@@filiptomek3695 полагаю это просто для демонстрации, ведь при желании, можно просто приварить всю конструкцию, или закрепить болтами на подобии мебельных, где шляпка болта вообще не имеет шлицов.
I saw the first latch in the video used on an old barn where my Dad grew up. (He was born in 1910, the barn was older than he was.) All the doors and gates in the barn had that type of latch. Then he built one for a gate to our pasture. It could be opened and closed from either direction, but used the same concept. It has the rings on either side. Those were not made from a section of pipe but were made from metal rod and formed into a circle using a forge and an anvil.
ДА....... Это актуально...)) Не зря говорят: "Все новое, это хорошо забытое старое"! Но в любом случае сохранил и благодарю за щедрость... С меня жирный лайк )))
The point is those lock mechanisms are easy and nice to use, and of your’s problem, just drill extra screw behind the mechanical bars that’s it, fixed.
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
Very nice designs and realizations. One flaw nevertheless : the locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to enter these rooms. If you can manage to have a indoor attachment, then this last problem is fixed. Anyway, again, very nice work.
Это всё знакомо но вот кто нибудь наладил производство чтобы можно купить в магазине кое что можно делать из пластмасы задейсвовать инвалидов заключены.
@@thanhnamnguyen2790 ích nhất người ta cũng có ghi nguồn tử tế, chứ không như một số bộ phận người Việt ăn cắp video, không ghi nguồn, còn tự nói là của mình
My dad built the loop latch back in the 80s with a steel ring with a bilt through it, sandwiched between a piece of 1" flat steel stock folded in half. It's on the gate to this day, so a testament to the design.
I like how all the latches in the beginning has all the phillips screws exposed. Not secure at all. Cordless screw gun has all those removed in less than 20 seconds
OMG! Youre so brilliant! Who would have thought! Lemme just float this though. What if, and Bear with me, the philips screws were for demonstration and ease of removal. Oh better yet, what if, when you make and mount this yourself, you used carriage bolts to secure the hardware?
7:54 The problem with any latch design which has exposed screws is that it can be easily defeated by simply unscrewing the mechanism from the door or door frame. In its locked position, all the screws should be obscured so they can't be reached by any screwdrivers. The mechanism should only be removable when it is unlatched.
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
Loved some of the latch designs, however, all the latches with locks have exposed screws attaching them to the door and door frame. A person with a cordless drill/screwdriver could be inside the locked room in about 3 seconds.
i like it for the creativity.. work and design.. even if you put studs in it bolted on the inside someone can rip a lock off in a few seconds anyway with a prybar
Great production. But it has one big flaw - the lock can be opened by unscrewing the cross screws. The lock must be made in such a way that the screw heads are hidden when locked.
Or use rivets, secures screws with welding or weld the screws to nuts on the backside: screw still spins, but nut wont come of. on some handles easy to cover the screws by moving the screw holes or enlarging the metal pieces to cover them.
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
Very practical ideas, but one huge problem.............your mounting screws are exposed. They can be removed and entry is possible. Redesign your mountings and your designs are thief-proof.
Cool latches but no real security. As built, none of them provided any level of security that could not easily be defeated. Excellent DIY for a low security need
I remember a few of these latches on farms of my youth and to see them and others come to life here is incredibly satisfying. I think i'll use a couple in an upcoming gate project or two.
for this design Hung Che reinvents the wheel (providing you have access to fabricating equipment costing a lot more than a latch of better quality would cost to buy)
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
В последней модели подходи с шуруповертом,и отворачивай саморезы-они пластиной не закрыты,и замок снимать не надо -снимется вместе с устройством после отворачивания саморезов.
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
Es ist wirklich sehr hilfreich wenn man sich dieses Hobby der Metallverarbeitung zulegt💡Ich werde im Zweifelsfall ganz sicher darauf zurückkommen und mir etwas dazu einfallen lassen👍
Die Schlösser sind nutzlos, da die Schrauben der Verriegelungen zugänglich sind und von jedem, der dies möchte, mit einem Schraubendreher abgeschraubt werden können. Meine Kommentare wurden von diesen Leuten gelöscht. DIE WAHRHEIT TUT WEH!!!!!!!!
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
het laatste slot is zo open te maken met een schroevenrdraaier. 3 boutjes zijn zo los. dan had je beter het bewegende deel wat breeder kunnen maken zodat de schroeven afgedekt zijn bij het sluiten. gratis tip. ;^)
The second latch and/or variants were to be seen on nearly every gate in the fence between front and back yards of houses in my whole suburb in NZ back in the Fifties. I should know, as I had to go around monthly collecting money for the newspapers I delivered on my bicycle.
The first one is a version of one that I first saw and photographed on a fence gate in the historic town of Rugby, Tennessee. That one was probably made by a local blacksmith and the ring was made from round rod.
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
Am i missing something here but with the round first one you open the gate via the latch and go through but when you come back you’ve now found your locked out!
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
It would be best to weld the bolts which are used to attach the latch, as if You have the screws and bolts visible, it's too easy to just remove them and open the door.
Идеи хорошие, даже очень!!! Но посмотрите на механизмы, которые должны закрываться замком. Там просто снаружи саморезы вкручены)))) Супер защита ))) ахахахах
very smart to use holding elements like bolts etc outside and use a lock ))) no need to have a picklock , need just a screwdriver to unscrew bolts to get inside... better to make longer "stands" to hold the construction with bolts from inside and outside part of construction to lock the door
все идеи крутые,но есть одно НО,там все на шурупах,а шурупы можно выкрутить,так что в этих задумках,лучше применить мебельные болты без граней и гайки.А так крутые идеи,класс!!!
Hey my friend, all these latches are screwed on from outside, so they can be easily be removed from outside by everybody. I would be happy to see locks and latches which are assembled from the inside and just has the "authorized user access" from outside. You showed that your skills and creativity are on a very high level, but the general concept needs to be improved from my opinion.
Снято красиво, только вот вся эта фигня - тюремная, для запирания кого-то. В смысле с другой стороны не открыть, разве что выбить, а с этой выверни шурупчики - и пожалуйста...
I love it I enjoy watching them make interesting stuff and watching them welding away on stuff and in the video there wearing sandals love it !!!!!!!!!!!
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
les systèmes de fermetures sont bien, par contre ne mettez pas des vis autoforeuses où à bois car vous prenez un tournevis cruxiforme et vous ouvrez :)^^
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
I wouldnt say inventor or designer, per se. Ive seen all of these before is some form. That being said the use of materials and production methods I would certainly call innovative!
Cool, wenn man so schöne Schlößer baut dann sollte man aber noch nenn Schraubenzieher daneben hängen damit der Dieb die Schrauben gleich heraus drehen kann. Cool🤕
Cảm ơn QUANTUM TECH HD đã giúp tôi mang lại thêm giá trị mới đến khán giả.
mẫu số 01 hay quá, yeah...
Я за свои 45 лет сделал всего 4 примерных защёлок . Сейчас желание пойти и некоторые переделать. Спасибо мастеру за показ такова видео.
Если на защелке есть висячий замок, для его открытия достаточно отвертки. (Защелка крепится доступными винтами). Это шаблон?
@@filiptomek3695 полагаю это просто для демонстрации, ведь при желании, можно просто приварить всю конструкцию, или закрепить болтами на подобии мебельных, где шляпка болта вообще не имеет шлицов.
А открывать как?
Выйдешь,захлопнется и в дом не войдёшь
@@Olenewod666 везде где есть висячий замок, делов не больше 5 минут.
I saw the first latch in the video used on an old barn where my Dad grew up. (He was born in 1910, the barn was older than he was.) All the doors and gates in the barn had that type of latch. Then he built one for a gate to our pasture. It could be opened and closed from either direction, but used the same concept. It has the rings on either side. Those were not made from a section of pipe but were made from metal rod and formed into a circle using a forge and an anvil.
And because they were forged.. they were very strong
The second type can be purchased at any Ace Hardware store in the US or from Trooper in Mexico or from Sinsa in Central America.
Bro but tell me what u will do if it gets locked from outside 😭
ДА....... Это актуально...)) Не зря говорят: "Все новое, это хорошо забытое старое"! Но в любом случае сохранил и благодарю за щедрость... С меня жирный лайк )))
I pray who ever sees this be successful in life ❤️
🤝
Did you really pray it or just type it?
God bless u. 🙌🙌🙌🙌
@@anmarfigueiredo8644 Amen
@@hawaiiandakine8304 🤣😂🤣
Need to tack welded the screws so you don’t just unscrew the screws and open the door
I was just going to say that those locks are worthless if all they have to do is takeoff the screws but then I seen your message.😂
The point is those lock mechanisms are easy and nice to use, and of your’s problem, just drill extra screw behind the mechanical bars that’s it, fixed.
I think these are just proof of concept, but you're definitely right
Just don't get yourself locked by accident..
Be quiet that's the spare key😁👍have no idea where the ice cream went!
It never ceases to amaze me what I will watch between 11.30 and 2am.
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
Very nice designs and realizations. One flaw nevertheless : the locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to enter these rooms. If you can manage to have a indoor attachment, then this last problem is fixed. Anyway, again, very nice work.
THEY DELETED MY SAME COMMENT.
Locks only keep honest people honest.
You can weld it
Just put bolts all the way through the gate, and double nut them, or weld them so they can't be removed easily.
@@40HDR hahahahahahaha 😁
Mình rất vui vì một kênh vlog của Việt Nam được một số bạn bè quốc tế chú ý đến 😀
Это всё знакомо но вот кто нибудь наладил производство чтобы можно купить в магазине кое что можно делать из пластмасы задейсвовать инвалидов заключены.
Ko biết lấy video đã xin phép chưa hay là ăn cắp
@@thanhnamnguyen2790 ích nhất người ta cũng có ghi nguồn tử tế, chứ không như một số bộ phận người Việt ăn cắp video, không ghi nguồn, còn tự nói là của mình
Привет! Ну ты друг мастер своего дела, очумительные самоделки, таких мы ещё не видели, молодец
Прикольно))) но часть запоров (с замковым фиксатором) легко откроются с помощью фигурной отвертки)))
С некоторыми системами можно самому остаться за дверью 😉
А с некоторыми можно случайно палец сломать.
А везде саморезы выкручиваеш и вуаля
Через два месяца все это заржавеет насмерть и работать перестанет. Арматура - совершенно не подходящий материал для таких изделий.
My dad built the loop latch back in the 80s with a steel ring with a bilt through it, sandwiched between a piece of 1" flat steel stock folded in half. It's on the gate to this day, so a testament to the design.
Can I ask how do you open this latches from the outside just incase you accidentally lock it and no one is inside to open it for you.
I like how all the latches in the beginning has all the phillips screws exposed. Not secure at all. Cordless screw gun has all those removed in less than 20 seconds
they're on the inside...
Yeah pretty pointless exercise really, like you say they can all be unscrewed
You need because it’s inside hahaha…you don’t know anything about construction?
OMG! Youre so brilliant! Who would have thought! Lemme just float this though. What if, and Bear with me, the philips screws were for demonstration and ease of removal.
Oh better yet, what if, when you make and mount this yourself, you used carriage bolts to secure the hardware?
@@john.c it's not a lock it's a latch
Qachondir meni videolarim ham shunday koʻrishadi🎥👍💕
Давай только не подведи))
👍😀😀😀
Top notch ideas!
I wish I had doors that need latches and the tools to make them.
🤣
@@peterbaxter8895, ?
@@АртурБ-т5г Not sure what the confusion is? OP made a joke, the joke made me laugh, pretty simple stuff.
Честно сказать очень впечатлен такими простыми вещами. Особенно понравилась первая защелка "колечко" Век живи век учись Спасибо.
Осталось только понять как ее снаружи открывать
@@MaratAG "Дёрни за верёвочку, дверь и откроется" - сказки читать нужно! :-)))
So proud of Vietnamese's human 👏 hùng chế rất giỏi
Красота механики своими руками) класс!
7:54 The problem with any latch design which has exposed screws is that it can be easily defeated by simply unscrewing the mechanism from the door or door frame. In its locked position, all the screws should be obscured so they can't be reached by any screwdrivers. The mechanism should only be removable when it is unlatched.
The first one looks like a great way to lock yourself in a room with no way to release it from the inside
unless you... I don't know, lean on it or put your foot into it.
Yes, no way I'd use it on my garage door.
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
What’s that terrible smell coming from the room??
Loved some of the latch designs, however, all the latches with locks have exposed screws attaching them to the door and door frame. A person with a cordless drill/screwdriver could be inside the locked room in about 3 seconds.
i like it for the creativity.. work and design.. even if you put studs in it bolted on the inside someone can rip a lock off in a few seconds anyway with a prybar
Anyone with a die grinder could cut the lock even faster.
А нафига все эти механизмы с замками, если они все на саморезы прикручены? 🤣
Спорные очень механизмы. Если закроется, а ты остался с другой стороны, тебе никто не поможет...
Вот и меня мучает этот вопрос. При наличии шуруповерта замок как брелок.
Чтоб заепаться, пока их изготавливаешь. , ;))))
@@sawel6073 😂😂😂👍
Great production. But it has one big flaw - the lock can be opened by unscrewing the cross screws. The lock must be made in such a way that the screw heads are hidden when locked.
Or use rivets, secures screws with welding or weld the screws to nuts on the backside: screw still spins, but nut wont come of. on some handles easy to cover the screws by moving the screw holes or enlarging the metal pieces to cover them.
That was the first thing I thought.
رغم الإعاقه اقذم ديكورات جميلة لكن للأسف لا أحد يشجعني💔💔💔💔
Let’s go brandon 🍦🍦🍦👍🏻
Только вот ширина шины должна быть больше,чтобы закрывать саморезы. А иначе замок бесполезен.
Самый лучший видеоматериал.
Класс. Спасибо.
I love "developing world" inventors! Welder, bender, angle grinder, drill & ingenuity. 👍👍
Bom dia a todos vcs aí abraços forte
Bom Dia , otimo Video 👏
saudações da Áustria 👋
Love that video,my dad told me locks are only to keep honest folk honest ,a thief will always find a way in
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
Amazing
Lowes and Home Depot don't compare to this man!!!! Wooooo WEEEEE!😉
ЗА ТО ЧТО СВАРОЧНЫЙ СВЕТ УБРАЛ, ЛАЙК!
Vietnammmmmmmm ❤❤❤🇻🇳🇻🇳🇻🇳
сварочные работы в труселях это верх мастерства🤣
The first one. How do you open it from the other side? It's a nice idea but it seems you can get locked in very easily.
Yeah i thought the same, great until you pull it behind you without thinking.DOH
Use for the gate man.
Very practical ideas, but one huge problem.............your mounting screws are exposed. They can be removed and entry is possible. Redesign your mountings and your designs are thief-proof.
Un genio !!! ojo las patas al soldar en ojotas....jaja. Abrazo.
hope the wind doesn't blow the door shut with you inside.😂😂😂
lol
絶対にストッパーを使ってください。そして絶対に犬を近くにこなせない。😂
Best on animal gates, with access from both sides for human
💔😂😂😂😂😂
فعلاً خطيره جدا حتى الموت !!!
🤣🤣
Cool latches but no real security. As built, none of them provided any level of security that could not easily be defeated. Excellent DIY for a low security need
I remember a few of these latches on farms of my youth and to see them and others come to life here is incredibly satisfying. I think i'll use a couple in an upcoming gate project or two.
Muito bom esse video criativas em ação pequenas ideias para o nosso dia a dia top 🤜🤛🙌👍😁
ruclips.net/video/umqq2heHNpM/видео.html🤝🤝🤝🤝
for this design Hung Che reinvents the wheel (providing you have access to fabricating equipment costing a lot more than a latch of better quality would cost to buy)
Мастер Класс! Очень полезное видео!
Great job 👍🏻 👏 👍🏻
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
I love the safety flip-flops!
He should update to Crocs, That way only half the welding spatter would burn his feet.
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
I love hickidoos and jiggers. This was a pleasure to watch again. Thank you for sharing.
Из разряда "мы не ищем лёгких путей")))
Nice flip flops and shorts playing with a welder.👍
Просто забавные игрушки.. )
В последней модели подходи с шуруповертом,и отворачивай саморезы-они пластиной не закрыты,и замок снимать не надо -снимется вместе с устройством после отворачивания саморезов.
Simple yet incredible!
Except all it takes is a screw driver to gain access
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
good developments, but most can be opened with a simple screwdriver
Классная идея , Оригинально.
Es ist wirklich sehr hilfreich wenn man sich dieses Hobby der Metallverarbeitung zulegt💡Ich werde im Zweifelsfall ganz sicher darauf zurückkommen und mir etwas dazu einfallen lassen👍
😀
Die Schlösser sind nutzlos, da die Schrauben der Verriegelungen zugänglich sind und von jedem, der dies möchte, mit einem Schraubendreher abgeschraubt werden können. Meine Kommentare wurden von diesen Leuten gelöscht. DIE WAHRHEIT TUT WEH!!!!!!!!
Está muy bueno y fácil de fabricar saludos y siga adelante
xafiduka allaah sheekh mustafe wa jazaka allaah kheyr jazaa'
One should avoid self locking models on deep freezers because he could lock himself in. 😉
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
@@blondegerman4461 my comments on some other chanel too! Funny how they can't admit a minor mistake. 🙄
het laatste slot is zo open te maken met een schroevenrdraaier. 3 boutjes zijn zo los. dan had je beter het bewegende deel wat breeder kunnen maken zodat de schroeven afgedekt zijn bij het sluiten. gratis tip. ;^)
Nice....gbu
The second latch and/or variants were to be seen on nearly every gate in the fence between front and back yards of houses in my whole suburb in NZ back in the Fifties. I should know, as I had to go around monthly collecting money for the newspapers I delivered on my bicycle.
Pretty much all of these have been in use for well over 100 years.
The first one is a version of one that I first saw and photographed on a fence gate in the historic town of Rugby, Tennessee. That one was probably made by a local blacksmith and the ring was made from round rod.
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
@@blondegerman4461 use carriage bolts instead, engineering hurts
@@blondegerman4461 They were fastened with screws as they were demonstrations only.
Am i missing something here but with the round first one you open the gate via the latch and go through but when you come back you’ve now found your locked out!
Respect from India....
👍👍👍👍👍👍👍
КЫРГЫЗСТАН
Great job thanks for sharing
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
Самый топ это два гвоздика. Один из них крючок на двери, а второй петля на коробке
It would be best to weld the bolts which are used to attach the latch, as if You have the screws and bolts visible, it's too easy to just remove them and open the door.
Идеи хорошие, даже очень!!!
Но посмотрите на механизмы, которые должны закрываться замком. Там просто снаружи саморезы вкручены)))) Супер защита ))) ахахахах
The first 2 latches have been used in the UK for over 50 years!
yes, its easier to buy them and who has a welder.
Fo years is a drop in the bucket just made huh.
Даже в такой, уже в банальной вещице как дверная защёлка, которой казалось точно никого не удивишь, находятся люди, которые ломают этот стереотип.!
very smart to use holding elements like bolts etc outside and use a lock ))) no need to have a picklock , need just a screwdriver to unscrew bolts to get inside... better to make longer "stands" to hold the construction with bolts from inside and outside part of construction to lock the door
Всё красиво на двух саморезах
Отвёртка под крест решит эту преграду ! С шурупами нужно решить проблему. Ну а так идеи хорошие.
Always cracks me up seeing these beefy locks and wimpy mounting hardware
все идеи крутые,но есть одно НО,там все на шурупах,а шурупы можно выкрутить,так что в этих задумках,лучше применить мебельные болты без граней и гайки.А так крутые идеи,класс!!!
Good quality work and great ideas.
Welding and grinding in flip flops. Ha, ok.
Hey my friend, all these latches are screwed on from outside, so they can be easily be removed from outside by everybody. I would be happy to see locks and latches which are assembled from the inside and just has the "authorized user access" from outside. You showed that your skills and creativity are on a very high level, but the general concept needs to be improved from my opinion.
I didn't understand, for example, the first circle buckle, how do I push the door open outside and come in?
Снято красиво, только вот вся эта фигня - тюремная, для запирания кого-то. В смысле с другой стороны не открыть, разве что выбить, а с этой выверни шурупчики - и пожалуйста...
I love it I enjoy watching them make interesting stuff and watching them welding away on stuff and in the video there wearing sandals love it !!!!!!!!!!!
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
Зашёл в помещение на секундочку, дверь за тобой закрылась и ВСЁ!
Nice varities..But I only need a Phillips acrewdriver to lift the locks .🧐
Actual dimensions and placement will be crucial to the first one working.
Thanks for uploading, sir.
So cleaver !!!
Todo muy lindo. Buenas ideas..
Wow very good work
Creative ideas
Big like for this video
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
Impressive work indeed!.. Congratulations!.. THANK YOU
Я могу фигурной отвёрткой любой твой замок открыть ! У вас ум есть а разума нету !
замки от честных людей )
Hi my friend, I enjoyed it, great as always, thanks for sharing👍👌👏💙
les systèmes de fermetures sont bien, par contre ne mettez pas des vis autoforeuses où à bois car vous prenez un tournevis cruxiforme et vous ouvrez :)^^
Interesting and beautiful ideas, thanks. ;) But don't forget to have your phone with you when you enter a room equipped with the first type of latch.
The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!
@@blondegerman4461 They could use bolts with lock nuts on the inside?
@@robpotter1355 Perfect Rob!
Всё это можно открыть с помощью отвертки😁
9:53 Nice design. Easily to make safer by having all screws being behind the rotating elecent.
I wouldnt say inventor or designer, per se. Ive seen all of these before is some form.
That being said the use of materials and production methods I would certainly call innovative!
Открыл зашёл , захлопнулась дверь а как выйти??? 😂
Backdoor my friend, backdoor 😂
Really smart - you only need a screwdriver to get in 🤣🤣🤣
Cool, wenn man so schöne Schlößer baut dann sollte man aber noch nenn Schraubenzieher daneben hängen damit der Dieb die Schrauben gleich heraus drehen kann.
Cool🤕