Restoration Antique Hand Operated Chisel Mortising Machine // Complete Amazing Restoration
HTML-код
- Опубликовано: 30 дек 2021
- Restoration Antique Hand Operated Chisel Mortising Machine // Complete Amazing Restoration
#restorationsskills , #restoration , #restore , #restoring
#RestorationAntiqueHandOperatedChiselMortisingMachine,
#CompleteAmazingRestoration
Welcome to the channel: Recovery Skills! In this episode we found a very old mortise machine, very big and heavy. and no longer works. The height and width of the chisel are adjustable. We worked hard for many days. I did my best to show all the work and I am sure that my method will be improved in future videos. I think all the hard work in this project will bring this mortise machine back to life. Our mission is to entertain and give you the opportunity to discover forgotten tools. Please subscribe to my channel so you don't miss anything. Thanks for watching and supporting me. I really appreciate this! Thank you very much!!!
Полный писец. Криво просверлены резьбы, покрашены направляющие и винты тоже покрашены. Жалко не показали процесс сверления ручек что они аж посинели. Сопрягаемые поверхности тоже покрасили.
Но ничего большинство народа уже технически безграмотны, им и так сойдёт. "А раньше мы делали микросхемы" - цитата из одной книги, часто ее вспоминаю.
Ну...а по подшипнику молотком... хоть бы трубку взял, меня аж передёрнуло)) Но с другой стороны, нужно отдать должное - хоть так, но сделал- молодец! В большинстве эксперты то - диванные, которые тяжелее х...ручки ничего в руках не держали)
Руки бы ему оторвать за такое - добрую сверлилку испоганил и ещё показал это всем..
+
окрасить направляющие это на века)))
Подшипники забивать молотком по наружному кольцу!!?????
9:28 Big mistake. The outer ring of the bearing is never struck while it is being inserted into the shaft.
You should hit the inner ring with a pipe.
I am happy to receive your feedback, advice, suggestions to improve myself better. I really appreciate this!
Thanks for watching and supporting me. Thank you very much!!!
@Piotr Ś. When he paints the sleds, he'll think he's done a nice restoration. Until the paint peels off and a bad sled gap appears...
ازویدئو خوبتون متشکرم
painting over all the guides is such a pleasure
подшипник просто потрясающе напрессовал! 😃
I am happy to receive your feedback, advice, suggestions to improve myself better. I really appreciate this!
Thanks for watching and supporting me. Thank you very much!!!
Шедеврально!!!
Ага, ушатал ещё при установке 😁, это называется +100 к ресурсу😂
а покраска направляющих? ваще огонь😃
вы тоже не поняли с термоусадкой и припоем? 🤣
good enough for beginer class...!!
Meticulously cleaned and painted the motor BUT put rusty screws back in! NEVER hammer bearings in the way you did, they may well be damaged now, use a tube or pipe a little larger than the shaft and then hammer down on the tube also as someone stated here never paint the sliding surfaces. Looks good though and is functional.
Thank you very much
The rule of thumb is one never transfer assembly forces onto the balls and journals of the bearings, whatever situation one gets into always keep in mind the balls should never transfer the forces required to fit the bearing be it fitted in a hole or on a shaft, chose tooling accordingly. high precision bearings from that hammering would have been already damaged. for these deep grove ball bearings one might get away wit this hammering without a damaged bearing journal but still it is bad practice. it causes a little pit in the journal and the bearing destroys itself eventually
Just completely rebuilt an older Rigid 13" planer...
I replaced the bearings on the cutter bar shaft.
To ease their installation I put the cutter bar in the freezer for a couple of hours, result was about 25 degrees F, which shrank it maybe a thousands ... Then as crazy as this sounds...I soaked a rag in water, wrapped the new bearings in the soaked rag, and put that into the microwave...for about 2 minutes. (Yes...Metal in the microwave)... It heated the bearing case (with steam) to about 180-200 degrees...no sparks... giving me an expansion of another thousandth. The bearings literally slipped right on, no hammering...
@@dongalloway6888 Well, how did the side rubber seals feel after the microwave? Or were they open bearings? In general, the practice of mounting bearings involves heating in hot engine oil.
@@_MadFox no change in the seals at all...My particular bearings were sealed but had a Plastic type seal as opposed to rubber...
This was my first attempt at doing this, and I'll admit I was Leary but once I saw how simple it was...it wasn't an issue...and if you're wondering...I have used the planer, and it works fantastic...
From the manufacturer the bearings and components are rated for a substantial amount of heat...With the microwave and the parts wrapped in a wet rag...the heat, and expansion is created from steam...
He sure is rough on new bearings.
ពេញចិត្តណាស់
Отличная работа, если ты хотел добить этот станок
Thanks for watching and supporting me. Thanks a lot!!!
Lf
Хороший станок получился. Вот, только, направляющие зря покрасил.
Thank you very much
Hard work ( The best)
Very high class for a wood work...
Nice machine with little bit more accuracy this can be use for a steel as well.. 😉👍
Thank you very much. Please follow and support us!
Excelente trabalho. Amo ferramentas.
Wow! nice 👍🏻👍🏻 🇮🇳 Kuki 19|08|2022
Ball bearing inserted with a hammer by hitting the outer ring? Painted dove tails? Brrr...
Thank you for your interest
@@restorationsskills4967 Jun Yb
ج توجد ط،
@@restorationsskills4967 q
قیمت ضبط
Jako lepo radiš ovo ,osim što čekićem udaraš po ležajevima što se ne radi
Wow ! Thật tuyệt vời
scissors adjust, replace the lantern on the machine, the impeller needs to be changed, do not paint the rubbing area, replace bolts, install new bearings correctly
Thank you very much
Thank you, you said it all for me.
... And the rotor is not balanced.
Делаю вывод: ТЫ имеешь возможность заявить о себе, ТОЛЬКО БЛАГОДАРЯ ЗАСРАНЦАМ, СПОСОБНЫМ ДОВЕСТИ СТАНОК ДО ТАКОГО СОСТОЯНИЯ!!! Вот их все ругают, а ты должен благодарить )))))))))))))))))))))))))))))))))))))))))))и ещё, ну это так на всякий случай: Во всём мире, все нормальные, (граждане, которым справка не нужна) знают - что, направляющие, винты, зубчатые колеса а также зубчатые планки сопрягающиеся с зубчатыми колесами, НЕ КРАСЯТ, И НЕ СМАЗЫВАЮТ ТАК ОБИЛЬНО ГУСТЫМИ СМАЗКАМИ ТИПА САЛИДОЛА, ЦИАТИМА и Д.Р. Смазки М 20 (машинное масло) вполне достаточно! Через месяц интенсивной работы, все места сопряжения набьются стружкой из под обрабатываемых деталей и тебе придется все это разобрать и вымыть. Направляющие, типа ласточкин хвост, нужно отмыть от краски и грунтовки и легонько ПРОШАБРИТЬ дабы после сборки на ней оставалось небольшое количество смазки что бы не ржавело и легко ходило Но ты мог этого и не знать, но теперь знаешь! .......................................................
Thank you very much
А ещё, подшипники молотком не загоняют, по наружной обойме....
Никогда не понимал людей, которые называют реставрированием тупо чистку и покраску причем там где она совсем не нужна. Ладно патрон покрасил, но направляющие и сверло это надо умудриться.
I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better
!!!I Apologize For The Mistake If I have Made In This Restoration
!!!Thank You For Watching The Video. Don't Forget To Like And Subscribe To Channels
I'm deaf in one ear and going deaf in the other but I could still hear that the motor was out of balance so it will chew the bearing one day but it didn't sound to bad. I used to rebuild them for a living.
Yes, thank you for your comment
Parece que os rolamentos sao novos mas ele estava usando o martelo para coloca-los no lugar !!!!
Muito bacana a retificação da máquina Chow de bola..❤️👏👏👏🤠👍🥀
Ha fatto un lavorone con bravura e competenza. I miei complimenti e se fossi un imprenditore lo assumerei subito. Molto Bravo 10 e lode
装轴承的时候应该敲击内圈，或者用油浴加热后安装。
Man, sliding and mating surfaces are rarely ever painted on functional machines. its like painting the internals and the cylinder surfaces of a bearing before assembling it, or the screw for tablefeed, it would make no sense.
I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better
ITS Inteligency demoníac..estraterrestrial
I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better
Wow so much Amazing wow that very good 🙏🙏🙏🙏🙏🙏💯💯💯💯💯💯💯💯💯💯
Thank you very much
OK. Good work!
Faltou limpar a ferrugem dos parafusos. Parabéns ótimo trabalho.
Está Extraordinario lo que hace el señor y felicidades por su labor
Vc está de parabéns! Haja paciência
good job
Thanks for watching and supporting me. Thanks a lot!!!
Muy buena restauración grasias por compartir maestro
Thank you for watching my video
@@restorationsskills4967 Watch> ruclips.net/video/R_DJrWCMQfk/видео.html
Thanks for
I'm a fitter and Machinist by trade and if I saw someone driving a NEW bearing on with a hammer, on the edge of the race I would belt the person on the head with that HAMMER. You use a pipe the correct size of the INNER race to CAREFULLY seat the bearings, or use a press. By the way I used to use a morticer like that in a cabinet making shop 46 years ago.
Thanks for your videos on restoration of power tools because this way I got an idea on how to do the same thing with either broken old tool or tools I find on the street even make my own power tool with much experience ; only thing is I need a lathe machine to make pieces or custom pieces.
Fascinating project!
Bearings must not be driven in with a hammer. When they are put on the axle, you need to use a tube and apply force to the inner ring. Bearings damaged! Bad repair!
True, young padawan.
A Ferrari, this is not!
ржавые болты обратно вкручивает. гениально:)
SPECTACULAR !!!!!!!!!!!
What a difference of Night and Day great job enjoyed watching it
Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!
за закашненаравляющие можно руки оторвать,за остальное...это он восстановлением назвает?
You have several work benches. I especially like the one with fake grass surface lol
Ну что сказать? Мастер класс по ДЕБЕЛИЗМУ! Закрасить всё направляющие, потом их обильно смазать, интересно что он будет делать через месяц работы на нём, когда от древесной пыли всё закоксуется? Будет реставрировать от этой реставрации? МаЛаДЭЦ! Жаль болты не покрасил.
I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better
Nice job just good to see that motor earthed as you was wiring it up at the time
Thank you very much
Plus to you for appreciating helpful comments.
It is not good practice to seat new ball-bearings onto the shaft by hammering on the outer race. This hammers the race against the balls which then hammer against the inner race. Microscopic damage (sometimes even chips) is done to the balls and races and they will fail sooner
Always use a tube or sleeve which pushes only on the inner race, to move it along the shaft. Pressing is best, but hammer if that's all you've got.
100% All Right
Waww very good.
Thank you very much
Estava indo bem, mas tinha que bater o rolamento novo com o martelo e justo na pista externa?!!
Foi uma boa reforma, mas longe de ser uma restauração, mas ficou funcional.
Wszystko pięknie wymalowane nawet prowadnice.....
krzyczałem "nieeeeee!!" i wyłączyłem ten film
@@rafawesierski1901 самый лучший комментарий🤣👍!
💑💑💑💑💑💑💏💏💏💏💏💏💏🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🤚🤚🤚🤚🤚🤚🤚🤚🤚🤚🤚👰🤴🙎♂️🍂🍁🥀🌹🍀☘🌿🌾🌵🌴🌳🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷
Thank you very much
Veri nice!
Thank you for watching the video and supporting our channel
so cool.
well done
Chique show 👍👍🎸 Tmj!!!!
Absolutely fantastic job...Love the colors and the detail, I'm 64 years old and I've been doing this myself for years, just not smart enough to video tape it and post it on RUclips...
I firmly believe that the "Older tools" were made stronger and better, and most just need some TLC to get them back in top shape again...
A couple thoughts if I may...
Less grease...LoL...most surfaces just need a light film of grease...
also the "Milled" surfaces that slide on each other...usually aren't painted. They have been milled within thousands of an inch and as long as the surface is clean and again have a light film of grease, they'll slide perfect.
When they are painted, even the paint can add a few thousands of an inch to the surface causing restrictions.
Keep up the great work..
I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better
Agreed. All of the extra grease will attract dust and dirt. Not too late for him to wipe off the excess.
ÇOK BAŞARILI ELİNE SAĞLIK USTA
I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better
!!!I Apologize For The Mistake If I have Made In This Restoration
!!!Thank You For Watching The Video.
👍👍👍👍👍👍👍👍👍👍👍👍Молодец!!!!!!!
Muito bom
Beau travail ,sympa la couleur 🤩🤩🤩🤩
Fantastic restoration
congratulations friend great job 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷
Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!
Hola Amigo eres increíble... Saludos desde mi país PERÚ - LIMA departamento de AREQUIPA.. un abrazo y felicitaciones, con la demostración, nos inculcas nos amimas a todos los que trabajamos en Metal mecánica y mantenimiento. Yo ví el vídeo completo... La máquina Fresadora está recontra oxidada, ve mira el cambio es increíble, Dios té Vengiga..(y) soy fan número 1.. mi nombre es JHONY MIDHUAR.Ll.C. hasta luego 🙂✨ cuidese mucho 😷🤗...
Thanks for watching and supporting me. Thanks a lot!!!
Красафчик... Все рабочие, трущиеся поверхности и резьбы покрасил. Голова два уха.🤣
Thanks for watching and supporting me. Thanks a lot!!!
Одячщллецшбкйеш будеш лйкмнуомалегаа6ео7а5зо9еєдг97е96к
great restoration
Направляющие залить краской это сильно!!))
Fasinating to watch the method of this being done....
I am happy to receive your feedback, advice, suggestions to improve myself better. I really appreciate this!
Thanks for watching and supporting me. Thank you very much!!!
Buenísimo, saludos desde Chile 🇨🇱
Great job!!
Amazing your job, greetings from Colombia (South America)
bon travail
Thanks for watching and supporting me. Thanks a lot!!!
Nice work my friend! I wish i was as sklillful as you are. 🤝 from Brazil 🇧🇷🇧🇷🇧🇷
Thank you very much
Amazing, well done!
I am happy to receive your feedback, advice, suggestions to improve myself better. I really appreciate this!
Thanks for watching and supporting me. Thank you very much!!!
Muito bem goste🇧🇷🇧🇷👏👏👏
Thanks for watching and supporting me. Thanks very much!!!
you did a super job!!
super tare
Thank you very much
Um bom trabalho.. só faltou capricho, mesmo sendo uma máquina rústica, deveria ter isolado as guias deslizantes antes de pintar, com o tempo vai incrustar a tinta nas guias..indico um canal para ver como se faz uma restauração : Hand Tool Rescue.
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the mistake if I did in this restore!!! Thanks for watching and supporting me. Thanks very much!!!
This was a repair more than a restoration, but a cool machine, nonetheless!!!
!!!Thank You For Watching The Video
Respect
Thank you very much
I do agree with a lot of commenters here... greese on paint will be major pain in the long run ... but good job overall
Excellent job.
It appears to be a heavy duty well manufactured machine, I hope you got it for a song. Looks nice!
very nice job well done
Que trabalho bonito e bem feito.... valeu pelo esforço.
Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!
Интересный станок!
I am very happy to receive your feedback, advice and suggestions to improve myself more and more!!! I apologize for the error in this restoration
молодец оживил станок лайк за труды
PARABENS NOTA 10
Thank you
Para muitos uma ferramenta como essa não tem valor, mas para mim, não tem preço.. 👍🤝
Rulman çekiç ile çakılmaz eski paslı cıvata kullanılmaz no no no
Qui torno da hora muito bom👍🇧🇷
Thanks for watching and supporting me. Thanks very much!!!
Beautiful job!
Thank you for watching my video
Woww👍👍super
Bravo!!!!
Superbe restauration
Bonjour de France
Thank you very much
Fantastic restoration of a very well-built and useful tool. However, as mentioned by another viewer, the ways on sliding machine parts should never be painted. In addition to the clearance issues, over time the grease will dissolve the paint combine to make a sticky mess. It doesn't take long to mask the affected parts.
I am Happy To Receive Your Feedbacks, advices, Suggestions To Improve Myself Better
A professional restorer NEVER uses an orbital, not any other type of sander, on machined surfaces. This was a hack job.
@@wrongfullyaccused7139 And never use insulating tape to electric insulation, etc. :( This was NOT a restoration, and NOT a job. Just something faily thing. :(
@@rockersrac ;The issue I have is that Mortiser was once a fine machine tool in its' day. It deserved greater attention and a skilled craftsman. You are correct, it was a fail posted as a "restoration". Have a nice day.
@@rockersrac For a hundred years, people have been using insulating tape without problems, but now terminals and heat shrinkage have appeared, and everything old is anathema. How tired of these "professional" tips...
あんに錆付いていたマシンを、見事に復活差せたのですね?
It's not like a restoration, it's more like a painting
ficou muito bom..mas no mantas da bomba devia botar parafusos novos gostei 👍muito
Oh, I see. An orbital sander used on machined surfaces? Thank you, I understand much better now.
Thanks for watching and supporting me. I really appreciate it! Thank You Very Much!!!
Супер 👍😄
Такой станок и не грех во фрезер переделать. Столько мяса на деталях. Шпиндэль фрезерный только приделать.