild.
My problem with their helmets is the lack of shell sizes. Unless you're an XL or of the like, you're going to have a big helmet. I wear a Small Medium with my AGV Corsa. AGV has two Mediums; a small and a large medium. They also come in multiple shell sizes so I'm not rocking the same size helmet an XXL is. 5'9 and 180lbs with an XXL shell size makes me look like an awkward alien. But then again, I also have a hard time believing you are serious with you input on this helmet when you tried to sell us on that Chinese Predator helmet that was about as a helmet as I am a porn star
How many revisions are they going to make their customers pay for beta=testing before they get it right? Or... will they never get it right? Buy a Voss if you want quality for a low price or buy an Arai if you want to spend the money for a high-end helmet. Ruroc is way over priced for a cheap helmet.
Ruroc propose vraiment de bonnes options en ce qui concerne les couleurs de visière. Je dois dire que bien que ces casques soient très légers, je ne suis pas sûr qu'ils permettent une circulation d'air suffisante pour le trail. Cependant, ils seraient parfaits pour le supermoto!
@@chaseontwowheels oui j’en ai un, mais il manque vraiment les options énumérées plus haut. Surtout qu’ils avaient sorti à l’époque le berzerker. Quand je parlais des visières c’était surtout des casquettes de casques
@@chaseontwowheels n’hésitez pas à faire remonter l’info des consommateurs à ce sujet, on est beaucoup à vouloir ses accessoires. Il ne manque pas grand chose pour que les amoureux du supermot achètent leurs casques
I'll wait for the AStars R-10 personally....at least they actually take 5 years to develop a helmet...Ruroc is like the iphone of MC lids (buy the 4.0 now, the 5.0 will be shipping out next month! lol)
Hey guys. I loved your video. I have a question about your vlog setup. Seems that you are using a 360 cam on the handlebars but we can still hear you. Normally guys have a GoPro on the helmet with a mic inside. How did you manage to make this possible ? What mic are you using ? I’m about to start my channel and I wanted to know. Not able to buy too many tools at first I need to be clever ;)
I honestly think this channel should stick to first ride i pressions. Not o ly this is so clearly a sponsored fanboy video, but sometimes feels like he saw a helmet for the first time ever. Everyone knows dlock is the safest standard there is, hence here in eu it is mandatory for track. Plus, cmon, if you call yourself a reviewer, then at least get your knowledge on certs a polish. I used to love this channel.
Oh shut up have you got one ? Have you experienced wearing one ? No you clearly haven't. I tell you what though. All these negative comments made me think you're in the pay role from shuie . I got mine today and hands down it's the best helmet Ive used period. Not getting paid to say it I'm just me and I'm going off experience. Too many people waffling on now a out being paid when they haven't put their hand in their pockets and tried it them selves . Stop being sheep sad little Muppets
I like your channel but I see these helmets shell rip apart. I know they are a sponsor but at some point you gotta draw the line. I’m sure the helmets tested for ratings was QA checked but doesn’t mean the rest are.
I just don't understand why people are seemingly going on about Ruroc. This is only the 4th helmet design and I would like to know how the hell they passed ECE testing on that 3.0 helmet. Definitely not with the pads they used on the retail side. So, 4 helmets and 1 decent and more than one not decent, and they are throwing their product in with manufacturers like Arai and Shoei . Arai has been making helmets for nearly 100 years. All of that history and building on the technology for years to get where they are. Shoei has been making helmets for over 60 years and have done what Arai has done. Innovations that were developed by these companies that we take for granted today. So not just no, but HELL NO! Give Ruroc a decade or two and we'll see how they are then.
i use to own atlas 3.0 joker edition. from my opinion, its not worth at all. before that, i wear shark R race pro GP. so huge difference between those two. for track usage, i would recommend shark or scorpion. works way much better
its funny how you see rurocs reputition go down slowly and only influencers and youtubers praising them most of the time .. i bought one back in the day .. i guess it was the 3.0. Everyone loved them everywhere you looked. As i received mine, first i was so happy but after actually riding with it after like a week, it was just worse than my 100€ noname helmet in most aspects. After the Ruroc i got the rpha 11.. and let me tell you .. this helmet is SICK.. its pretty quiet and compared to ruroc its VERY VERY QUIET. It fits better, airflow is less but more focused as i can say so. In the Ruroc theres no airflow if you have the visor down its just like if its up. and its like only 100grams or so lighter than my non carbon rpha11 .. tldr : ruroc look different, i would say cool but thats it. If you want actual performance and good quality build helmet .. go for hjc/shoei even scorpion and agv
Ls2 track helmet is a better purchase. It cost half the price of a pista and has lot of track items you see in the pista package. Only retails around $700. It extremely loud.
Could you compare this to something similarly classed? Like the HJC Rpha 11 (or Rpha 1) Carbon, Caberg Drift EVO carbon, Bell Race Star DLX Flex, Xlite x803 rs carbon or Shoei x-spirit 3 or something like that
I sent mine back because of poor build quality and went with the Shoei x-spirit 3, no comparison plus I got the Shoei for £360 with the newer lids coming out
@@jdhxbdu they are widely known to be unsafe and crap quality. Their ceo was on record saying they didnt believe in paying to test their helmets safety because their buyers could simply do that for them.
"This thing feels incredibly light, I have never seen anybody turning in so slow. Oh my. goodness." 🤣 Probably u got the clear visor so he/she wanna see your face. Lol
It's not regardless "if" the D ring is safer, it definetely is and has been for what 50yrs+... How many Moto GP, WSBK or Isle of Man TT riders are in a Ruroc?? I'll possibly take a second look when and if that is the case!!!
problem is sponsored Ruroc content creator rave about it...while non sponsored by Ruroc those creator say it's crap (for the price) there's even shops won't recommend them perhaps that's why Ruroc distribute them exclusively themselves the only one good thing about Ruroc people say it that they have the greatest media campaign team
You’re better off putting the box on your head. Ruroc helmets loosely termed “quality” is dangerous and will over instill confidence in a generic product. I enjoy your videos but I straight up tune you out when you shill Ruroc.
I am not sponsored by anything. I have been blessed to have owned a ton of helmets, going all the way back to the Shoei RF 200 and 700. More recently, you name it... Arai 7xRv, Bilt Raptor Shadow, Shoei GT AIR II, Ruroc 2.0, 4.0 Invictus, and 4.0 Track. The 4.0 Track is far and away the best helmet I own specifically for the track. Fit, comfort, air flow, and what I hope is safety. ALL of us are hoping we never have to see how ANY helmet stands up in a wreck. It's trust. If Ruroc had waited to make the 4.0s as their original release, no one would have anything to say.
I will stick to Shoei's i have been using them for a couple of decades, they just fit my head correctly and have saved me more than once from idiot car drivers.
Can anybody speak on ventalation for this helmet?? I want to buy but i wont be doing more than 60mph or so, not sure if at lower speeds it will get super hot.... also will this helmet fog up?
Friends don't let Friends wear Ruroc. Worst helmets I ever bought in over 40 years of riding both dirt and street. Nothing like having the padding fall out, while you ride around looking like a caricature with a head 3 times the size it should be. Have you ever gone over 150mph with a helmet 3 times the size it should be? and I'm not talking about getting the wrong size, I'm talking about the fact that they have one shell size for all people. So if you're a small or medium helmet size, its ridiculous. I honestly don't know how these guys got internet popular, I guess if you give away more helmets than you can sell, it probably helps.
Chase is like the Vloggers we have here in the Philippines who reviews this brand called "EVO", which is an overhyped piece of plastic they call a helmet 😂
This is obviously a paid advertisement video. I only wear helmets from companies that are used in Motogp. It means they employ technology good enough for the one of toughest and most demanding motorsport. They have enough funding to funnel research and development to keep improving the technology. That technology is funnel down their production line. They have enough data retention to keep improving. They have some standard to be part of the elite helmet brands, without that standard in production and safety, Motogp would stop using them - "proof of concept".
Carbon fiber isn't the end all, be all material so that's kind of an ignorant statement. So shoei and arai can make a none carbon fiber helmet and still be worth more than this ruroc based on the safety technology and development.
@@gabrielkopp2036Then what is the point of you mentioning it? Scorpion, HJC, Sedici just to name a few have carbon helmets that cost less than these pieces of shit and they're better.
You can’t compare this trash with anything SHOEI ESPECIALLY THE HELMETS, Ruroc is not even decent enough when you buy a new Chinese scooter or motorcycle and they gift you a new helmet for free , it ain’t even worth that, straight up!!✌🏼👨🏼🦲🛵🏍🎱💣💯💯💩💩💩🤣🤣🤣
Unboxing and first impressions from a sponsor….
Done labeling it on sponsorblock :)
Totally not a biased review.....
Was so bout to say the same shit …. Their helmets are junk
Y’all crying about a 13 min video of a helmet you might want to look at? Jelly very jelly
@@corymoncus749 lol their helmets are trash …. Why u think no stores carry them
Ruroc could drop the price of their lids by a hundred bucks or more, by packaging it in a plain box. I don't know anyone who gets excited by, nor keeps, the shipping box (just ignore Chase's giggles).
True there’s more quality in the box design than the helmet itself
They could drop it by 200 and the helmet still wouldn't be worth it.
If you're buying a track helmet just save and get a good one. An AGV, ALPINE, SHARK. I've never once heard a good thing about Ruroc, I've been subscribed to chase for years but never cared to own a Ruroc.
Your won’t even be saving at that price. Tons of gotear track helmets for 600$
Crash over 100 mph with shark helmet and walk away with minimum damage only other helmet i use daily beside racer r pro is ls2 thunder. Enjoy some of the anesthetic that my ls2 thunder has over my racer r pro.
Lmao what about one of the best shoei?
Lmao u don't really ride than. Best track helmet by far
@@moengalol man went away to do some research and came back with a conclusion
As an old school rider (been scootin' Harley's for 45 years now), who has worn no helmet long before state laws, to wearing a half helmet to satisfy the law, to wearing a Ruroc 3.0 Carbon, and a 4.0 Ghost. Both of which are rigged for cameras, mic's, and SENA's. I don't know the levels of wind noise, or where it gets "bad" or not. I can tell you, that going from a half helmet, to a full face while riding a short pipe Harley, is noise and wind free!
Many of you do not realize, that head shape dominates the fit and feel of a helmet. If your head does not best fit the liner or shell shape, you will get wind noise, hot spots, and a loose fit no matter how cinched the chin strap is. Those of us who love our Ruroc's, have helmets that fit our beans. Those who hate it...don't. Before you start, this applies to ALL helmets, regardless who makes them. This is why you tried on different brands, before deciding on the "best helmet ever" for you. This is also why there are dozens of makers of helmets.
Go to any helmet review...or any gear review for that matter... and you will find detractors hating it, or telling how shitty it was while it fell apart in their hands, along with the highest of praise. So, to each his own. Obviously, Ruroc helmets fit Chase's head just fine, as they do my big nut. YMMV!
And that is why buying a helmet through the mail, without being able to try it on, is a ridiculous business model.
@@MrDeepseadwellerwell I tried my homies on and just ordered the 4.0 track gold and carbon and it fits great even better cus his was a size too big and it’s way lighter than my plastic helmet
I have the Ruroc Atlas 4.0 Liquid Carbon. It’s not worth the price. I’d imagine the track version is just the same. Honest opinion, wait a few more iterations before you buy any Ruroc motorcycle helmet.
Pros:
• Looks cool 🤷🏻♂️
• Comfortable when the helmet is on
Cons:
• The wind noise is CRAZY loud even at low speeds (AND I WEAR EARPLUGS)
• It has horrible aerodynamics, there’s way too much wind buffeting for a helmet at this price
• Even with ALL the vents closed, the wind gets through and goes directly into your eyes
• It’s an absolute bitch to take off, well after its break in period
• By far the worst helmet for highway speeds
If you have the money for an Atlas 4.0, save up an extra 100-200 bucks and get yourself a Shoei rf1400, HJC RPHA 11 Pro, or an AGV K6
"wait a few more iterations before you buy" - have been hearing this advice since this helmet manufacturer came to youtubers.
Or the Shark Race-R GP Pro.
Wholly agree. I have the blue one and even at the $300 I managed to snag it for, it was noticeably worse than my icon Airflite. No internal sun visor, fit is not very snug, bad wind noise, the visor is a HUGE pain in the ass to close all the way, and I cannot feel the difference between the vents open and the vents closed. Ill one up it as well and say that securing the visor to the helmet with twisty bits is a horrible design. DONT BUY THESE
Agreed. The helmet is way too loud, and I’ve had issues with wind going under the cheek pads and blowing straight into my ears
Very true I have the same and yes it’s not worth the money at all don’t get me started on the Harmon/kardon comms unit it’s almost useless and you add the wind noise it’s basically a whisper in your ear
Arguably, on track you don't care that much about wind noise and so on. You would want as much airflow and adjustability as you can get. Because depending on changing conditions you'll likely sweat your ass out. And opening vents gets you more air, but also more noise.
O.C- looking forward to trying it out and comparing it to my other helmets that are track focused.
Imagine when they made a helmet caring more about being safe than the look🤯... And without being a sponsored video 🤯
Yes, it is against RUclips’s policies for creators to not disclose sponsored content properly.
RUclips requires creators to clearly inform their audience when a video includes paid promotion, sponsorship, or endorsement. This is to ensure transparency and to maintain trust with the viewer.
If a creator fails to adequately disclose such relationships, it can be considered a violation of RUclips’s terms of service, specifically their policies on transparency and honesty.
This not only applies to RUclips’s rules but also often aligns with federal advertising regulations in many countries, such as the FTC guidelines in the United States, which mandate clear and conspicuous disclosure of sponsorships.
If it’s garbage everyone should know it’s garbage or compromise their safety
That rubber on top will help rain water not getting in.. thank god ruroc heard it
I’ve got a regular Ruroc 4.0 Batman edition. Not worth the money at all in my opinion. Yes it looks very cool, but the build quality is horrible. The inside liner of the helmet is already tearing apart after half a year of use. The shockwave? Decent quality.
I've got a Caberg Stunt which cost me 150 bucks and it's really solid. just abit loud
I got the standard 4.0 and as nice as jt looks, i cant stand the fit. It went from tight to quite loose fitment inside in 2 rides, yet its still a bitch to take off. Bought the Shoei NXR2, which I should’ve in the first place
@@QuizInMyEyeme dá por favor o RUROC.
Sou do Brasil e sonho diariamente com um RUROC
Only had a few dry rides with my track version before all the glue gave up including the rubber trim around the bottom, the padding, the spoiler plus the clip inserts for the chin curtain and cheek pads bent and wouldn't clip in. They refunded me for the helmet and I went with a different brand. The helmet performed very well but I've not come across such bad build quality ever! maybe mine was a one off and I was just unlucky (unlikely as I seen another with build issues on social media) but I couldn't take that chance.
They’re junk. Look at the rest of the comments and real world reviews.
It’s insane how many bad reviews I see on this helmet. The style alone is beautiful but if the quality is that bad I think I’m going to reconsider. I’m using a Bell Broozer right now and the price of those aren’t the best but I will say it’s a decent lid. I paid 279.00 for the Broozer but..there is some improvements that can be made
If it’s not on the shelf at a cycle shop, I’m weary about buying it
I was just setting up my camera and audio on a new helmet and thought I'd watch a quick refresher, so searched RUclips for one of your helmet setups... the first one listed was 11 years ago! I've been watching since Chasein3D and had no idea so much time had past! That's pretty crazy... and awesome. Congrats!
It would be amazeballs if they made the track spoiler & closed side vents standard on everything moving forward starting with the 5.0 that way for those of us never going to the track we can still get our fidlock.
My ultimate helmet would have front/rear camera, speakers, mic, and transitions lens all built into the helmet
The rubber strip is a sloppy lazy solution. Take your 700.00 dollars you would of wasted on this and try an Arai or Shoei or Schuberth. All seal excellent and are super light and offer a much better quality helmet for that price point.
100%. Shoei are still hand made in Japan and this crap falls off a conveyor belt in China.
No, the answer is still no
I can imagine track helmets have coms, so the fact that the mount for the shockwave is still there, makes sense.
Great video!!! Good iob on getting a ELI5 voice actor (or a just a smart ass kid!) for the Rheon explanation 10/10.
Love the look of the helmet the only problem i have is the plastic insert in place of the shockwave keeping flying out at highspeed had to order 3 if them so far.😢seems like its held in magnetically
The Shockwave doesn’t come with the Track?
@@kendtchileninjah5905 not with the track unfortunately but sometimes they run promotions but most of the time it's for normal 4.0 purchases
Even with race safety certification, the long term fit and finish of this helmet remains questionable. The facility to use Shockwave seems a bit strange but does leave the door open to future development. To test this helmet on a first ride with vents closed AND taped up only highlights the fact that this remains a noisy helmet. I do understand that commenting during the ride was necessary but y'all should have shown what its like with vents open first. I do agree with Chase that losing the USP Fidlock to double D rings is a shame but racing standards need to be met. I think I will stick with any other helmet that fits me better (both now and in the long run) and will not fall for the gimmicky designs that invariably will try to help sell this poor product.
If no respectable professional race organization/rider is using the helmet in their series, why trust it on your head for track use? Id choose a snell rated sedici strada over a ruroc for track use. That acu gold standard is ass. Companies can pay for that rating without actually being certified.
I still have the 2.0 it’s comfortable. Sad that they don’t make stuff for it anymore 😢
RPHA 11 Pro, RF1400, Scorpion R1, and AGV K6 are ALL better AND cheaper.
Love the looks of this helmet especially the red. I believe this is the first review of it I've come across. Good job
I have a blue one in the shop but haven't opened it yet. TBH I really love the subtle gloss black with the carbon but I'll hold my opinion for when I see some color.
@@chaseontwowheels Awesome! Can't wait to see it in video
Dudes will drop $15 to $20k on a bike yet absolutely lose their minds at the thought of an $800-$1000 lid from Arai , Shoei or AGV to protect their brains. Wild.
My problem with their helmets is the lack of shell sizes. Unless you're an XL or of the like, you're going to have a big helmet. I wear a Small Medium with my AGV Corsa. AGV has two Mediums; a small and a large medium. They also come in multiple shell sizes so I'm not rocking the same size helmet an XXL is. 5'9 and 180lbs with an XXL shell size makes me look like an awkward alien.
But then again, I also have a hard time believing you are serious with you input on this helmet when you tried to sell us on that Chinese Predator helmet that was about as a helmet as I am a porn star
How long does the shipping take?? I’m buying that same one tomorrow😁 I’m in texas and I think those are from the uk.
How many revisions are they going to make their customers pay for beta=testing before they get it right? Or... will they never get it right? Buy a Voss if you want quality for a low price or buy an Arai if you want to spend the money for a high-end helmet. Ruroc is way over priced for a cheap helmet.
If I buying this I can somehow open the wents? Or the track variation is always locked?
Une visière et des masques dispo avec le 4.0. Ça serait le feu !
Pour un usage cross/ trail/ supermoto
Ruroc propose vraiment de bonnes options en ce qui concerne les couleurs de visière. Je dois dire que bien que ces casques soient très légers, je ne suis pas sûr qu'ils permettent une circulation d'air suffisante pour le trail. Cependant, ils seraient parfaits pour le supermoto!
@@chaseontwowheels oui j’en ai un, mais il manque vraiment les options énumérées plus haut. Surtout qu’ils avaient sorti à l’époque le berzerker.
Quand je parlais des visières c’était surtout des casquettes de casques
@@chaseontwowheels n’hésitez pas à faire remonter l’info des consommateurs à ce sujet, on est beaucoup à vouloir ses accessoires. Il ne manque pas grand chose pour que les amoureux du supermot achètent leurs casques
I’m a newbie.. but even I know by now that friends dont let friends rock Ruroc lids.
Facts yk what’s up
They still can't figure out how to make a visor seal properly so they threw a big ugly rubber seal around the visor, yuck
I'll wait for the AStars R-10 personally....at least they actually take 5 years to develop a helmet...Ruroc is like the iphone of MC lids (buy the 4.0 now, the 5.0 will be shipping out next month! lol)
Yea it seems they go for style over safety
Yea it seems they go for style over safety
What’s the best carbon fiber high end helmet that looks dope like this?
With a title like that combined with their history I'd NEVER even consider it.
No thanks. I’ll keep my Arai.
Most people who buy this will be for its looks and on road. Track secondary if at all
Its a shame these are rated so horribly by the bike community. They look so good
I can make a composite spoiler and add it to the 4.0 and voila! Track Helmet. I'll stick to my KYT NZ-Race for the track
Hey guys. I loved your video.
I have a question about your vlog setup. Seems that you are using a 360 cam on the handlebars but we can still hear you. Normally guys have a GoPro on the helmet with a mic inside. How did you manage to make this possible ? What mic are you using ?
I’m about to start my channel and I wanted to know. Not able to buy too many tools at first I need to be clever ;)
I honestly think this channel should stick to first ride i pressions. Not o ly this is so clearly a sponsored fanboy video, but sometimes feels like he saw a helmet for the first time ever. Everyone knows dlock is the safest standard there is, hence here in eu it is mandatory for track. Plus, cmon, if you call yourself a reviewer, then at least get your knowledge on certs a polish. I used to love this channel.
@chaseontwowheels. Still waiting on the Smort Helmet review. The people have spoken
I wouldn’t trust Ruroc to make a pair of socks let alone a helmet.
How much did they pay you to make this video?? 😂😂
More than we made watching it lol
Oh shut up have you got one ? Have you experienced wearing one ? No you clearly haven't. I tell you what though. All these negative comments made me think you're in the pay role from shuie . I got mine today and hands down it's the best helmet Ive used period. Not getting paid to say it I'm just me and I'm going off experience. Too many people waffling on now a out being paid when they haven't put their hand in their pockets and tried it them selves . Stop being sheep sad little Muppets
Just cuz u cant afford one u troll
@@Fish-bj1sj 😂😂😂😂my helmet is more expensive than that Chinese junk 😂😂😂 nice try bud
@@MrWolf2212 sure your mountain bike helmet
I like your channel but I see these helmets shell rip apart. I know they are a sponsor but at some point you gotta draw the line. I’m sure the helmets tested for ratings was QA checked but doesn’t mean the rest are.
Miata in the background 😍😍😍
The RHEON segment was definitely my favorite😂
Same. I can't confirm if I may be putting something like that in videos in the future. I laughed way too hard putting it in.
@@chaseontwowheels caught me off guard. Legitimately laughed out loud
would you recommend this for street use?
I just don't understand why people are seemingly going on about Ruroc. This is only the 4th helmet design and I would like to know how the hell they passed ECE testing on that 3.0 helmet. Definitely not with the pads they used on the retail side. So, 4 helmets and 1 decent and more than one not decent, and they are throwing their product in with manufacturers like Arai and Shoei . Arai has been making helmets for nearly 100 years. All of that history and building on the technology for years to get where they are. Shoei has been making helmets for over 60 years and have done what Arai has done. Innovations that were developed by these companies that we take for granted today. So not just no, but HELL NO! Give Ruroc a decade or two and we'll see how they are then.
How is the sizing I followed their guide on a 2.0 and it was just ever so slightly too big. How does the 4.0 track compare??
i use to own atlas 3.0 joker edition. from my opinion, its not worth at all. before that, i wear shark R race pro GP. so huge difference between those two. for track usage, i would recommend shark or scorpion. works way much better
Motorcycle shops will steer you far from these death traps
Hello, cool video. I have a question for you. How much does this helmet really weigh in kilograms?❤
Only Jerrys wear Ruroc on the mountains... Idk what the equivalent term is for riding 😅
LOL that helmet is not for Track....
Being a track helmet can you still use it on the street legally?
its funny how you see rurocs reputition go down slowly and only influencers and youtubers praising them most of the time .. i bought one back in the day .. i guess it was the 3.0. Everyone loved them everywhere you looked. As i received mine, first i was so happy but after actually riding with it after like a week, it was just worse than my 100€ noname helmet in most aspects. After the Ruroc i got the rpha 11.. and let me tell you .. this helmet is SICK.. its pretty quiet and compared to ruroc its VERY VERY QUIET. It fits better, airflow is less but more focused as i can say so. In the Ruroc theres no airflow if you have the visor down its just like if its up. and its like only 100grams or so lighter than my non carbon rpha11 ..
tldr : ruroc look different, i would say cool but thats it. If you want actual performance and good quality build helmet .. go for hjc/shoei even scorpion and agv
Ls2 track helmet is a better purchase. It cost half the price of a pista and has lot of track items you see in the pista package. Only retails around $700. It extremely loud.
is it loud when riding on the street?
Just tryna figure out what size I would be, I had a shoei x14 and I was a medium, I wonder if I’d fit into a small to have it nice and tight
U didn't think that some track teams use blu tooth to give the rider feed back , lap time and ect.
Could you compare this to something similarly classed?
Like the HJC Rpha 11 (or Rpha 1) Carbon, Caberg Drift EVO carbon, Bell Race Star DLX Flex, Xlite x803 rs carbon or Shoei x-spirit 3 or something like that
I sent mine back because of poor build quality and went with the Shoei x-spirit 3, no comparison plus I got the Shoei for £360 with the newer lids coming out
Sadly probably not because they sponsor him
Ruroc rolling updates faster than Android.
No thank you. Im good with my Shark, HJC and Shoei.
You could not pay me to buy a ruroc.
Why?
@@jdhxbdu they are widely known to be unsafe and crap quality. Their ceo was on record saying they didnt believe in paying to test their helmets safety because their buyers could simply do that for them.
Here we go. CHASE AND HIS BS.
I will stick to my SHOEI
"This thing feels incredibly light, I have never seen anybody turning in so slow. Oh my. goodness." 🤣 Probably u got the clear visor so he/she wanna see your face. Lol
Ruroc is not it bro. Sometimes money isn't everything. 550 for a helmet that after u wear it 3 times the rubber starts coming off
It's not regardless "if" the D ring is safer, it definetely is and has been for what 50yrs+... How many Moto GP, WSBK or Isle of Man TT riders are in a Ruroc?? I'll possibly take a second look when and if that is the case!!!
Oh boy..
problem is sponsored Ruroc content creator rave about it...while non sponsored by Ruroc those creator say it's crap (for the price) there's even shops won't recommend them perhaps that's why Ruroc distribute them exclusively themselves the only one good thing about Ruroc people say it that they have the greatest media campaign team
tested on paying clients, chase don't do track days with this helmets and that's a fact
Chase is the most biased Ruroc reviewer ever😂😂😂
It seems so fake it is funny
You’re better off putting the box on your head. Ruroc helmets loosely termed “quality” is dangerous and will over instill confidence in a generic product. I enjoy your videos but I straight up tune you out when you shill Ruroc.
Why does it have 2 Eu safety ratings when most places in America require Snell?
Probably because it is a Euro brand helmet and their market is way bigger than North America's. Also, The ECE safety ratings are better than Snell.
Why does ruroc have Bluetooth setup in the back? Never understood that
Shoei does also to be fair (see GT AIR 2 and similar helmets).
I am not sponsored by anything. I have been blessed to have owned a ton of helmets, going all the way back to the Shoei RF 200 and 700. More recently, you name it... Arai 7xRv, Bilt Raptor Shadow, Shoei GT AIR II, Ruroc 2.0, 4.0 Invictus, and 4.0 Track.
The 4.0 Track is far and away the best helmet I own specifically for the track. Fit, comfort, air flow, and what I hope is safety. ALL of us are hoping we never have to see how ANY helmet stands up in a wreck. It's trust.
If Ruroc had waited to make the 4.0s as their original release, no one would have anything to say.
Yea I agree man. I really appreciate your input in this!
@chaseontwowheels my pleasure. Keep up the great vids.
I will stick to Shoei's i have been using them for a couple of decades, they just fit my head correctly and have saved me more than once from idiot car drivers.
How much Price in italy?
Can anybody speak on ventalation for this helmet?? I want to buy but i wont be doing more than 60mph or so, not sure if at lower speeds it will get super hot.... also will this helmet fog up?
It comes with a pin lock so fogging isn’t an issue.
Friends don't let Friends wear Ruroc. Worst helmets I ever bought in over 40 years of riding both dirt and street. Nothing like having the padding fall out, while you ride around looking like a caricature with a head 3 times the size it should be. Have you ever gone over 150mph with a helmet 3 times the size it should be? and I'm not talking about getting the wrong size, I'm talking about the fact that they have one shell size for all people. So if you're a small or medium helmet size, its ridiculous. I honestly don't know how these guys got internet popular, I guess if you give away more helmets than you can sell, it probably helps.
Nice lid!!!!
No FIM cert makes it a pass for me, will stick with the Pista GP RR
The “nose bump” on these has put me off for years. Cool innovative company though
Make sure to let us know what track and when.
I try the code it’s not working man
Chase is like the Vloggers we have here in the Philippines who reviews this brand called "EVO", which is an overhyped piece of plastic they call a helmet 😂
This is obviously a paid advertisement video.
I only wear helmets from companies that are used in Motogp. It means they employ technology good enough for the one of toughest and most demanding motorsport. They have enough funding to funnel research and development to keep improving the technology. That technology is funnel down their production line. They have enough data retention to keep improving. They have some standard to be part of the elite helmet brands, without that standard in production and safety, Motogp would stop using them - "proof of concept".
where the cf moto 450ss at man?
Recording a video on it today!
@@chaseontwowheels ayyy nice, can't wait to watch it
@7:18 This is the second time I've noticed it sitting there... Does that Answer belong to one of y'all?
The miata?
@@ridesmort Yeah, yeah, the answer :)
Soon as you hang all the motovlogging gear on there, the aerodynamics are out the window again. No gain.
Ruroc came a long way but the helmets still look big and bulky
Hows the size fitting for you? Is it any different than the regular Atlas 4.0?
So far the M/L is fitting exactly the same!
Love ruroc designs but the price and wind noise is horrible
That's price is not too bad for what you get..I've see helmets the are north of 1000 buck and not even carbon fiber
Carbon fiber isn't the end all, be all material so that's kind of an ignorant statement. So shoei and arai can make a none carbon fiber helmet and still be worth more than this ruroc based on the safety technology and development.
@@SupaDadMoto never said it was...
@@gabrielkopp2036Then what is the point of you mentioning it? Scorpion, HJC, Sedici just to name a few have carbon helmets that cost less than these pieces of shit and they're better.
I'll stick to Arai.
i have a ruroc track and i have no issue with wind noise
Coupon code dont work
What about compare to Shoei X15？
GET THE SHOEI
You can’t compare this trash with anything SHOEI ESPECIALLY THE HELMETS, Ruroc is not even decent enough when you buy a new Chinese scooter or motorcycle and they gift you a new helmet for free , it ain’t even worth that, straight up!!✌🏼👨🏼🦲🛵🏍🎱💣💯💯💩💩💩🤣🤣🤣