AtomRC Swordfish & AR Pro Foggy Formation - DJI WTFOS DVR
HTML-код
- Опубликовано: 13 сен 2024
- 🔥 🔥 🔥 FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇️ ⬇️ ⬇️ (Click 'SHOW MORE'👈🏻 )
On this day we went to our usual flying spot and it was thick fog! So we drove 10mins and found this spot which was completely clear, but with great views of the surrounding patches of low fog! We had a couple of flights, on the first one the Osmo Action 3 wasn’t recording, which was a share as it was slightly better conditions, and my throw of the AR Pro was much better than the one in this video 😅
WTFOS - Well this is a nice treat! Having full OSD back with choice of some cool fonts really enhanced the experience of flying on DJI and its nice to be able to show my OSD in videos again. 😎 Unfortunately I forgot to turn off some of the alarms though! Oops! Sorted for next time.
The Swordfish (tiny.cc/AtomRC-...) is a good plane, ideal size, super quiet and I just love how it came pre built with an FC already installed with iNav! I’ll do a video on this soon.
Enjoy the views of the foggy mountains and lakes... and thanks for watching.
Added Note: All footage from the Swordfish with the OSD is the DVR footage recorded in the goggles (Not on board recording with OSD overlay). The air unit is set to 500mw and 50mbps.
☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► tiny.cc/BuyAdam...
🔵 Follow me on my Facebook page for updates, build logs, chat, random pictures & vid clips that don't make it to RUclips: / adamgdoesfpv
📷 Follow me on Instagram @adamgdoesfpv ► tiny.cc/AdamGon...
Sites I get my awesome FPV goodies from:
✅ Banggood ► tiny.cc/Banggoo...
✅ RMRC ► tiny.cc/RMRC
✅ AtomRC ► tiny.cc/Atom-RC (Use coupon 'AdamGdoesFPV' for $10 off)
✅ Amazon ► tiny.cc/Amazon-FPV
✅ HobbyKing ► tiny.cc/HobbyKing
========AtomRC Swordfish Setup========
In the Air:
-AtomRC Swordfish - RTH Version (includes PNP gear plus FC & GPS) ► tiny.cc/AtomRC-...
(use coupon code 'AdamGdoesFPV' for $10 off on the official AtomRC site using link above)
-Caddx Polar Air Unit ► tiny.cc/CaddxPo...
-TBS Crossfire Nano Rx ► tiny.cc/TBS-Nan...
-4S Lipo ► tiny.cc/3000-4S
On me:
-DJI V2 Goggles ► tiny.cc/DJI-V2-...
-TrueRC Omni Stubbies ► tiny.cc/TrueRC-...
-TrueRC X2Air's ► tiny.cc/DJI-X2-Air
-Sandisk 64gb V30 Micro SD for goggle DVR ► UK Link: tiny.cc/SanDisk... - USA Link: tiny.cc/SanDisk...
-TX16s Transmitter ► tiny.cc/Radioma...
-Crossfire Micro Tx V2 ► tiny.cc/TBS-Cro...
Follow Plane:
-AR Pro PNP ► tiny.cc/AR-Wing...
-DJI Air Unit with original DJI camera ► tiny.cc/DJI-Air...
-TBS Crossfire Nano Rx ► tiny.cc/TBS-Nan...
-DJI Osmo Action 3 ► tiny.cc/OsmoAct...
This is the AtomRC Swordfish - RTH Version (includes PNP gear plus FC & GPS) - tiny.cc/AtomRC-Swordfish (use coupon code 'AdamGdoesFPV' for $10 off)
Thanks for watching and please remember to leave a reaction before you go 😃🙌🏻
Sweet Flight!!!!
Thanks :) Wish I could do more but the weather is so bad here at the moment :/
Nailed it..
Thanks Robert! A bit of luck with conditions on the day helped here 😁
Friggin awesome Dude 😎
Thanks 😊 I appreciate the feedback 👌🏻
Stunning Adam. Abs stunning 😍😍😍
Cheers Matt, just got lucky with the conditions on this day... was one of them where we nearly just went home 😅
Great footage and swordfish looks like a champ !
Thanks Alex 😊
Another fantastic video! Have not seen you in a while. Glad to see you're still doing awesome flights!
Yeah it's been a quiet year for me in FPV, for a few reasons, but hopefully back to it properly now 😎 Cheers!
Beautiful flight ☺
Thanks 😃🙌🏻
A perfect winters dream. ♥😎👍👍
Great editing btw.
Cheers mate, I appreciate it 😁🙌🏻
Because of your videos, i put a FPV cam on my asw28… great stuff!
Such a relaxing glider, hope you're enjoying it in FPV 😍
Always a privilege to watch your video's Adam ....A 1 day late Birthday Present for me But Better than the Rest ....!!!!!!!!!!!!!!!! ty
Happy birthday for yesterday mate 🎉 hope you had a good one, glad you enjoyed the vid 👍🏻
@@AdamGdoesFPV sorry ,,,my money is low ..... get ya a few Coffees soon ...I Hope All Is Well With You & yours
@@cptxeros If money is low please don't buy me a coffee, it's not necessary :) I'm happy with your support and comments 🥰
Awesome flight. Congratulation.
Thanks Peter! 😊
Wow need to get on the WTFOSD. Great content as always.
It's super quick and simple to install, well worth it. Thanks! 😃
@@AdamGdoesFPV you’ve inspired me and I’ve gone and done it. Installed on the Nano Drak and Lentus, off for a play tomorrow 👍
WOW beautiful.
Thanks 😁😁
Fantastic Adam, always pleased to see your notification pop up. Great footage, great scenery, great flights 👍
Thanks Mick, glad to see it didn't disappoint :)
Welcome back brother
Thank you 😎🤘🏻
Beautiful footage. Nice to see some new footage :)
Thanks 🙏🏻 😎
Nice to see new content 😎
Thanks Peter. It has been a while
Great video Adam. What a quality. Unbelievable. :O)
Cheers mate 😁😁🤘🏻
Great job with this amazing video!! I have a Swordfish and hope to maiden it soon but I'm new to flight controllers. Where do I get a thin "4-pin" connector to connect my AxisFlying ELRS receiver to one of the UARTS on the F405 NAVI flight controller? Thanks!
Thanks :) If you just mean the servo connectors then go on amazon and search dupont connectors. You can find packs that come with the pins and multiple size connectors. Cheers
Love the cloud surfing aesthetic! What's the Swordfish' yaw authority like? How does it compare to the Albabird? Thanks!
Cheers mate 🙌🏻 Swordfish doesn’t have much yaw authority. Especially compared to Alba. If you use the rudder it just seems to dip the nose rather than yawing.
Putting DJI goggles over the ear is something I never thought of but it makes a lot of sense. They just don't want to stay on the forehead during launches
Yeah I find them really hard to balance on my forehead like my analogue goggles, just a small bit of movement and they fall over my eyes. One of the reasons I’d like to upgrade to the goggles 2 if they sort out the firmware situation.
Gr8 watch. i look forward to flying mine but for some reason the motors wont turn when i arm. Any idea what could have cause it to not turn. was working before.
Thanks. Could be many reasons why motors aren't tuning. Too many to list. I'd check over all your connections, tx config and inav config if I were you. Remember they will only spin when the plane is armed
I always like fixed wings because it feels thrilling that you need to keep on moving forward to keep you flying unlike 'drones' - it can hovers around. Is that why you don't fly drones in your video?
Yeah exactly. I feel a sense of accomplishment flying fixed wing and don’t get that satisfaction flying multi rotors 👍🏻
I love the photo at the end ❤ the 🗡️ 🐠 is really a whole different animal to fly I’ve flown mines in 25mph steady winds and she acts like it’s a calm day 😂 too bad your location is too far from 🇺🇸 I’d meet up and we can get another bird up there to fly with and get some more great views
Glad to hear you're enjoying yours too! Nice plane, getting on well with it so far. 25mph sounds strong for it but glad it handled it for you! And yeah you're a bit far from me 😅
Do you use the f405 NAVI? Layout is cleaner than Matek.
Yeah I use the FC that came pre installed. Works well enough, a couple of small things about it that I like less than Matek though
Nice video as always Adam..... So is the video from the air unit SD or the DVR SD with the wtfos overlay???
Cheers Dave
Hi David, the recording are all from the goggles DVR file, so this is exactly what I was seeing live. After the flight there will be 3 files on your goggles, the video, .srt and .osd. You then use an online tool to overlay the osd on the DVR file using the files from the goggles SD card. Cheers
Shit like this makes me want to put DJI or HDZero on my graugans build, that view is so damn good.
Yeah the image from DJI is stunning and with the full OSD it just got even better! 🙌🏻
My friend..... ???? .....Omg that is one bad ass video! Fuck me.....!!!! It's so awesome I can't even express my gratitude and respect I have. It's killer! Thank you.
Haha glad you liked it 🙌🏻😅
great video as usual, curious to know how to mounted the air unit, I'm thinking of buying a swordfish and adding the caddx vista for FPV but I'm worried it will overheat, did you have any issues?
Hi, I just placed the AU in the space on top of the plane that is designed for your digital vtx. No issues with overheating ever, and that on 1200mw. Check out my latest Swordfish video and there's a shot of the setup at the end. Cheers
@@AdamGdoesFPV legend, thanks man, I'll have a look. Been setting up my swordfish today, just need to get the pan servo installed then I'm gonna have it up in the air.
@@AdamGdoesFPV got my swordfish up in the air, its amazing!! thanks for inspiring me with your videos from it :)
Awesome view! Just finished my swordfish with iNav 5.0. Do you get any more stability from the bottom tail fins?
If I’m honest I never flew it without the fins. For me they are an essential item as without them I wouldn’t hit CG with the 3000 4S I’m using. Keep an eye on them on landings as they can be ripped off. Cheers 😁
Conditions were rare, made for a great video...Are we looking at live footage recorded on the goggles with OSD.?..Or is it onboard footage from the Air unit with OSD overlay applied? 🤔😳😏😏🇬🇧
Hi ET, rare conditions indeed, which I wasn't expecting! The footage with the OSD is DVR file from the goggles, there is no 'on-board' recording from the Swordfish. Everything you see from the AR Pro is from an Osmo Action 3. Cheers
@@AdamGdoesFPV It looked great...not the best lighting conditions. I'm fairly used to the OSD overlay tool now. It means you can lay OSD over any HD footage from different sources provided the frame rate matches...It works great for me...Where do you get your 360 panning servos???...🤔😳😏😏🇬🇧
@@EnglishTurbines Lighting was difficult for any camera but the Polar handled it well. Unfortunately the OA3 was purchase don the way to the field and needed a software update to enable HDR so that struggled with the light too.
Pan servos I use the following and mod them with 2.2k resistors for approx 300 degree rotation:
-Banggood one ► tiny.cc/180panServo
-Hobbyking one ► tiny.cc/R5180MG
@@AdamGdoesFPV Thanks for the info, both sources are on backorder for that 180 servo...🤔😳😳😏🇬🇧
@@EnglishTurbines seems to be the way these days 🙄
Adam .
That was awesome 👍
Did you have dynamic power on or off on the crossfire tx?
Greetings from Mayo.
Hi 👋🏻 yes Crossfire is on dynamic mode, you can see the tx power output in the top right of the osd. For most of the flight it was between 25mw and 100mw. Cheers 😊
@@AdamGdoesFPV Hi 👋
Oh yes🤦 that's right, it's there...
Thank you 😊
😍
Thanks 😊
Been thinking about getting that sword fish. Would you recommend it, and what do I need to take into account of anything? Cheers
It's a good plane and a really nice all rounder. A lot good going for it. Potential down sides you should consider:
- Not designed to take a lot of battery, i fly with 3,000 4S lipo.
- Not a good design to carry a bulky HD cam like a gorpo, and maybe not great for smaller ones either
- If you like using a lot of rudder, I find it really ineffective on the Swordfish.
@@AdamGdoesFPV Ok. So if I keep it say 18650 Li-ion. With an fpv with built in hd cam. I should be good? 🤔
@@k1ortia yeah you’ll be good with that 👍🏻
@@AdamGdoesFPV Cheers mate. I'm going to place my order. Much appreciated..👍🏽
What a fancy OSD you have... What is it?
WTFOS with SneakyFPV fonts. 👌🏻
what is DJI WTFOS? particularly wtfos
It’s custom firmware for the DJI goggles and transmitters designed outside of DJI. They made it possible to root hack the goggles and install this firmware which gives you a lot more control and features, with the main one being MSP display for full OSD which is awesome. It also means you can record your OSD like I have in this video. Google it and you’ll find their site, super easy to do and user friendly.
@@AdamGdoesFPV thanks so much for your explanation.
Buying the fpv kit is really expensive . You must have a healthy wallet
Hi 😊 the version I have is ‘RTH’ which is $234 with the 10% off coupon. I’m not here to try and sell it, but I don’t think that’s a bad price considering it comes with 2 motors, 2 escs, 4 x digital servos, an F405 FC and a 220 GPS… all pre installed with iNav on it ready to go. With the way things are these days I don’t think it’s a bad deal but I’m always very interested to hear other opinions 👍🏻😃