Haha glad you enjoy them! Of course I could edit to make it look like everything went flawlessly, but that's not reality and then not as helpful. I like to show the good and the bad of the process and you hit the nail on the head as to why.
Idk why this doesn’t have more views. It definitely seems like the best method I’ve seen so far. The only other thing I’d try is having the rag be damp or wet before hand. Or perhaps letting the art sit in water till it’s pretty soaked. And dry it with the iron. Like push the wrinkles out with the iron as your drying it.
Hey man I appreciate it! This was a first time learn-as-I-go process to be sure. In hindsight I really wish I would have had a nice flat sheet of glass to do the ironing on and push the wrinkles out. As you can see, doing this same thing on a finished wooden table had some.. downsides. Water submersion may have worked out well as opposed to spraying, but I was worried about blistering between the ink and the paper.
Thanks! Yeah I'm not sure I'd be brave enough to attempt this on something like Chibi Robo... I probably would though because the water damage just looks so bad. Luckily I don't have any water damage on my more rare games.
Thanks for the kind words! A manual could be a little more tricky since it is multiple pages vs a single page like this insert here. If you get the pages highly humidified (or wet) and press them together there is some risk (maybe high risk) that they'll stick together causing permanent damage. I'd recommend practicing on a low value manual--which is what I'll do if/when I come across one. Who knows, could be a new video one day!
@@FantasticQuack your right maybe if I put something on btw each page? I don't know good thing I was going to do this Friday and not yesterday or today before this haha. Thanks for the info and feedback your amazing.
Very true but you need some expensive equipment for that.. I truly believe doing this with a sheet of glass instead of a finished table would have worked and caused no ink damage, but I have yet to try it. Cheers
Recently bought a game with a water damaged art work and want to try repairing it. Do you recommend I put the cardboard first like you did afterwards so I don't lose paint? I really don't want to lose paint just want to flatten it out.
Hey! Try to get your hands on a flat piece of glass (like from an old copier or even a glass-top coffee table). That will be a prime surface compared to the wooden table I used. Good luck!
I’m assuming this case was from a cheaper, better condition game right? It actually didn’t fit into the case perfectly because GameCube cases come in a variety of sizes and some inserts will fit into certain cases where as some won’t. The size of them has something to do with the number and letter printed on the side and a gauge on the top right corner of the front of it
I'm not certain since this is the case it came in from when I bought it used. I just assumed the water damage swelled and expanded the art a bit; at the end of it the fit was pretty good though after enough drying/flattening time. I have swapped a lot of gamecube cover art/cases in the past though and I've never run into one not fitting into a certain case like what happened here.
The iron is unnecessary, all I do is spray some water on the inside(do not drench) of the insert. Dab it dry with paper towel, then put a bunch of books on the insert and leave for about 10 minutes, check and leave for longer if required. This will remove those ripples with ease.
That can be tricky. you could try a hair dryer to see if heat alone will release it without damage. Otherwise you might need to also wet it a bit, maybe by sliding in a damp paper towel or something like that.
The general idea will work, but there are other methods to humidify/press beyond what was shown here, so I'd just recommend doing some research and practicing on stuff you don't care about.
I bought Gotham Knights brand new and sealed and mine was like this.. I hate having a cracked case or scratched disc, but this is a whole new level of frustration lmao
I don't use an iron, I spray water onto the back of the cover, sandwich the cover between two sheets of paper and put a heavy book on top, wait a day and the wrinkles are gone from the artwork.
I used to have a big piece of glass (salvaged out of a broken scanner) that I was looking everywhere for before resorting to this. As you can tell I didn't find it....
If it's a good price I would for sure! It's not too much effort to do this and bring it back to near perfect condition. Just don't make that one mistake I did!
You're a legend, your videos are a goldmine! I appreciate how you stumble your way through because at least it shows us what to avoid at times lol
Haha glad you enjoy them! Of course I could edit to make it look like everything went flawlessly, but that's not reality and then not as helpful. I like to show the good and the bad of the process and you hit the nail on the head as to why.
@@FantasticQuack keep up the great videos! I'm learning lots of different ways to do things I thought I already knew, and also lots of new stuff too!
Idk why this doesn’t have more views. It definitely seems like the best method I’ve seen so far. The only other thing I’d try is having the rag be damp or wet before hand. Or perhaps letting the art sit in water till it’s pretty soaked. And dry it with the iron. Like push the wrinkles out with the iron as your drying it.
Hey man I appreciate it! This was a first time learn-as-I-go process to be sure. In hindsight I really wish I would have had a nice flat sheet of glass to do the ironing on and push the wrinkles out. As you can see, doing this same thing on a finished wooden table had some.. downsides. Water submersion may have worked out well as opposed to spraying, but I was worried about blistering between the ink and the paper.
Interesting results. I'd be nervous to do this as it's my rarer games that have slightly warped inlays.
Love the selection of books.
Thanks! Yeah I'm not sure I'd be brave enough to attempt this on something like Chibi Robo... I probably would though because the water damage just looks so bad. Luckily I don't have any water damage on my more rare games.
Underrated video, it looks like might work with books too!
Thanks! I think it would but haven't tried just yet!
I'll be trying this later, thank you so much dude
You're welcome, wishing you the best!
This is sick. Gotta a PS1 manual I need to do maybe this will work as well? It's worth a try. Thanks for the inspiration Great video.
Thanks for the kind words! A manual could be a little more tricky since it is multiple pages vs a single page like this insert here. If you get the pages highly humidified (or wet) and press them together there is some risk (maybe high risk) that they'll stick together causing permanent damage. I'd recommend practicing on a low value manual--which is what I'll do if/when I come across one. Who knows, could be a new video one day!
@@FantasticQuack your right maybe if I put something on btw each page? I don't know good thing I was going to do this Friday and not yesterday or today before this haha. Thanks for the info and feedback your amazing.
Looks like you could use clean & pressing like is done for comic books, to restore this game art flat without damaging the paint.
Very true but you need some expensive equipment for that.. I truly believe doing this with a sheet of glass instead of a finished table would have worked and caused no ink damage, but I have yet to try it. Cheers
Good video, thanks!
Glad you liked it, cheers!
You have the makings of a varsity athlete.
Couldn't agree more, thanks for watching!
Couldn't agree more, thanks for watching!
Gabagool ovaaa heeeeeee 👇🏻👇🏻
When I was in the service, I won the chin-up cup- three weeks in a row.
Recently bought a game with a water damaged art work and want to try repairing it. Do you recommend I put the cardboard first like you did afterwards so I don't lose paint? I really don't want to lose paint just want to flatten it out.
A sheet of glass would be the best surface for this work
I'm going to try that out with Disney Infinity 2.0 Xbox 360 artwork.
Hey! Try to get your hands on a flat piece of glass (like from an old copier or even a glass-top coffee table). That will be a prime surface compared to the wooden table I used. Good luck!
Okay. I don't know if I have a glass coffee table but I'll see what I've got!
I’m assuming this case was from a cheaper, better condition game right? It actually didn’t fit into the case perfectly because GameCube cases come in a variety of sizes and some inserts will fit into certain cases where as some won’t. The size of them has something to do with the number and letter printed on the side and a gauge on the top right corner of the front of it
I'm not certain since this is the case it came in from when I bought it used. I just assumed the water damage swelled and expanded the art a bit; at the end of it the fit was pretty good though after enough drying/flattening time. I have swapped a lot of gamecube cover art/cases in the past though and I've never run into one not fitting into a certain case like what happened here.
The iron is unnecessary, all I do is spray some water on the inside(do not drench) of the insert. Dab it dry with paper towel, then put a bunch of books on the insert and leave for about 10 minutes, check and leave for longer if required. This will remove those ripples with ease.
Next time I run into damaged art like this I'll try that. If it works better I'll make a 2.0 video. Thanks for the comment and suggestion!
Is this something you do regularly ?
this worked for me i also rinsed and repeated it to get it even flatter and it worked well
My artwork is stuck to the plastic in the game case. Is there anyway to get it out without ripping the artwork up?
That can be tricky. you could try a hair dryer to see if heat alone will release it without damage. Otherwise you might need to also wet it a bit, maybe by sliding in a damp paper towel or something like that.
does this also work for art prints? i got a signed print and I got some water drops on it and now I got slight water damage
The general idea will work, but there are other methods to humidify/press beyond what was shown here, so I'd just recommend doing some research and practicing on stuff you don't care about.
@@FantasticQuack thanks really appreciated
I bought Gotham Knights brand new and sealed and mine was like this.. I hate having a cracked case or scratched disc, but this is a whole new level of frustration lmao
Water damage in a brand new game?? Wow that is a shame!
I don't use an iron, I spray water onto the back of the cover, sandwich the cover between two sheets of paper and put a heavy book on top, wait a day and the wrinkles are gone from the artwork.
The wet artwork doesn't get stuck to the paper it's sandwiched between doing that?
@@FantasticQuack no it doesn't.
Lol this is exactly what happened to my GTA
Ain't it a shame?
@@FantasticQuack yes but your video really helped
@@xav_322 glad to hear that!
Lol i did cringe when he started ironing it in the wood table top, its gonna end up all printed on the table i thought to myself
I used to have a big piece of glass (salvaged out of a broken scanner) that I was looking everywhere for before resorting to this. As you can tell I didn't find it....
Guess Ill buy that one game from ebay then
If it's a good price I would for sure! It's not too much effort to do this and bring it back to near perfect condition. Just don't make that one mistake I did!
Just inventing
Not sure I understand the comment but thanks for watching!
Jeffery Dahmer (alternate Pastime)
wut
@@FantasticQuack you act and sound like jeffery dahmer. You should honestly do impression work
@@bonzolo2358 I assume who you're actually referring to is Evan Peters who played him in the series. Thanks for the compliment.
Why don't you scan the cover and print a good copy.
Because then it's no longer authentic/original