No sealant between panels, no flashings, no bottom mounting bracket, exposed edges and corners. You must live in a location where there is no rain or bugs! Why use insulated panels if you do not care about properly insulating?
I hope you live in an area where earth quake activity is no issue; there is no X bracing on either of the walls or the ceiling. Rectangular bracing is not the way to go. All the best !
Amazing build. could you do a price break down or an estimated. I’d love to build my own but I was thinking about going with a red iron building kit but prices have gone up like crazy
A panel construction is maybe the cheapest version.... I understand that this panel construction is 70 m2. So the avarage cost for this is 10.000€. 1) Concrete+irons+aluminiums~=4.000€ 2) panels~=5.500€ By the way, Panels cost 25-30€ per m2 in avarage europe. At this construction needed probably 120 m2 of side panels and 60 m2 of roof panels!
Absolute Anfänger. Die Bodenplatte ist wohl immer nur so groß wie die Stahlrahmenkonstruktion. Wandelemente sollten ein Stück weit überstehen. Wie beim ersten mal!!! 🙈🙈🙈🙈
Hello friend ,you can take a look at my type of board ,it has a beautiful decorative effect and also provides insulation ,there are many styles that can be customized
@@ThisIsSteyn These are panels from Panelsell. I don't think you need any sealant between them. Can use tape and flashing to seal between the ceiling and the walls. Problem that I see is the thermal bridge from the ceiling panel and out, and the water leaks under the wall panels since the slab will not drain the rain.
You missed out so many finishing touches!
No material to Cover the corners!
And how about the connection on the ground is it keeping the water out!?
Видно,что профессионалы работают-сварка без маски !А с маской каждый сделает!
I am looking forward to seeing the wonderful construction.
No sealant between panels, no flashings, no bottom mounting bracket, exposed edges and corners. You must live in a location where there is no rain or bugs! Why use insulated panels if you do not care about properly insulating?
What could have been done about the exposed edges on the roof panel?!?
@@vaibhavreddy4128 Flashing and sealant!
spray foam
This is Turkey
Thanks you
Good job...
What was the total cost of panels
Nice, how much usd/ m2 house ( foundation + frame + panel eps) same video?
The water will get inside, never leave the concrete more out from the exterior of the sdw panel
Not if it is sloped correctly.
Who knows why idiots always want to show their ignorance
@@bakervinci163 Clearly is not the case.
I always recommend leaving the panels “stepped down” at least a foot below finished floor for this very reason.
So nice. Is this available at delhi n how much cost
I hope you live in an area where earth quake activity is no issue; there is no X bracing on either of the walls or the ceiling. Rectangular bracing is not the way to go. All the best !
An excellent video showing how not to construct a building using coolroom panels.
Removing the down vote button didn't help
please elaborate
Looked easy but I dont feel its quiet secure against wind, water and cold weather especially snow
what the szie of the workshop ? is it a 6 meter by 10 meter ? and what kinda square tube you using ? 3x3 ? 4x4 ? 5x5 ?
100x100
I am still dreaming of having a workshop 😁
Exelente, por dentro como le arian para parecer más una casa que un galpón??. Que no se vean los metales quiero decir
Hi. What is the size of the hall?
Can you please tell me the thickness and size of the main beams?
Each panel is 1m.
good job
This kind of panels are available in the Philippines?
Hello, what is the smallest size of a metal profile that would not bend in 4 meter length (for a flat shed construction 4 by 4 meters)
60x60 kutu profil işini görecektir, kalınlığı 3mm olsun
How much did it cost
Can these panales be used for noise reduction in fabrication workshops??
They are not the greatest sound isolators, but they have some noise reduction features
Yes they can. You should order panels with Rockwool then.
Best video
Amazing build. could you do a price break down or an estimated. I’d love to build my own but I was thinking about going with a red iron building kit but prices have gone up like crazy
A panel construction is maybe the cheapest version.... I understand that this panel construction is 70 m2. So the avarage cost for this is 10.000€. 1) Concrete+irons+aluminiums~=4.000€
2) panels~=5.500€
By the way, Panels cost 25-30€ per m2 in avarage europe.
At this construction needed probably 120 m2 of side panels and 60 m2 of roof panels!
I am interested
ruclips.net/video/fxUZuX35c0c/видео.html
Sir humr baut bada room hai usne deewar banani hai kitna kharch aaega
I am interested
Как прикрепляется панель к каркасу?
Судя по всему это секрет🤨
and price?
Ye Jo apne banayi hai
Panel price
In my opinion, the iron structure should be visible from the outside.
What do you call these panels in the Us?
sandwich panels
Insulated Metal Panels
great
Verygood💪🏿💪🏿💪🏿
А где гидроизоляция на фундаменте?
Dond consigo ese material que ponen como muero o paneles como se llama
Y como se fijan?
E fica muito bom esse recurso👌 fiz com a de 30mm no RJ não usei nem manta 🇧🇷 Brasil 🇧🇷
What is the sponge inside this panel? Is it EPS, XPS or polyurethane?
Hello
You need to finish the roof polyurethane foam end.
FORNT OF THE BUILDING ON THE TOP
Price full furnished house per sqft feet
Kata samparka garne ho?
👍👍👍👍👍👍
How much cost
Where can I buy this?
see panelsell
total? approximate?
Absolute Anfänger. Die Bodenplatte ist wohl immer nur so groß wie die Stahlrahmenkonstruktion. Wandelemente sollten ein Stück weit überstehen. Wie beim ersten mal!!! 🙈🙈🙈🙈
Dream
genial, pero no podría pagar por esos páneles.
Hello friend ,you can take a look at my type of board ,it has a beautiful decorative effect and also provides insulation ,there are many styles that can be customized
Есть проект добрые люди?
In my opinon, from three workers, only one can get a graduate fee
Ci sono degli errori nel montaggio.....purtroppo
🤔
Что нам стоит дом построить
Tapai ko pn no.dinu na.
Водо слив где
Показалибы
Tena tsara be
it is not related to india show indian technology
This isn’t really a proper way to do this
True dat, but this is low cost version.
@@elbuggo why use sandwich panels if u dont seal them, this is a big waste of money
@@ThisIsSteyn These are panels from Panelsell. I don't think you need any sealant between them. Can use tape and flashing to seal between the ceiling and the walls.
Problem that I see is the thermal bridge from the ceiling panel and out, and the water leaks under the wall panels since the slab will not drain the rain.
Выглядит рукожопно
😂
Bahut Ganda hai
Hahaha. Zu blöd die Bodenplatte genau zu betonieren 😅😅