Необычный, яркий и красивый пейзаж! Но, до чего же кропотливый в исполнении этот твой квиллинг! Хотя, любителей это может успокаивать...у тебя все получается! Желаю дальнейших успехов!
This is so beautiful! Do you have to apply a layer of glue on each piece as you put it down? Or a layer of glue in sections then apply the clay? I would love to try this!
Thank you ❤️I didn’t add glue to each piece, clay was sticky on its own. I waited until it was completely dry after drying it turned into one piece then separated it from the base then applied glue to the back
Thank you for this video:)! I want to do this with polymer clay, but what can i use as a base? Not sure if you can use wood in the oven. Any ideas? 💗xx
Hi Lena! Lovely tutorial, many thanks! I have one question though, when do you put the glue? Before you put the pieces of clay or at the end? If you do it at the end, how do you do it? Is that regular glue or a special one is required? Many thanks for sharing your work!
Thank you for your comment 🥰 Gluing really depends on a surface of your base, sometime clay gets stuck on it own and you don’t need to glue it but if you feel it doesn’t wait until it dry. Glue everything when the clay is completely dry(mine took like 2-3 days) then if you put all of the little swirls close enough to each other it pretty much made it into one whole layer, so it shouldn’t be a problem to remove that layer from the base. Then apply the glue to the base & attach the clay picture. I used epoxy resin to glue it but I believe most of the multi purpose glue will do.
@@StudioDeSol i dont think duster will take out dust from deep layers of clay..and veccum will suck the clay it self or can break clay due to harsh Air suck.. U see after 1 or 2 months when dust forms inside..u will know its difficult to clean.. I have tried this type of design long back..
Share with me if you liked this tutorial❤️
Делитесь со мной если вам понравилось это видео❤️
You should be nominated as a polymer clay genie , it’s amazing ❤.
Awe thank you🌸🥰
Very beautiful! Thank you for sharing your tutorial!🥰
Its amazing art thank you for sharing your work well done beautiful
It's beautiful and I always love unique work... Best of luck🌹
How is it sticking to the wood after drying ?
Thank you for posting a video that actually answers some of my questions!!
🥰🥰🥰
I LOVE IT SO MUCH. IT'S GORGEOUS
Its beautiful i will try insha Allah
Необычный, яркий и красивый пейзаж! Но, до чего же кропотливый в исполнении этот твой квиллинг! Хотя, любителей это может успокаивать...у тебя все получается! Желаю дальнейших успехов!
Спасибо 💚
Огромное спасибо за такой интересный, замечательный урок. У вас золотые руки.
Very beautiful!
Omg this looks stunning ❤️😍👌
Лена, очень необычно и оригинально! Спасибо за творчество!!!
Спасибо большое 🥰
Excellent video! Thank you! I wonder how this piece has held up well over a year later?
Amazing piece of art 👏👏👏🖼 also, you look beautiful 🤩
Awe 🥺🥰💚thank you
Wow it came out so beautiful 😍
🥰
So cute 💖 ☺
🥰
Hi. This is so detailed. How do you make sure the clay doesn't dry while you are working?
I was keeping the clay in a plastic. I was using just a small piece of the color I was working with
Do you apply glue to wood surface or the clay just sticks itself
Clay does stick to the surface but to have a better grip you can add glue to the base
Is this possible to make this artwork with foam clay? plz answer
If I’m not mistaken it’s a same kinda clay I use in this video so I’ll say yes
This is so beautiful! Do you have to apply a layer of glue on each piece as you put it down? Or a layer of glue in sections then apply the clay? I would love to try this!
Thank you ❤️I didn’t add glue to each piece, clay was sticky on its own. I waited until it was completely dry after drying it turned into one piece then separated it from the base then applied glue to the back
@@StudioDeSol thank you so much for getting back to me. I hope to create something as beautiful as this.
@@StudioDeSol Any suggestions on how to remove it in one piece without breaking it?
Thank you for this video:)! I want to do this with polymer clay, but what can i use as a base? Not sure if you can use wood in the oven. Any ideas? 💗xx
You can bake on a wood but be ready it might start smelling because the oil in a wood heats up.
Metal or glass surface can do.
Obsessed
Hi Lena! Lovely tutorial, many thanks! I have one question though, when do you put the glue? Before you put the pieces of clay or at the end? If you do it at the end, how do you do it? Is that regular glue or a special one is required? Many thanks for sharing your work!
Thank you for your comment 🥰 Gluing really depends on a surface of your base, sometime clay gets stuck on it own and you don’t need to glue it but if you feel it doesn’t wait until it dry.
Glue everything when the clay is completely dry(mine took like 2-3 days) then if you put all of the little swirls close enough to each other it pretty much made it into one whole layer, so it shouldn’t be a problem to remove that layer from the base. Then apply the glue to the base & attach the clay picture. I used epoxy resin to glue it but I believe most of the multi purpose glue will do.
It willbe difficult to clean this art piece if dust form inside the folds..
I think you can use the duster or vacuum 🤔
@@StudioDeSol i dont think duster will take out dust from deep layers of clay..and veccum will suck the clay it self or can break clay due to harsh Air suck..
U see after 1 or 2 months when dust forms inside..u will know its difficult to clean..
I have tried this type of design long back..
@@anaya4472 I had tried something similar and made a deep cardboard frame with an acetate sheet pasted to the front. That solved the dust problem
@@ntea2261 thats great😍👌
Dry dusting with a small paint brush also helps. So does spraying a water based varnish after the paint has completely dried.
How long did it take for you to make this?
3-4 hours
is this foamic air dry clay?
Yes
I love ti💕💕💕
🙏❤️
Новая прическа, новая идея! Весна близится!
❤️🥰🥰🥰даа
I got Van Gogh vibes 🙀🖼
That’s right 😏it’s impasto technique 💚
Do you prefer the airdry clay or polymer clay?
I like the durability of polymer clay, but the air dry clay is also nice for different kind of projects
Do you have a video slower on how you fold the clay. Mine looks like a folded over taco!
No unfortunately I don’t have any other footage available