Very impressive well-made video. I have the same vehicle and the same need with a wheel set in mind. I wish you all were local to me here in the Maryland area. I guess I could always do a road trip once the gas prices chill out again. I will check out your website for the part list you mentioned. Thanks again and take care.
I had the 3.5” sst lift on my 2019 ram. And the front is just above 38” from ground to bottom of fender. The rear gianed a true 2” lift and is at 41” in height. Prior to having it installed the front was right at 38” with my 2” leveling kit. Why did I not gain any addition lift in the front??
So how tight do you tighten the 4 rear control arms after the springs are in, and did you do a alignment once everything was together? I've also been told the front control arm needs to be tighten once the truck is on the ground so it dont wipe out the bushings, is there any truth to this?
It shows 2wd/4wd on the website. Can I install this on a 2wd? I know it seems like a straight answer but I am hearing conflicting things on different websites and videos.
I install a 3.5 lift similar to this and have 24s on 35 just went to rotate my tire rear ones are smooth but front ones are not had balance and alignment ride has a little vibrant. Tire guy said i need longer struts but can't find for 3.5 lift. What do u recommend
No not yet.....but if it’s the FAB-K3168 it’s has the same components. So this video should help out. The only thing difference is that this was a 2WD so we didn’t install the diff spacers.
I installed the K3167 and brought the truck to a good stance. I noticed that the measurements from the tire to the fender in the back is about 9.5 inches and the front is about 7.5. I thought that the numbers would be even but I only assumed that the kit was also a leveling kit. This is a 2020 Dodge Laramie.
@@rgotchu Did you noticed that much of a difference before you installed the kit? Yeah that kit is just spacers and a arms so I the only thing that could have caused the difference is the a-arm? Have you contacted Fab tech to see why ? We didn't notice a difference in the one we did with the ReadyLift kit
On the ready lift website they said this would fit 35x12.5 on 20x9. From what you can see is this realistic. I worry about the tire hitting the upper control arm and or rubbing.
Ok in the video we used the factory tires but if you look at the thumb nail we changed out to tires to 35x12.50 20 on the stock 20s. I want to say they are 20x9 or maybe 8.5 wide and if I had to guess on the offset I would say +15..... so as long as you stay within those parameters you should be good. There was no rubbing on the upper a arm and we didn’t have to trim.
@@martinsuarez1870 I have a video uploaded on my channel. Should be able to find it by searching for me. However I am going to be removing the ready lift set up very soon. I explain some of the reason in my video but basically I don't like the ride at all and it is very noisy. Started squeaking really bad recently. Although I'm dropping down to a 2.5" level I'm super excited to be getting a Carli performance package installed on it. It's a lot more money but I love the truck and want to love the ride. To me that's more important than the look.
You notice how they say it looks nice but that drive like shit I own at 2021 ram Just spend a little bit extra money and get the coil over boil overs are you will not be happy and will want to take this lift out and put a better one i
Mannnn I was with you until you cut off those threads off. Those will not hit. Now you screws that person if they ever want to take that lift off and go back to original.
awesome detailed video, wish there were more people doing videos like this. thanks!
Thanks!
Very impressive well-made video. I have the same vehicle and the same need with a wheel set in mind. I wish you all were local to me here in the Maryland area. I guess I could always do a road trip once the gas prices chill out again. I will check out your website for the part list you mentioned. Thanks again and take care.
So why didn’t you change out rear shocks?? Didn’t you add spacers on the axle
Great job and thank you so much. Appreciate your unselfishness.
I had the 3.5” sst lift on my 2019 ram. And the front is just above 38” from ground to bottom of fender. The rear gianed a true 2” lift and is at 41” in height. Prior to having it installed the front was right at 38” with my 2” leveling kit. Why did I not gain any addition lift in the front??
Does this truck need a differential drop kit to keep the cv axles straight?
This truck is a 2wd drive. But the kit is for either or and doesn’t come with a diff drop
@@BreakersStereo do they sell diff drop kits for these trucks?
So how tight do you tighten the 4 rear control arms after the springs are in, and did you do a alignment once everything was together? I've also been told the front control arm needs to be tighten once the truck is on the ground so it dont wipe out the bushings, is there any truth to this?
Could you use spring compressors in the rear vs disconnecting everything
Hi, can thiscbe done in the same truck but 2wd?
Great/informative video. Thanks.
How many mpg did you lose with the 3.5 lift?
Doing this type of lift, how does effect the overall ride?
Can you guys do a zone 6 inch lift for the same truck?
Is this a 2wd? Where is the front CV axel?
Yes 2wd
It shows 2wd/4wd on the website. Can I install this on a 2wd? I know it seems like a straight answer but I am hearing conflicting things on different websites and videos.
How much would you charge me to install this kit
I install a 3.5 lift similar to this and have 24s on 35 just went to rotate my tire rear ones are smooth but front ones are not had balance and alignment ride has a little vibrant. Tire guy said i need longer struts but can't find for 3.5 lift. What do u recommend
Ok let me see if I can help ... first what year is your truck and what kit do you have?
Good stuff.
Will 20x12s on 33s work with this kit
It would need major cutting..
Can we put 22x12-44 with 35’ tires with this lift on Ram 1500 2021 ?
Not recommend unless you really want to cut a lot. I would suggest a taller lift. 6” +
W are this place i need lift my truck
Do you have a video for installing a 3inch Fabetech lift for 2020 Dodge Ram 4x4 Laramie?
No not yet.....but if it’s the
FAB-K3168 it’s has the same components. So this video should help out. The only thing difference is that this was a 2WD so we didn’t install the diff spacers.
I installed the K3167 and brought the truck to a good stance. I noticed that the measurements from the tire to the fender in the back is about 9.5 inches and the front is about 7.5. I thought that the numbers would be even but I only assumed that the kit was also a leveling kit. This is a 2020 Dodge Laramie.
@@rgotchu Did you noticed that much of a difference before you installed the kit? Yeah that kit is just spacers and a arms so I the only thing that could have caused the difference is the a-arm? Have you contacted Fab tech to see why ? We didn't notice a difference in the one we did with the ReadyLift kit
On the ready lift website they said this would fit 35x12.5 on 20x9. From what you can see is this realistic. I worry about the tire hitting the upper control arm and or rubbing.
Ok in the video we used the factory tires but if you look at the thumb nail we changed out to tires to 35x12.50 20 on the stock 20s. I want to say they are 20x9 or maybe 8.5 wide and if I had to guess on the offset I would say +15..... so as long as you stay within those parameters you should be good. There was no rubbing on the upper a arm and we didn’t have to trim.
I also installed the 3.5 ready lift and installed 35x12.5x20s on the stock rim. I only had to trim the far inside of the splash guard I installed.
@@brandonperschon449 can you share a pic of your truck? I'm thinking of doing the same setup with the same stock wheels in the video
@@martinsuarez1870 I have a video uploaded on my channel. Should be able to find it by searching for me. However I am going to be removing the ready lift set up very soon. I explain some of the reason in my video but basically I don't like the ride at all and it is very noisy. Started squeaking really bad recently. Although I'm dropping down to a 2.5" level I'm super excited to be getting a Carli performance package installed on it. It's a lot more money but I love the truck and want to love the ride. To me that's more important than the look.
Nice
You notice how they say it looks nice but that drive like shit I own at 2021 ram Just spend a little bit extra money and get the coil over boil overs are you will not be happy and will want to take this lift out and put a better one i
Mannnn I was with you until you cut off those threads off. Those will not hit. Now you screws that person if they ever want to take that lift off and go back to original.
Its not even a 4wd what the hell 😂😂😂
Who cares?