hey man, thanks for the explanation, great build. Do you still have the 3D files for the servo horn and gear pinions still laying around ? No 3d printing or upgrade parts needed for the monoshock ?
Good Job! I am new and i want to build my Own K989 like this. DO i really need a Radio for slowing it down because mine is too fast? or is it enough to Print a Gear und Put a Resistor in?
Yes you can slow down speed by change gear and put a resistor. But I still highly recommend to change a radio that can set EPA. Not only for slow down speed but also for set up steering angles. Because for RWD, you might have to set left and right turn EPA independently in order to have equal steering angles. 🙂
Hi the wheels come with Mini z body, I’m not sure if the wheels sold alone. Tires with round surface provide minimum friction you can find them on online RC shop :)
Nice video, super helpful and clean :) Great job! I set up my K989 just the way you did it. Since my front upper arms are shorter now the wheels barely touch the ground... Did you cur the chassis underneath the lower front arms so the suspension got room to travel?
Hi did you have gyro installed? Is the gyro set reversed? Have you tried to increase gyro gain? Also check 4 wheels are all contact ground without lifting.
Finally... love this kit..😍😍 Thanks brother... 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
very detailed and helpful, thanks and great video!
So clean 😮👍
Awesome, the video I was waiting for 👍
Ayy thanks for the help finally getting my car to slide how it should
hi i'm glad it helps, enjoy the slide :)
Tidy chassis 👍
Thanks bro 🙂
The advice for finding scale model wheel base is genius!
Thank you for information!
Great 👍👍👍
hey man, thanks for the explanation, great build. Do you still have the 3D files for the servo horn and gear pinions still laying around ? No 3d printing or upgrade parts needed for the monoshock ?
what pressicion and what material do ineed for the printed t shape
Good Job! I am new and i want to build my Own K989 like this. DO i really need a Radio for slowing it down because mine is too fast? or is it enough to Print a Gear und Put a Resistor in?
Yes you can slow down speed by change gear and put a resistor. But I still highly recommend to change a radio that can set EPA. Not only for slow down speed but also for set up steering angles. Because for RWD, you might have to set left and right turn EPA independently in order to have equal steering angles. 🙂
@@Eason_RC Thank you!
Thanks! This is super helpful! Where do you buy your wheels and tires?
Hi the wheels come with Mini z body, I’m not sure if the wheels sold alone. Tires with round surface provide minimum friction you can find them on online RC shop :)
Nice setup
Nice video, super helpful and clean :) Great job!
I set up my K989 just the way you did it. Since my front upper arms are shorter now the wheels barely touch the ground... Did you cur the chassis underneath the lower front arms so the suspension got room to travel?
Hi no I didn’t cut the chassis underneath the front arm. Have you check upper/lower swing arms all move freely without any interference?
@@Eason_RC yeah the swing arms have been the problem. Thanks a lot for replying! :)
Do I need both front and rear diff locked?
问个有点没有礼貌的问题噢 博主花这么多的精力在969上面真的值得嘛？有没有玩其他款式的车子
沒事，其實我也想嘗試其他後驅車架如Drift art, mk3, 井之類的，精度跟可調性都比土炮改k969來的好多了。最終沒買還是考量花費，因我是同時好幾台車架配不同車殼，不是一個車架換不同車殼玩，要是買好幾個後驅車架花費就太大了，再者台灣用淘寶買後驅車架的零件也沒這麼方便，就繼續用K969湊合著玩啦😅。
Buen video, el soporte de cuerpo magnético de donde lo has comprado?
Try here m.aliexpress.com/item/1005003822065008.html
Where did you get the mini-q adjustable rods and ballheads?
Hi its from taobao China. Or you can find it on Aliexpress :)
Are u use lock differential?
Yes rear is stock lock diff. 🙂
bro can you help me please i converted my wltoys k989 to rwd but the only thing it does is keep spinning i dont know what else to do
Hi did you have gyro installed? Is the gyro set reversed? Have you tried to increase gyro gain? Also check 4 wheels are all contact ground without lifting.
hello bro, you send me the link for buy this bodies for the k969?? Please
Hi you can search online for Tamiya 1/24 Mx5 model kit:)
Could you send me the 3d angle of the T ?
Sure please leave your email address and remember original designer is Zeus Garage