HOW TO ADJUST A CHAINSAW CARBURETOR WITH NO SPECIAL SPLINE TOOL
HTML-код
- Опубликовано: 7 сен 2024
- IN THIS VIDEO I WILL SHOW YOU HOW TO ADJUST A CHAINSAW CARBURETOR WITH NO SPECIAL SPLINE TOOL. AND IT CAN BE ADJUSTED ANYTIME AFTER THIS IS DONE. THE IDLE SCREW ON THIS SAW IS BETWEEN THE LOW AND HIGH ADJUSTMENT. Donate and Help A Brotha Out: help me fight my canaer gofund.me/1581...
~-~~-~~~-~~-~
Please watch: "How to remove super glue from fingers, or skin, with things at home."
• How to remove super gl...
~-~~-~~~-~~-~
I love how some people come up with the simplest solutions that i can never figure out. Thank you.
5:56 This is probably the best explanation ever! Thanks for the help, got my pp180 running smooth again. I like your tip with the foam can nozzles. I took one and superglued it to a long junk hex screwdriver that came from some long-lost Walmart furniture set. Now I have a tool I can use to adjust carbs anytime.
Thanks Bob; you’re a genius. I was able to adjust my carb
with an electrical connector instead of buying a tool and waiting weeks for it
to arrive in the mail. Idles like new now.
thanks Gary, glad it helped you. bob
Bob, you saved the day! The "great stuff" tube pressed on perfectly. I used a marker to mark the "top" of the tube near the carburetor for reference. My Husqvarna 445 started fine, but when I pulled throttle lever it would bog down and begin to die unless I let go of the throttle. It wouldn't run at operating speed, only about 1/3 speed. Here's what fixed the problem. My Low took about 1/4 turn to the left (open) to be more responsive to throttle. The High took about 1/4 turn to the left (open) to remove the "stalling" issue and now it runs perfectly!! Back in action, thanks to you... You're the man today! Happy New Year!!
Idle speed screw is below those adj screws. There's a hole in the recoil housing for that.
What he said! The Idle adjustment screw is clearly visible and there is an opening in the green cover to adjust it without removing anything. That is the adjustment used to set idle just below the speed that chain starts to move.
Came to RUclips to find the bog solution and was able to fix three saws with blue electrical connectors and get back to work. Save my hide. You the man.
Thanks Bob for the awesome tip. My chain saw been sitting for 4 years, now its running perfectly. 👍👍👍
YOU THE MAN!I sat for 2 days staring at needle nose pliers and a glue gun to figure a simple hack like this...thanks.
Whoever insisted manufactures use this style of tool is a tool themselve. They should be put in jail for 5 consecutive life sentencs for ripping off the consumer.
Best youtube video about this I used a plastic wire connector and flathead and fixed my bog issue.
Simply brilliant. Thank you Bob; as I need to adjust a splined h screw today. Thank you for a job well done!! It is people like you that make you tube learning great.
I love the commentary, you sound like the kinda guy I could have a few beers with
thanks
I have a Poulan Pro 42cc saw which is new, and I just got it to start, but it will only run for about 15 to 30 seconds on average before it quits. I figured that the adjustments for the carburetor was incorrect. I don't have the special wrenches needed to adjust the hi, and lo settings, and will look for some at the local saw shop tomorrow. I thank you for providing us with this information and I will see if my older Poulan saw is in need of adjustment also, but it have given me great service since 2000 when I got it new.
i have videos on how to adjust a carburetor with things you have at home.
I have to check those videos out since I will be doing adjustments on all my saws, and trimmers at one time.
Shops will probably not sell you those as the epa doesn't want you to adjust them. You can order them on e Bay from China for less than 10 bucks or do what this guy did.
Brilliant idea Bob. Will remember this. You the man! 👍😊
Dude fricking smart...probly the best hint right when im tearing apart my life looking for that stupid tool...thanks
Great video 👍👍! You just saved a chainsaws life. I was just about to pull out the 20lb sledg hammer to make the adjustment. No other tools was working.
hey people buy the screwdriver 21 teeth spine its $2.50 free shipping from E-bay.
Thanks a bunch BOB.. you saved me a big headache with your video. Brilliant. Thanks.
Thanks a lot, man! A red butt connector and a little finesse got me the 1/4 - 1/2 turn I needed on the high idle and I'm up and running.
Sir you are a Genius. I thank you so much as I didn't have that carb tool. This worked Great. Thank you again !!!
The idle screw is under your high low adjustment on that model you can see it right by the choke
great thanks.
thanks
outdoorstech o
Yeah, I am going to take advice from this guy who cannot even see the idle speed screw in front of him. And has to write L and H, when it is embossed on the cover he took off.
Great a clever idea!I didnt want to pay my main dealer,And i like how you have got around the problem!
thank you sir
Good job !! Tomorrow I will try to wedge a small screwdriver in an electrical connector and do the adjustment without removing the cover.
thanks great idea by the way your idle adjustment is right under the Low/high adjustments on this chainsaw
thank you again
Cool tip, thanks! I have a spent can of that foam, so I won't throw away the tube!
I’m taking the time to tell you I appreciate the tip. My sh!t as* poulan wouldn’t idle didn’t have the tool and I used your tip and it worked thanks man !!
Thanks! Great Idea. I think I have one of those Great Stuff cans. I was going to just order the stupid tool. But, that's what they want you to do. That is why they now make those things with special tools instead of just a flat-head or Phillips head. Plus, I need to do some cutting this week and my Poulan is idling too fast. I can't wait a week or two for tool to get here. Thanks again. I'll try this.
i have another video on this, of other things you can use that works too. look it up. thanks for watching.
The EPA doesn't want the end user to adjust the carb,(air quality regulations).as well as putting limiters on as too....
I've used the same plastic tube cut to 4"" and magic marked at the end for rotation referencing.
Thanks for the video. I was trying to figure out something to use without searching for that special tool. Where I live there are few stores close. Like you I have a lot of stuff that I keep because I know it will be useful someday.
This guy is the real deal lol love the comments!
thank you.
What an awesome solution!!! Thank you for the video, and for the advice on how to move the screws as well.
glad to help.
Great video. I tried this and it worked and got me through the day. Also, I ended up buying the spline tool on Amazon for $6 with free shipping for next time.
Your video was a little long Bob, but you gave a great tip on how to adjust the set screws. I didn't have either the tube or a butt splice, but I was able to use the insulated end of an alligator clip. Thanks for the idea.
Btw, your carburetor adjustment screw looks like it would be through that little hole that is between where you have it marked low and high
Those screws come in many different configurations besides splined,a whole set of drivers that will cover most 2 cycle carb high speed low speed adjustment screws,are available on amazon for a few bucks.Do your self a favor and buy them....
Thanks for the idea can’t believe I didn’t think of these lol saved my day
The idle adjustment is that hole in between your L-H FYI
Awesome man thank you so much for this but I think you need to tighten your chain a little bit it looks pretty loose
I appreciate the ideas. It helped out and saved me $$$ THANK U!
Hey, the idle speed screw is between and below the two mixture screws.
I made one out of the small end of a bic pen.
Your idle speed screw is the hole in the lower case just below the mixture screws. Thanks for you help
thank you.
Not all hero’s wear capes
Hell yeah great video I'm in that problem right now thanks for the info
A piece of 1/4 " copper tube works also.
Use a red butt connector crimp a piece of copper wire or small screw in it. Drop of super glue on the other end slide it on and you’re good to go.
Awesome thanks for the indepth gonna tune my saw this week
The idle speed screw is between the H/ L mixture screws. Honestly.... you didn't know that?
Hint; I use to use icemaker tubing, just warm it up so it'll stretch, then slip it on and let it cool, better than the $15 tool that you can only get if you've got a license
vary cool, thanks
Great vid Bob. Genius idea.
The bottom tube of a bic soft grip pen works too thanks for the idea
Bob's Lawn Service & Plowing
The idle screw is just below the H-L adjustment screws.
Well shit. Wish I saw this 2 weeks ago. Before waiting 2 weeks for my screwdriver to show up. Great video!!
I got a chainsaw like that it runs but when you let off of the throttle it bogs out what causes that
I'm always doing shit too.
Seems the cheaper, crappier things get made,, the longer that shit list gets
I like it. Thanks
Your idle screw is right in between the “L” and “H” letters.
It does have an idle. Its the hole between the L & H
or just buy the adjustment tools off of amazon or ebay for like 10 bucks.
the idle tool costs 5 bucks and you dont need to take the cover off
Great tip, thanks for posting this video, great time saver.........
thank you
After rebuilding carbureter on a poulan pro pp4218a it will start but won't stay running
Hey Amazon sells a set of adjustment drivers for cheap!
Great idea! Thanks for posting.
made a new video how to adjust a carb new or from
ruclips.net/video/HquG1U1_uLk/видео.html
Wish me luck!! 👍🏼
Legit my ryobi idles but Boggs down but then I'll start it up and it idles high and starts running
Great video my friend. Since you do not charge either will I here is another secret, Shrink tubing , Heat and a screw on the other end (cut screw to fit. ) put tubing on suggest heating screw end first before on one end leave long . THEN put on the other end keep short as possible heat adjust remove if necessary. If possible I leave on....
very cool, thanks
if my poulan p3818av is having issues with not getting enough gas is it the low screw I have to hire? plus it has a T idle screw as well.
Great information!!
your idle screw is one of those 2 holes right by your other 2 screws
The idle screw would have to bite you I guess before you will find it! Look at the cover L low H high i idle
AWESOME.... thank you brother
Great hack thank you for this. I've been looking for the stupid tool at several locations... pain in the arse!!
I'll use your trick tomorrow and get my saw back o the game!!!
Thumbs up!!
Yeah, I have the electric connectors, good idea!
Dremel thin tiny cut wheel it just became a flat screw driver
Hey Bob, got a poulon 14" wildthing. Won't stay running, rebuilt carb, changed filte,r, lines plug would run in choked idel set with choke itself open. Rebuilt again and thorough cleaned. Still couldn't get the damm thing to stay running except in the stepup choke setting no matter adjustment. High or low.
So,,, ordered a brand new carb,,, same sad thing. What am I looking for?
Thing looks just like mine cept it has purple plastic and green
have you changed the gas filter in the tank? check the compression. check to see if the exhaust or muffler is clogged. new plug !!!!!!!!!!!!
Hey , useful info , thanks !
awesome man, thank you
you forgot to adjust the carb. also the idle screw is on the left side of the saw.
75 dislikes are the special tool makers
awesome thanks for the tip
Salut! nice video!bravooooo!!!.
You sound like Jesse Ventura!
That was cool as sh!t I will definitely use that trick 🤔 I think the idle screw is under the inside end of that blue lever on your saw.
thanks
thankyou!!!
good job
“I got a whole bunch of these cuz I’m always doing shit” 🤣
cool, works on a lot of 2 cycle stuff
Bob fire that puppy up and adjust it, hear it is a lot better.
What's that screw for at the end of the hole between your "L" and "H"?
that is the idle screw, to turn the idle up and down.
a flat screw would be normal
S**T and special noise effect right on Guy tell it like it is! LOL
thanks man.
Thanks
your well come.
Well I’ll be damned 🤠👍
What kind of bobber is that at 0:25 ?
honda cb 500
Idles too jigh
Mines dies when I go cut a tree
9 bucks for 21 spline off Amazon
always I'm doing shit :) Lol
Fuck a Poulan! Buy a Stihl or Echo!!!