Lenovo Yoga 700 keyboard replacing cheaper way
HTML-код
- Опубликовано: 10 сен 2024
- This video would give you a complete procedure of how you can easily change your #Lenovo #Yoga 700's keyboard unit.
Basically, in the market, most of the slip laptop/notebook PC's #keyboard replacement come with the actual PALMREST TOUCHPAD KEYBOARD unit. Which is easy to replace but it all the time expensive rather than the actual keyboard unit itself.
My target and aim always minimize the repair expense in the event of repair gadgets...
so in the video which procedure I have applied definitely it would show you the way to fix your Lenovo #Yoga_700's keyboard.
There is one principle that you should keep in mind that is nothing else rather than your patience !!!
Note: please please do not take rush while you desolder the metal keyboard backplate !!
warning: very very careful while you use the soldering gun to remove the plastic rebits!!
please do not forget to leave a comment on how you think about this video!!
if you like this video please do not forget to subscribe my channel for the more future video!!
KEYBOARD REPLACEMENT LINK amzn.to/2VDBdF9
LENOVO YOGA CHARGER amzn.to/3lHXGf4
=================================
Follow us: / thepcphone
follow us: / thepcphone
follow us: / thepcphone
like us: / thepcphone
I fixed my 710 after watching this video, very similar operation. Only the new after market keyboard was lower so I put few double tapes under the metal plate to raise the new keyboard.
Also after market keyboard doesn't have backlight, I left the backlight socket empty, it works without any problem.
What about for the Lenovo Yoga 720-15ikb keyboard, the frame as far as I know is metal, would the keyboard still have plastic rivets or the internal frame be plastic or does it not use plastic rivets completely?
Edit: The 'metal' frame is actually a thin sheet of metal that covers over a plastic chassis, and the plastic rivets are still present, I did this repair and replaced the melted rivets using some black ABS plastic filament used for 3d printing and melted that in place of the rivets, it holds fine but I didn't apply enough pressure on a small part of the keyboard which now has a little droop which also hinders the blacklight, but at least the keyboard now works.
Thank You, You've made it look fairly simple. Fingers crossed that I can do this. I will be PATIENT :)
Hello! I have a lenovo yoga 720 and my flex cover / hinge cover is more sunken and the screen protrudes. Do you know if I can solve it by taking it to a technician and leave it as good as new?
My laptop was not turning on and also my adapter was blinking then
I tried mentioned methods in lenovo forums
I removed battery, removed Cmos connector, then held power button for one minute and then without connecting battery provided a direct power to laptop, it blinked for
But it blinked for a second and then went dead. Then on youtube a guy showed a step "to remove keyboard connector flex and then turning it on by novo switch and it worked. So now keyboard is dead but laptop is working. Is there any way to solve the issue
Kindly help
it's hard to keep the plastic rivets in it's state after detach the old keyboard
that's make remplacement very hard and risky 😢
you are absolutely right. FOr me, i don't worry about to keep the plastic rivets as its not that important. Because when you put the motherboard on pleasing and screw it correctly then it should be fine. But do not any rivets dents or smashed head otherwise it would give you trouble later to put the keyboard in right alignment.
Big help, thanks 👍
Appreciate the support, make sure to subscribe with notifications to keep up to date with new videos!
@@thepcphone Do you have a "donation" site? I like to pay 10 USD when I get help from youtubers to fix stuff.
What happens between the 3: 30 second mark and the 4:15 second mark? The video goes black you can't see anything.
Sorry for the trouble, I think it's an advert issue! let me know if you need any help about this tutorial!Hope to see you again into my channel! Please do subscribe to show your support ! Thanks.
I figured it out and swapped out the keyboards. Thanks !
Do you need a soldering gun to rremove the plastic rebit?
Its my way as it does help a lot , But be careful about to use it !!
I swear it's like the slim 7 16iah doesn't exist amazing specs but the repairability is a nightmare
Thanks for the video! I'm trying to fix my 730-13IKB this way. But I'm struggling to find cheap portuguese keyboards for the 730. However, I found a couple for the 720 and 920 - do you know if they are compatible with the 730? Or how can I check that? Lenovo spare part codes won't help because they all include the palm rest. Palm rest apart, the 720, 730 and 920 "look" pretty much the same.
Glad I could help! Yes those are almost similar. If you have patience and the right tools, I think you can do it. For further help please Contact me Instagram @Thepcphone_
Hope you would subscribe to see you around my channel! Thanks
Did anyone replace the YOGA S1 keyboard adapting a cheaper one? the original model is kinda expensive
Can i get the complete model number? So I can see
@@thepcphone the part number is 04Y2620
do you ahve a link to where i can buy that keyboard?
amzn.to/2VDBdF9
@@thepcphone thanks dud
thx
Welcome sir. Hope see you again in my channel.
Sloppy job, they keyboard is a lot lower.
how much it cost
around £20 pounds !!!
this is safe
sorry !! I did not get you!! did you mean is it safe the repairing process??
yes
Top tip get a new cameraman
Plastic revet is poor engineering of lenovo , the yoga series is pathetic engineering. What can you expect of a Chinese product ?
Vinay, you are absolutely right! Mostly the Ideapad series but Thinkpad kept the balance. Hope to see you again on my channel.Thanks for your time.