【加工動画08 part2/2】巻取装置/Self-lock winder
HTML-код
- Опубликовано: 28 фев 2020
- ウォームギアを用いた巻取装置を作りました。
撮影機材
amzn.to/30LfJIE
part1で作製したウォームホイールを使用しました。
ウォームギアは大きな減速比が得られるだけでなく、進み角が摩擦角以下であればセルフロック効果があり、吊り荷の加重で逆転しない(ウォームホイール側から回転が伝達されない)のでエレベーターの巻上機などに用いられています。
Thank you for watching.
A winder using a worm drive is made using a worm wheel made in part 1 of the winder using a worm drive is made.
The worm drive is not only used for large reduction ratio, but also for elevator hoisting machines because it has self-locking effect if the advance angle is less than or equal to the friction angle, and it is not reversed by the weight of the suspended load (rotation is not transmitted from the worm wheel side). - Наука
part1/2 旋盤で歯車/Worm wheel made with lathe
ruclips.net/video/RW8_F5NQHGY/видео.html
I love your work! Makes me think of my grandfather, he was a tool and die maker/machinist for GE/MPD he would tell me stories of things that he made, the smallest end mill, so on. He told me about this one drill bit he made, extremely small smallest that his shop could make! Sent it to Japan, kinda look at this! Smallest one ever!!! They sent it back, with a hole drilled through the shank with the smallest string through it. One the string they made a tag just wrote Japan! He shared that story with me, with the moral of the story being humility, and perseverance!
こう言う動画を観るとミニ旋盤買って遊びたくなるw
加工技術もすごいけど、何を作るか考えるのもすごい。
こんにちは。私は日本からの挨拶。楽しい動画を有難う。
An excellent project I might try to make one myself thank you
this is absolutely amazing!
A single pitch worm and worm gear are inherently self- locking; another benefit is that a worm and worm gear set actually improves as it wears in, while all other gear types wear out and degrade over time and use. ☺
What a cool little winch!
It works!
:)
Excelente peça parabéns.
Thanks for the video!
I think he's a guitarist, perhaps bass guitarist.
Maybe thats how he got the worm wheel!
A fine machinest.
Watch part 1, (pinned comment) he actually made the worm wheel from scrtch using a toolmade from a bolt.
Muito bom amigo
your videos are so good
best professional!
汎用旋盤が欲しくなる動画だぁ...
Amazing, even the face in the piece IoI Haha, greetings from Mexico, beautiful video
Excellent work thank you for sharing. :o)
Jo era torner; i el món laboral va fer que tingués odi a aquest treball. Ara que estic jubilat i gràcies als teus vídeos, estic recuperant la il·lusió d'aquest art.
respect !!!
Amazing..... from Brasil.
ミリネジ用って、難しいですよね!!
かと言って、一般的な歯車規格サイズは、購入すると高いです。
今はスマホで見たのですが、後でPCでしっかり研究したいです。
今後も特殊な器具・治具の作り方を勉強させて下さい。
ご視聴いただきありがとうございます。
嬉しいお言葉もありがとうございます!
nice, what backlash has that mechanism? is precise?
G day Mate, was I seeing thing’s I think that thread was plunged cut is that right, all good with me 👍👍
So.... wtf is it? A winch or some fancy tool I didn't even hear of?
I don't your language but you do work very interesting
What is your education ? . Your ideas are interesting
He seems to be a guitarist.
That's how the tuning heads of guitars work.
The worm prevents backlash.
Мини-лебедка, шары, гироскоп+автор из Японии. Он собирает десептикона. В миниатюре.
Похоже на то. Выводит всё досконально, уверенно. Будь у него ЧПУ станок, он бы уже армию сделал и завоевал весь мир.
Лайк, подписка!
Hello, what RPM's you used in the first 1min of the video? I struggle to get that good chips when taking a lot of material at once.
And what is the material?
Thank you for watching.
It is 550 rpm.
The material is free-cutting steel containing lead and has low cutting resistance.
Which oil do you use
Thank you for watching.
The cutting oil is Castrol's Variocut C210.
congratulations on the video !! lots of creativity intelligence dedication ... congratulations !! continue straight so!!
I would like to ask for something !! please, could you show your machining machines, lathes, make, model ?? !! 動画おめでとうございます!! たくさんの創造性の知性の献身...おめでとうございます! 常にそれを維持してください!!
お願いしたいです!!
あなたの機械、ブランド旋盤、モデルを見せていただけませんか?
ご視聴いただきありがとうございます。
励みになる嬉しいお言葉、感謝いたします。
こちらの旋盤は「ワシノ」という日本工作機械メーカーの「LRー55A」というモデルになります。
И для чего такая сложная приблуда? Чтобы поднимать молоточек дрелью????
Вы серьезно??????
Да это ж Членоподниматель🤣🤣🤣🤣
Кажется я знаю как прокоментировал бы сие изобретение "Доктор дью"
🤣
Спасибо за просмотр.
Это намоточное устройство представляет собой миниатюру, созданную для эксперимента.
Это одна из частей, которые я планирую включить в оборудование, которое я собираю.
Завершение будет долгий путь, но, пожалуйста, с нетерпением жду этого.
Членоподниматель здесь ты, дружок. А данный человек показывает возможности токарного станка, тем самым доказывая что он универсальный станок. Можешь посмотреть это по его другим роликом. Так что полнояхуйняметр Дью не покажет не одного полуляха.
@@user-sm7uh3mr9e да ты че? А я и не знал, а воообще я в курсе что человек показывает в подобной тем атике а токарный станок настолько универсальный что можно не только стандартные штуки точить но и очень нестандартные. Сам Токарь.
Но городить такую мега нана альфа технологичную конструкцию чтобы вешать молоточек это пиздец. Но раз это устройство для какого то оборудования то тогда все норм.
@@Nik99999 Он всего лишь показал метод и способ , качество . А ты этого не понял ...
@@Nik99999 - было бы хорошо, если бы ты просто помолчал.
Qual é o material utilizado no eixo? Excelente usinalibilidade.
Thank you for watching.
The material is a free-cutting steel named SUM24L.
@@SwaplampJapan Equivalente SAE?
8:07 no... just no.
Зачем эта приблуда?
:)
.
Valla muerda a e cho