So glad kyle is one of the rare one on youtube that gives us some sbf content .....a little bit of it all type of content but has a lot of love for the ford engines ..thank u very much appreciated 💪
Just watched the Old Mans Video. You are learning our old ways and getting better. Still laughing at your Dad laughing in the background. One day you will be able to set timing by ear. I bet your Dad can also. NOTE.... Only fine wet sand it to get rid of orange peal then compound and wax
Great job Kyle. I like the use of basic lower dollar parts in your Windsor build. I have had great success with the 351W platform. Keep up the Ford content.
Fuel tech video, maybe mention to your dad? 5362.6HP fuel tech twin turbos, Turbosmart Boostgate 50 no waste gates on the exhaust side might want to check it out, what is interesting the two intakes has a cross over and the one gate controlling both sides. You look really comfortable looking forward to you content like SRC you guys will hit different audiences should be fun.
Use dish soap in your wet sanding water. And sand by hand until you have it mastered. If you insist in the da, skip the 600. It will be less chance burning through. Good luck...
Avoid the green interior at all costs. But the car itself looks sweet good work young man. You got good Family and again Love them SBF's so glad you have a channel now Kyle thank you for this content. God bless stay safe young man
Sorry, for that exterior, I see a mid brown tan leather on the seats and matching door cards. For the carpet, a darker brown.than the seats. Maybe four or five shades? And I use that brand car polish, it works pretty well for me if you keep your pads clean.
Hi Kyle I used to use Maguires products until I came across cartec products After using cartec cutters and polish products I’ll never go back to using Maguires night and day difference in the bringing out the colour yes more expensive but 200 percent better finish
Don't be too hard on yourself Kyle it's your first time painting buddy you're doing pretty good in my opinion. Too bad you couldn't get your Wheels re-chromed.
PLEASE do not put a money green inteior in your cruiser,my pick would be saddle tan\brown with yellow stitching. The paint job is looking grezt,I love the wagons,I had one like yours,wish I had it back. My real wagon was my 70 Buick Estate wagon with a good running big block,it was a beauty. Enjoy your videos,keep up the good work.
Love the paint. One thing that keeps amazing me is the amount of timing you can run on these engines on pump gas. Our gas is obviously crap in New Zealand.
I really love the wagon project. When I was a kid we had family friend with a '93 caprice with a LT. That thing hauled!! Going to be sweet to see the family fleet!
Great job Kyle,but do you not now the technical tho do I’m wood straps or with fancy glitter than you can make a copy from you father on putt him behind on a trailer that would be also amazing man but it is yours a I’m only giving some ideas good luck 😊
Tell you what that thing's going to be nice just over 1,000 horsepower and right around 1,000 foot pounds of torque. And the torque looks fantastic, especially if he's going to be going through the sand. He should be very happy with that combination. Great job! Kyle
I'm pretty sure your first paint job is going to be pretty average buddy. But we live and learn, ay Kyle. Good luck going forwards mate. I love your work. Cheers from New Zealand
Yes, i came here from your dad's channel but you just got yourself one more subscriber. And, thank you to the Morris family. Your videos are both entertaining and educational. Great job guys! With love, from Sweden.
With the wagon I think to offset not having a King Kong carbon footprint bent V8 SM planet destroyer you should use a protected endangered tiger skin to trim it……joking, I think light tan would work 😂
+1 for the green interior. Or maybe some kind of red/maroon. Black would work but probably too understated for this one. I think tan or cream or similar lighter colours would not go well either the gold/yellow exterior.
How much green and where depends on your overall vision/direction you want to take her and can be a very expensive long-term decision. I'd be weary of the "too much of too many" vs the "too much is enough" design vibes (SoCal v UrbaBling, TactiCool v Tactifool, chrome *or* polished v chrome *and* polished, etc). Also keep in mind that dem's Packer's colors......
Thinkin’ I’d get out the paint marker and mark where you’re at on the damper for timing, as it sounds like the timing marks are kinda hokey and to avoid confusion in the future.
Box in the whole rear of the wagon and put somw 12s or 15s in it like alot of em make it a badass lowrider no space left in the back all beats lol haha that's perfect lowride get some hydraulics got the pancake side ta side rolled 3 wheel motion beaten the block down with 65kwatts of bass rattle stuff off the walls half mile away
Can't wait to see you winning trophies with the wagon. She's going to be a sick ride. IDK about money green, buuut it makes sense. Keep on keeping on Lil Brother, you're doing a fine job and learning a lot along the way. 🙏🏻
Money Green !
🤮🤣
Velvet, dingle balls, and a mural somewhere...
Curb feelers
Where's your hydrologics for 3 wheeling, lay lace over the car and spray it another color its an old school trick
Kyle been doing this for 20 years if you want free labor message me, purple velvet interior
So glad kyle is one of the rare one on youtube that gives us some sbf content .....a little bit of it all type of content but has a lot of love for the ford engines ..thank u very much appreciated 💪
Thanks for the Ford stuff. 😎👍🇺🇸 Would be great for dad to build some billet ford heads blocks and even coyote stuff.
It's crazy listening to mini Steve Morris. Sounds just like him. And I love it. :)
Hey Kyle it's really good to see some Ford stuff! Keep it coming!
Just watched the Old Mans Video. You are learning our old ways and getting better. Still laughing at your Dad laughing in the background. One day you will be able to set timing by ear. I bet your Dad can also. NOTE.... Only fine wet sand it to get rid of orange peal then compound and wax
Great job Kyle. I like the use of basic lower dollar parts in your Windsor build. I have had great success with the 351W platform. Keep up the Ford content.
Great content!!! Would love to see the truck once the turbo small block Ford is back in it and it’s running at the dunes. 👍🇺🇸👍🇺🇸👍🇺🇸👍
Enjoy your dialogue along with the changes you make to get more power...
Kyle always use blue thin linetape on all your high edges your buff or sand saves you from burning the edges
Yeah that wagz needs green interior for sure 👌 full green leather.
Fuel tech video, maybe mention to your dad? 5362.6HP fuel tech twin turbos, Turbosmart Boostgate 50 no waste gates on the exhaust side might want to check it out, what is interesting the two intakes has a cross over and the one gate controlling both sides. You look really comfortable looking forward to you content like SRC you guys will hit different audiences should be fun.
Love your explanation style. Your dad is great but too much information for me.Great you two.
Keep up the Amazing Work love your Channel !! The wagon is looking Awesome !!!
Use dish soap in your wet sanding water. And sand by hand until you have it mastered. If you insist in the da, skip the 600. It will be less chance burning through. Good luck...
Yes sir Kyle my kind of fun 💪🏼🏁👌have a great weekend bud ok later
Barry Meguiar, great Christian!
Bag it!
White with bold money green trim!!!❤❤❤
Avoid the green interior at all costs. But the car itself looks sweet good work young man. You got good Family and again Love them SBF's so glad you have a channel now Kyle thank you for this content. God bless stay safe young man
Green for the money gold for the honey! Pimping ain't easy
Just watched your dads channel. You will get like us old builders and will be able to time by ear.
Kyle put tape on all sharp edges it will keep from burning the paint....also use da with soft pad
Yall Kick Ass key up the great work!!!!×!🎉🎉🎉🎉🎉🎉🎉🎉😂😂😂😂❤❤❤🎉🎉🎉🎉🎉🎉
Sorry, for that exterior, I see a mid brown tan leather on the seats and matching door cards. For the carpet, a darker brown.than the seats. Maybe four or five shades? And I use that brand car polish, it works pretty well for me if you keep your pads clean.
I hate body work sorry Clark. Can’t wait to see it live . Be seeing you soon the29th hub dyno my vette. Blowen 434 holly hp EFI.
Thanks heaps for the inspiration to paint my race car as it will be my first too
Hi Kyle I used to use Maguires products until I came across cartec products
After using cartec cutters and polish products I’ll never go back to using Maguires night and day difference in the bringing out the colour yes more expensive but 200 percent better finish
Congratulations on branching off and making your own channel new subscriber👍🏻 can’t wait for some kick ass videos👌🏻
Don't be too hard on yourself Kyle it's your first time painting buddy you're doing pretty good in my opinion. Too bad you couldn't get your Wheels re-chromed.
PLEASE do not put a money green inteior in your cruiser,my pick would be saddle tan\brown with yellow stitching.
The paint job is looking grezt,I love the wagons,I had one like yours,wish I had it back.
My real wagon was my 70 Buick Estate wagon with a good running big block,it was a beauty.
Enjoy your videos,keep up the good work.
Soo cool. Bass Pro would be proud. great first paint job Kyle.
You owe us a shot for every “umm”
Looking good, Kyle. Thanks for the video.
Great Work Kyle!
Money green interior in "Goldie Locks" 🥰😍
Money green interior, that’s ghetto!
hell yes on honesty and learning
that wagon is going to be awesome can see it slammed and get it on race would be cool
Money green with Benjamin‘s face on the headrest 😂
Love the paint. One thing that keeps amazing me is the amount of timing you can run on these engines on pump gas. Our gas is obviously crap in New Zealand.
If the lowrider graphics is same green as interior than it would probably make the green interior make sense ..cars turning out looking good 👍
Metal flake green interior like the old schwin bicycle seats.
Not fair, u and dad posted a video within minutes of each other lol
Great video! Need some Kyle Morris killer house of horsepower swag!!!
Pro Systems carbs are the best!!
I really love the wagon project. When I was a kid we had family friend with a '93 caprice with a LT. That thing hauled!! Going to be sweet to see the family fleet!
Always looking forward to the thursday vidyas!
Great video. Go Kyle
That thing is gonna be an absolute tire shredder in a street truck. Gonna be tons of fun for sure.
Great job Kyle,but do you not now the technical tho do I’m wood straps or with fancy glitter than you can make a copy from you father on putt him behind on a trailer that would be also amazing man but it is yours a I’m only giving some ideas good luck 😊
Great content thanks for sharing
Back in the 1900s we used to know those spots as checkers
Great video Kyle.
Tell you what that thing's going to be nice just over 1,000 horsepower and right around 1,000 foot pounds of torque. And the torque looks fantastic, especially if he's going to be going through the sand. He should be very happy with that combination. Great job! Kyle
With that color paint I'd go with Tan or Black with gold stitching Interior, Just a thought brother..Most people just ignore me so no big deal!
@@scottdawson8844 like the Tan thats in it or more peanut butter color?
Sand it back to 800 grit then re clear the whole car should come out super slick and shiny
Black or peanut butter interior! 🔥💯
I'm pretty sure your first paint job is going to be pretty average buddy. But we live and learn, ay Kyle. Good luck going forwards mate. I love your work. Cheers from New Zealand
Great video.
Green Green GREEN
Gold flake fifty's dinners upholstery with money green piping and inserts
Great combo horse power and boat flake paint
Go total shagging waggin with the green interior!
Yes, i came here from your dad's channel but you just got yourself one more subscriber.
And, thank you to the Morris family. Your videos are both entertaining and educational. Great job guys!
With love, from Sweden.
You are the man!
Fire orange interior . You should get the painter from kounts kustoms he does wild lowrider graffiti
Golden peanut butter jam !
Everyone's gonna want a wagon
The wagon is looking good.. can't wait till she's finished
With the wagon I think to offset not having a King Kong carbon footprint bent V8 SM planet destroyer you should use a protected endangered tiger skin to trim it……joking, I think light tan would work 😂
Super awesome, build.
Love your channel!! As a SBF fan also!
Not so much your dads.
Ego is super important, in life.
Hey Kyle, enjoying the channel learn from the old guy while you can.
+1 for the green interior. Or maybe some kind of red/maroon.
Black would work but probably too understated for this one.
I think tan or cream or similar lighter colours would not go well either the gold/yellow exterior.
How much green and where depends on your overall vision/direction you want to take her and can be a very expensive long-term decision. I'd be weary of the "too much of too many" vs the "too much is enough" design vibes (SoCal v UrbaBling, TactiCool v Tactifool, chrome *or* polished v chrome *and* polished, etc).
Also keep in mind that dem's Packer's colors......
22:45 - Sam the shine person on another YT channel, might be admiring your work right now. Looks super reflective in the sunlight. 👀🏆
Interior wise,id go black and gold, or wood grain and gold
Thanks Kyle . No green interior and change the wheels , please.
Awesome FORD content! Earned a sub,Keep it up
Cool 😎 video car going to look good when it's done awesome ford small block...keep living the dream ✨️
That car is blowing kisses in the sunlight
Excellent channel. Great content
Anything sanded 3,000 grit or higher will buff out super easy. You will get plenty of interior ideas at the car show!
Super Parent watching ,guiding not interfering
Thinkin’ I’d get out the paint marker and mark where you’re at on the damper for timing, as it sounds like the timing marks are kinda hokey and to avoid confusion in the future.
Learning from the Son thank you Don AUSTRALIA
Box in the whole rear of the wagon and put somw 12s or 15s in it like alot of em make it a badass lowrider no space left in the back all beats lol haha that's perfect lowride get some hydraulics got the pancake side ta side rolled 3 wheel motion beaten the block down with 65kwatts of bass rattle stuff off the walls half mile away
Can't wait to see what the wagon looks like finished have you set a date for testing @ tune on the mustang
Money green
thanks kyle
Oh goodie.....I've been hoping for some small block ford stuff. A++
rhino lining the under part of the trim. Would look sweet and no see any street/tire marks.
She pops!
Astro Turf! Go Green!
Really like the metal flake on the draggin wagon
Jerry,ATM carburetors are the best new carbs.try one
Sand or buff up to the seam or edge. Do NOT sand or buff the seam or edge. When you are done, you can't even see it.
looking good!
Money green interior, no! Money green ground fx? Hell yeah!
awesomeness
Can't wait to see you winning trophies with the wagon. She's going to be a sick ride. IDK about money green, buuut it makes sense. Keep on keeping on Lil Brother, you're doing a fine job and learning a lot along the way. 🙏🏻
"I don't know, I have no clue." These words with a carburetor underneath with Kyle's face on top will be the next t-shirt on the merch site.😁
i wanna pull my sniper off and go blow through carb now... lol. nothing but issues