Glat to see its an easy thing to do , getting an 91 this weekend that's been sitting ofr 8 years do to a bad starter , ready to get it home and start wrenching
Thanks I'd have had to jump under to try to find where mine was and disconnect it but it helps to see where from top and now don't have to get down in mud to replace.
Hi , where did you find starter for $40.00 ?? Please send link ..my 1993 Ford Ranger starter just went bad and I need to order another . Thanks ..Great Video
I Also Thought He Said He Bought It Off Of Amazon For $40.00 And That Thing Looks Brand Ass New, Not Just A Cheap Ass "Remanufactured" Unit... So, Yes! Please! Give Us The Linky! If You Have One...
I think u made a pretty good video,and seems as if your skillset is about the same as mine,*( I dont know much about cars either,lol) .but after watching your videi,i think I can do this. Thnx.:-) Btw,around 6 minutes or so into the video, what is that " growling sound"? N it's like u purposely stopped everything so we could hear it for like 30 seconds or so..so...what was that.?
all the 3.0L V6s are basically the same from this Era - Aerostars and Rangers... - it's more about the engine and drive train - the easiest being the 3.0L and RWD only... the 4.0L is not the same (harder) as is the AWD or the 4x4 with the front shaft in the way, so you have to remove it, not a huge deal, but - BTW Yes, that wheel with the teeth is called the flywheel - the starter turns that to start the engine - right behind that would be your clutch if you had a Manual or a torque converter if you have an automatic tranny.
So here's my problem. I have a 1993 Ford Ranger and I am able to access the 2 bottom bolts underneath, the top bolt is the one I cannot access, the bolt on top of the starter. My question is twofold. 1) you're working on a 1991, it should be approximately the same right? And 2) do I need to remove the oil filter to access the 3rd top bolt on the starter? If you don't know I still appreciate you taking the time to read my question.
LordRain1031 To be honest, I don’t know if the 91 and 93 are the same, but it doesn’t sound like it because I didn’t have any issue getting to any of the bolts for the starter removal.
@@WHIJ2012 yeah I have a 6 cylinder 3.0 liter engine and it looks as though the top bolt is literally right behind the oil filter. So the way it's looking I may have to remove the oil filter to replace my starter. At any rate thank you for taking the time to reply.
DB Electrical SFD0003 New Starter For 2.3L Ford Ranger 91 92 93 94 95 96 97, 2.5L 98... www.amazon.com/dp/B004CSZXTE/ref=cm_sw_r_sms_c_api_aFCABb048C414
![1990 Ford Ranger | [4K] | REVIEW SERIES | "THATS A FORD FREAKING RANGER"](/img/1.gif)
The correct term is the thingy, the starter spins the thingy😊 that’s professional lingo I learned that one from my professor. Great video.👍🏼
Replaced the starter in my 91 Ford Ranger today. Was nice to have this little refresher video Took me less than an hour. Thanks
That part you was looking at was the flywheel nice
Thanks for the help! I have to do this today….
Good luck. It is pretty easy if there is not too much rust.
Glat to see its an easy thing to do , getting an 91 this weekend that's been sitting ofr 8 years do to a bad starter , ready to get it home and start wrenching
This will be useful for me thanks for posting it. Leaving another job is easy he also help me diagnose it
Thanks I'd have had to jump under to try to find where mine was and disconnect it but it helps to see where from top and now don't have to get down in mud to replace.
Thank you for posting this!
Dude nice video man 👍🏻
Hi , where did you find starter for $40.00 ?? Please send link ..my 1993 Ford Ranger starter just went bad and I need to order another . Thanks ..Great Video
I paid 120+ for the starter on my 99 ranger
I Also Thought He Said He Bought It Off Of Amazon For $40.00 And That Thing Looks Brand Ass New, Not Just A Cheap Ass "Remanufactured" Unit... So, Yes! Please! Give Us The Linky! If You Have One...
Where did the lead connect?
I think u made a pretty good video,and seems as if your skillset is about the same as mine,*( I dont know much about cars either,lol) .but after watching your videi,i think I can do this.
Thnx.:-)
Btw,around 6 minutes or so into the video, what is that " growling sound"? N it's like u purposely stopped everything so we could hear it for like 30 seconds or so..so...what was that.?
I believe that is when he turned into the Devil.
What was the issue with your tach? I noted it didn't work when you started it.
all the 3.0L V6s are basically the same from this Era - Aerostars and Rangers... - it's more about the engine and drive train - the easiest being the 3.0L and RWD only... the 4.0L is not the same (harder) as is the AWD or the 4x4 with the front shaft in the way, so you have to remove it, not a huge deal, but - BTW Yes, that wheel with the teeth is called the flywheel - the starter turns that to start the engine - right behind that would be your clutch if you had a Manual or a torque converter if you have an automatic tranny.
At 5:54 the sound went out? It's on now..
Is the 1990 xlt ranger starter located in the same place as yours?
Sorry, not sure.
At 5:50 do you have a pet Lion that came around?
lol! I don’t know what happened there.
So here's my problem. I have a 1993 Ford Ranger and I am able to access the 2 bottom bolts underneath, the top bolt is the one I cannot access, the bolt on top of the starter. My question is twofold. 1) you're working on a 1991, it should be approximately the same right? And 2) do I need to remove the oil filter to access the 3rd top bolt on the starter? If you don't know I still appreciate you taking the time to read my question.
LordRain1031
To be honest, I don’t know if the 91 and 93 are the same, but it doesn’t sound like it because I didn’t have any issue getting to any of the bolts for the starter removal.
@@WHIJ2012 yeah I have a 6 cylinder 3.0 liter engine and it looks as though the top bolt is literally right behind the oil filter. So the way it's looking I may have to remove the oil filter to replace my starter. At any rate thank you for taking the time to reply.
@@LordRain1031 did you end up removing the oil filter to get access to the bolt?
@@Drkmoon13 no I didn't, thanks😉. The missed the 3rd bolt but found it. Was easier putting it back in lol
Lordrain: what?????
Where is the starter located,i cant find mine.
On the truck he’s working on it’s under the truck next to the oil pan on the passenger side next to where the transmission connects to the motor
oh, It'll start! hook up a 13 HP briggs and straton and send her all the way! she'll turn over.
Huh?
13mm is the size ?
Its called the solenoid...
Don't clean off that way u can line bk up the same way
Flywheel?
I have not replaced that yet and now the clutch is slipping. I think it is time to get rid of the Ranger. 😢
Flywheel turns the motor
Connects too flywheel...
DB Electrical SFD0003 New Starter For 2.3L Ford Ranger 91 92 93 94 95 96 97, 2.5L 98... www.amazon.com/dp/B004CSZXTE/ref=cm_sw_r_sms_c_api_aFCABb048C414